Wireless Joint

I just dealt with the "SIM Missing" issue on my WG3526/ NEXP1GO with RM502. The cause was the SIM enclosure pins not making full contact with the SIM card. My error was CME Error: 13. My solution was to change the modem adapter (PCIe to M.2) to one that has nano SIM slots. You can pick one...

My experience with setting and un-setting the band locking through the GUI is losing control over the NR5G list. The GUI will allow you to Band Lock both the NSA-5GNR and 5GNR Bands but will only allow you to unlock the NSA-5GNR list. In order to unlock the 5GNR bands, you will need to run the AT co...

Hmmm. So flashing a different firmware brought it back and then it left again? Did you flash the firmware like 3+times in a row to ensure some goofy setting isnt stuck in there causing trouble? Also, you may want to try and set the radio settings to a top or bottom channel, not auto, that isn't in ...

I can't see the 'WiFiX 5G' BSSID on any of my devices anymore. In the /Network/Wireless/ menu of the router, the 5 GHz radio shows 'Device is not active'. The radio1 icon is greyed out, while the radio0 icon (2.4 GHz) is blue and working. Here's what I have tried: 1. Clicked on 'Restart' next to the...

I appreciate the help Didneywhorl. I'll open her up to make sure none of the antennas disconnected and will try improve reception. Did you get your signal issues resolved? The Quectel modem antennas need to be connected as such: ANT1, ANT2: 2x2 MIMO pair for Low-Band and Mid-Band ANT0, ANT3: 2x2 MI...