Wireless Joint

Took forever to fix my machine, but here is the first I could get done: https://thewirelesshaven.com/help-page-nexs2go/ NOTE: It is 100% untested. You can always recover, but I have to say I haven't tested it and will not be able to for about a week or so. Much going on right now. No worries, same ...

Are you also working with the BPI3 mini? I have whatever is in the prebuilt modem you guys sent me. My order #xxxxx Not what I meant :) There is a user on another forum for a SBC, like the raspberry pi, that has a similar username as yours. I checked though, different username :) Oh gotcha. No, I'v...

Didneywhorl wrote: ↑Sun Sep 24, 2023 4:01 pm Are you also working with the BPI3 mini?

I have whatever is in the prebuilt modem you guys sent me.

My order #xxxxx [Mod edit for privacy]

Took forever to fix my machine, but here is the first I could get done: https://thewirelesshaven.com/help-page-nexs2go/ NOTE: It is 100% untested. You can always recover, but I have to say I haven't tested it and will not be able to for about a week or so. Much going on right now. No worries, same ...

Awesome! Thank you for the continued support!

I performed this step, and things were working, then the modem was disconnected by something internally. I rebooted, still not showing anything for the modem. My PC recognizes the modem with the same cable being used for the NEXS2GO, connects to my PC and works without issue. I've attached all the ...

I performed this step, and things were working, then the modem was disconnected by something internally. I rebooted, still not showing anything for the modem. My PC recognizes the modem with the same cable being used for the NEXS2GO, connects to my PC and works without issue. I've attached all the l...

Didneywhorl wrote: ↑Thu Aug 03, 2023 5:51 pm Navigate to the page: Network->Interfaces and edit the LAN. On the Advanced Settings tab and delete the IPv6 IPs from the Custom DNS Servers.

Reboot.

I'll give it to go and do some testing!

Also, Thu Aug 3 13:21:24 2023 user.notice nft-qos-monitor: ACTION=update, MACADDR=7e:0a:11:c4:6f:c1, IPADDR=192.168.1.159, HOSTNAME=Pixel-6-Pro Thu Aug 3 13:21:24 2023 user.notice nft-qos-dynamic: ACTION=update, MACADDR=7e:0a:11:c4:6f:c1, IPADDR=192.168.1.159, HOSTNAME=Pixel-6-Pro Thu Aug 3 13:21:25...

This is a Calyx T-Mobile hotspot plan. I believe it only has a ipv6 option, though the router can translate that over to ipv4 somehow.

I have tried to make the APN IPV4 only, but then it will not connect.

That's the way I had done it.

Took it back to factory and navigated to flash the new firmware, then flashed 2 more times.

I'll do it once more to see if it might help, but this is the same issue I have been having since day 1

The hub works with my pc without issue. I had no problem with maintaining a data connection with it connected to my PC once introducing the hub. I tested this by downloading a fairly large file overnight, which it was able to complete without any issue. As I want to be able to use this product in ot...

NEXS2GO will not recognize the modem when it is behind the hub. I'm attaching different log files from the NEXS2GO. What I did was flashed it to the latest firmware, WiFiX-NEXS2GO-GO2023-01-12, then hooked up the modem. First through the hub, no dice. Direct to NEXS2GO, internet seems to be working,...

Preliminary testing seems like this has resolved being connected straight to my PC.

Will the NEXS2GO recognize the passthrough from this hub?

Do you think that this is what was causing my issues on the NEXS2GO as well?

Here you go

Is the modem itself rebooting, or is the connection to the cell network dropping, but modem still present? The Modem Connection Logs should show this. Alright. I checked Windows Event Viewer when it disconnected the internet again. I've attached the line items around the time it happened. Hoping th...

So. A little after I first received the unit, the LED stopped working.

Is it possible that there is some sort of internal damage that is causing power supply issues?

Can I check the volts/amps being received via the command terminal somehow?

What about using like an adapter to covert to USB-C from micro-b, then using a power delivery port on my laptop for a connection?

Or would I just be better served getting a powered adapter?

Would this work? or do you have a recommendation for something that would work?

Unfortunately I don't think Windows logs cell connections. Have you tried using a powered USB hub with it? The EM9191 is known to be power hungry, causing the actual voltage to drop below levels that trigger reboots. Most USB ports aren't well regulated as they aren't really made for heavy power us...

Any ideas as to why the modem will just drop out?

Is there something I can run to gather logs to monitor it?

Is the modem itself rebooting, or is the connection to the cell network dropping, but modem still present? The Modem Connection Logs should show this. I'm not entirely certain how I can access these via Windows, but from what I can tell, the modem is staying connected, but will not show a connectio...

Hi all, I've had an ongoing issue with my EM9191 since I purchased it. I got the NEXS2GO as well I believe, and have been plagued with slowdowns and disconnects. Using the Quanta 5g modem Calyx provided me with my plan, I've had less issues from the NEXS2GO, but ultimately ended up using a GliNet Fl...

If it helps, In my Goldenorb router when I would connect the dynamic interface (464xlat) it would create would not have the TTL Settings applied. I had to manually go to create a IPV4 and IPV6 iptables rule to apply to that 464xlat interface. Once I did that, I was completely unthrottled. Sorry to ...