Wireless Joint

[*]I've tried the firmware versions ending in 2023-01-12a, 2023-03-15, and 2023-06-01a. Try this firmware version. Run it from recovery menu. Do not keep settings and force. WiFiX-NEXP1GO-GO2021-09-11 ( WiFiX-NEXP1GO-GO2021-09-11a.zip ) https://drive.google.com/drive/folders/1C9c8yUCrpC0tS4g6RZ0yaO...

So I looked inside the 9-10-2021 firmware and I randomly (I have so many versions to choose from now, downloading so many builds, lol) chose 10-15-2022 to compare it against, and there are some major differences. I came upon this thread https://wirelessjoint.com/viewtopic.php?p=2600#p2600 showing th...

Before starting, I was banging my head on the table because I never had a copy of my original firmware. I regretted not using that MTD option to pull a copy of the ROM. Something I can revert back to if all else fails. Luckily by finding that firmware, all is good and I have more confidence to try m...

Nevermind, RESOLVED (sorta). I found my original version shipped via this drive link posted from thread (https://wirelessjoint.com/viewtopic.php?p=9752&hilit=NEXQ6GO+drive#p9752) The google drive link shown there (https://drive.google.com/drive/folders/1few_ljURycBckp9P4uo09TbD7Y2WNETn) hosts so...

Does anyone have any copies of any older WiFiX-NEXQ6GO-GO2021-2022 firmwares they downloaded directly from the WiFix help page (https://thewirelesshaven.com/help-page-nexq6go/ )? Not from http://aturnofthenut.com/autobuilds/ , or https://drive.google.com/drive/folders/1x01z94Yfa5wAEGSiNqSQAxzwoe8yFn...

This is weird. With WiFiX-NEXQ6GO-GO2022-01-01-AB19. I was getting no connection and / usb errors. Another weird thing too: Tue Jun 27 20:32:44 2023 : /dev/ttyUSB2 AT+CNMI? +CNMI: 1,1,0,2,0 OK Tue Jun 27 20:32:46 2023 : /dev/ttyUSB2 AT+QINDCFG="smsincoming" +QINDCFG: "smsincoming"...

GoldenOrb_2022-12-29(ab19) flaky connection but finally got it to connect ,Band GUI exists. only getting Ipv4, no IPv6. was getting alot of timeout and no /usb2 found in debug log until i reset/power cycled and it finally connected but ipv4 only.


Wll try WiFiX-NEXQ6GO-GO2022-01-01-AB19.zip.

GoldenOrb_2021-11-02 worked (WiFiX-NEXQ6GO-GO2021-11-02-AB.zip) got IPv4+IPv6 no band GUI GoldenOrb_2021-11-16(WiFiX-NEXQ6GO-GO2021-11-16-AB19.zip) worked got IPv4+IPv6 no band GUI I guess will try newer build and see if I can find one new but not too new? AB19 seems to work. I'll try the latest arc...

I'm going to try flashing WiFiX-NEXQ6GO-GO2021-11-02-AB.zip and see if that works. I guess that's the last version before AB19. Then I will try WiFiX-NEXQ6GO-GO2021-11-16-AB19.zip which is the first of the AB19 releases. My current/reverted version is GoldenOrb_2021-09-17 flashed with WiFiX-NEXQ6GO-...

Then I started messing with APN names 'vzwinternet' vs 'VZWINTERNET'...still getting only IPv4. I tried shutdown/rebooting shutdown/power-cycle...and um..that's when I got ' SIM is locked with no SIM Pin entered in Profile!! ' and no IMEI and/or no /dev/usb2 found error in debug log. I freaked out a...

Also, another thing I tried was to power cycle the router. When it came back up, the modem would NOT connect--I think due to a time mismatch, was getting alot of device not found /usb2 and error AT command...so while it was attempting/reattempting to connect, I opened another brower window and I wen...

One thing to note is that after awhile WAN1_6 will change from Device: Not present Connected: no, Protocol: Virtual dynamic interface (DHCPv6 client) to WAN1_6 Type: Ethernet Adapter Device: wwan0 Connected: yes RX: 706.96 MB (575157 Pkts.) TX: 62.38 MB (320595 Pkts.) wwan0 Protocol: Virtual dynamic...

So it is connecting to the internet? You're just not getting an IPV6 address? This is common, I've seen it from one connection to the next, and even one system to the next. It is odd. Run the AT command AT+CGDCONT? to see if the IPV stack is being presented as dual stack or IP only. The rest is up ...

So I flashed the router to 2022-10-05 which is the WiFix supplied firmware and default settings on flashing. When it connects, it still just gets an IPv4 address. Under Network->Interfaces global options/settings, that field is blank as well. I noticed this firmware dumped a bunch of various carrier...

The newer builds require you to delete the IPV6 prefix on the Network->Interfaces global options/settings tab at the top of the page. Delete the setting there, leave blank, and reboot. You'll need a newer build to get the band locking UI Thank you! I shall try that. I'll go ahead and try reflashing...

Greetings,, I finally got around to upgrading my WiFiX NEXQ6GO to a newer version of the GoldenOrb firmware. I upgraded from GoldenOrb_2021-09-10 (the version that arrrived) to version GoldenOrb_2021-09-17. It could have been from a lack of sleep, but when I had tried other builds (newer 2022 builds...

Update 1-30-22: It's been around 74 hours and it has not disconnected/gone weird yet. I guess that resolves it. I'm susprised it is that because while I do understand how a wireless carrier might null out connections that are not in use, my VPN connections were still on, so I would figure even the m...

10-4 will do as suggested. I have that option and connection monitoring is disabled/hasn't been touched. I will also reset modem connect logs so everything is nice an shiny (clean) and will report back with updates/what happened per ping/keepalive. Thank you. Update: 1-28-22 - Nothing to report so f...

Greetings Everyone: I just had some general inquires about my setup that I was hoping someone could advise to perhaps improve my connection. Generally speaking everything runs well when it's connected but about every 1-2 days I have to reset the modem. When the inet is "down"..I go into th...

EP06ALAR02A03M4G.zip - https://www.androidfilehost.com/?fid=17825722713688275641 EP06ALAR02A07M4G.zip - https://www.androidfilehost.com/?fid=17825722713688275640 EP06ALAR02A08M4G.zip - https://www.androidfilehost.com/?fid=17825722713688275639 EP06ALAR02A08M4G_01.004.01.004.zip - https://androidfile...