Wireless Joint

Can confirm this issue on Verizon with the same configuration. Send sms just fails with a timeout.

I would recommend the solder points for the power input barrel plug, this is at 12V at between 3-4A. As long as the fan isn't drawing more than ~150 milliamps, it should not affect the router. Just note, this fan will be on constantly, with no means to control the speed. This would require an additi...

I have the same setup and I'm not experiencing any of these problems you're describing. The only suggestion I can recommend is make sure you are using the 4A adapter that was included separately, not the 3A adapter included with the router. This should minimize the potential of starved power on the ...

Didneywhorl wrote: ↑Sat Jan 21, 2023 9:23 pm Yeah, the internal mini-pcie is USB2, whereas the USB port on the outside is USB3 (10x the max possible speed 480Mbps vs 4800Mbs)

Internal space is also too tight to fit it in there, properly.

Good to know, thank you!!

I'm very happy with my investment. I got the APN programmed and it's working very well, although I'm just a bit curious. The package came with the USB3 to m.2 modem adapter and the NEXS2GO router. I'm curious if the USB3 adapter allows for better bandwidth rather than using the internal PCIE port wi...