Wireless Joint

FYI, the flash has plenty of space so I upgraded modem firmware by sending the most recent file from Quectel over to /tmp via SCP and running QFirehose -f /tmp/firmwaredirectoryname And yes, after you update the modem firmware to the most recent Quectel branch you will get notices from Netgear that...

Just a heads up that after upgrading to newest Quectel firmware and disabling NSA (forcing SA) I'm getting 360+Mbps down, so doing better than my other WG1608/Quectel RM500Q-AE based routers at the moment. Thanks again to hazarjast for the compilation of info. CA reporting: +QCAINFO: "PCC"...

What processor/cpu is inside this model? Specs on the web for are only showing clock speed but no specific cpu label root@NBR750:/proc# cat cpuinfo processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 48.84 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32...

If you SSH into the device just run 'IP a' and that will spit all the interfaces and their names for you.

Thank you gilbreen my firmware version is RM502QAEAAR11A02M4G_01.003.01.003 is there a way to downgrade the modem version? I have seen in the web control access of the router a place to update it manually but I don't have the source file to do it I don't believe there is a way to downgrade the mode...

Recently picked up an NBR750 5G and used a lot of the tips in the NBR Mega-Thread . I figured I'd share a few other things I found: - TTL:. If you want to adjust TTL and HL on a more permanent basis as well as set values for HL, and have enabled telnet or SSH you can add the appropriate IPTables to ...

Yes, folks have done this. It's officially supported and tested by Voxel in his firmware. If you are looking for support for a specific issue I would suggest posting over at the SnB forums: https://www.snbforums.com/threads/custom-firmware-build-for-orbi-lbr20-v-9-2-5-2-37sf-hw-v-9-2-5-2-37-1sf-hw....

Hoping I missed something, but has anyone sorted Wireguard (client) on this yet? Yes, folks have done this. It's officially supported and tested by Voxel in his firmware. If you are looking for support for a specific issue I would suggest posting over at the SnB forums: https://www.snbforums.com/th...

hazarjast wrote: ↑Tue Jun 21, 2022 11:42 pm ...
[*]How to setup DNSCrypt/stubby/OpenVPN/WireGuard or Something Else

Hoping I missed something, but has anyone sorted Wireguard (client) on this yet?

Wow, thanks for being awesome and contributing to the community as always! I don't even have an LM1200 yet, but greatly appreciate this info and driver share! (Gonna get one soon)

I assume you've already tried rescue as described here:
https://fccid.io/2AH9TW826/Users-Manual ... al-2994820 and here
https://openwrt.org/docs/guide-user/tro ... _partition

Update: Managed to get a single connection to go through after firmware update on modem. Now back to modem restarting.

New 1608 and RM500Q-AE and I'm having the strangest thing, modem (not router) resets itself every 60 seconds or so. I'm presently running newest snapshot of GoldenOrb_2023-04-06 ( OpenWrt 22.03-SNAPSHOT ). I've tried prior stable and other snapshots as well, but same behavior, the modem resets itsel...

Klaus4 wrote: ↑Sat Jan 28, 2023 4:52 pm I fixed it. It still have ATT Firmware in it but I hope that it will work in the EU

Thanks

Could you share what you did to fix it? Thanks!

EDIT: Using a different SIM worked and get expected speeds now. Very weird. All SIMS from same order, but just didn't like that one I guess. I have an MR1100 I'm running on a T-Mobile tablet biz plan. The MR1100 has magic'd and I created a shell script on it that runs in init.d that sets the TTL: /e...

Klaus4 wrote: ↑Sat Jan 28, 2023 6:12 pm Hi!

I solved the bootloop but wanted to change to the EU FW. But it didn´t work out is there any fullflash for the EU version one I can use for a try to reflash it.
thanks

by the way is it unlocked after the new flash?

Anything in particular you did to solve the bootloop issue?

I've managed to successfully clone 18 out of 20 pieces of the MR1100 flash (MTD bits), but when I try to do anything at all to mtd1 and mtd2 the router immediately reboots.. I imagine it's because I'm pulling from a live device and have been banging my head against the wall playing around with UBIFS...

I don't believe this question is out of bounds, but if so, please let me know and I'll gladly withdraw. I have a clear understanding of why some need to make some magic happen to modems when it comes to IMEI. I was recently told that some magic applied to the modem serial number is also a necessity ...

Just wanted to send a hearty THANK YOU to @JoshKelly, @Didneywhorl, @vahnwinkle and anyone else who contributed to this thread. I've spent the last week pulling hair out trying to get a few EC25-AF's firmware updated before ATT kicks the old ones off its network. Lots of fun with Quectel support, tw...

Thanks to the awesome help here I have slain my last dragon: getting Visible to reliably work in ANY device (in this case a WG826-T2 w/ an EC25-AF). All hail ya'll (and especially Chumble , vallkor , and Yipzy specifically) I've tried plenty of different AT commands from the command manual and for t...