Wireless Joint

Looks like I will keep using my 5g phone with visible tethered to a glinet router using the correct TTL settings (btw, I use the firewall ipv4 TTL set at 88 and IPv6 TTL set at 89). I then am able to circumvent the 5mbps throttle.and pull decent speeds up to 35mbps when I am not deprioritized. I dec...

Hello, what are the advantages of using this modem vs a 5g cell phone connected to a Glinet running Luci and applying the right TTL rules? My LBR20 is retired because I now have 5g bands and I can say the same for the 5g mimo antenna. So, beside being able to chose the towers to which to connect, wh...

Hello, I am having an issue. I had it all worked out and it has been working fine for a while but, now, I cannot modify the files I created (e.g. TTL mangling). For example, if I want to modify my TTLs, I normally use this command: nano mnt/circle/overlay/opt/scripts/firewall-start.sh I am not sure ...

Hello, I did not see any antennae listed recently. I am looking for Mimo antennae 2x2 or 4x4 for my LBR20. Best if they are 5g compatible. PM me as to not clutter this forum. Thanks.
Hydro

Hello, I still am unclear about how to get openVPN on the orbi lbr20 running Voxel. I have read the manual but don't know how. A step by step tutorial would be nice. FastestVPN are working on wire guard, so I am stuck with openVPN but am unsure if they have TUN client. OpenVPN client. Thanks for you...

Anyone here has the custom firmware that LTE fix uses in the Cudy lt500?

Hello, I have bought a 4g Booster which is more like a 4g yagi antenna that is outside and that brings me 4g lte band 13 (Verizon) inside the home via a box the receives power inside and that has a panel antenna attached to it.. works pretty well but it is not pretty as I run the cable from outside ...

I have bought that same router (open box like you) for about $60. It seems to have slight issue though with the modem not seating well as I have had the no sim found message. removing the modem and reinserting it solved the issue so far. I had to flash it with goldenorb and follow the directions on ...

Thanks! Which firmware should I flash? I have seen so many, I am getting lost. Thanks for providing me with a link.
Cheers

Does this work on a WE826-T2?

Hello, before I try the above, will this work with a WE826-T2 with a quectel ec25-af (deep orange modem, also sold under other brands like Wifly and others on amazon)? Thanks!

Hello, I bought a router that is w826-T2 with a Quectel EC25. I have to admit that is is unlike all modems I bought in the past. I am trying to make it work with visible. When I get to the 3g/4g tab, I selected 4g preferred, dialing mode not sure (options are PPP, Gobbler, Usb_Dhcp , Qmi), country a...

Hello all, I bought a Tuoshi/dionlink 4g router which, once the firmware is updated open a lot of possibilities including ttl mod, band lock and more. I had it configured with visible/Verizon mvno and all was fine as I was not getting throttled and i could plug in several devices. All sites I access...

This isn't my image. I just linked it for you ;) Are you using the firmware recovery method or the GLinet UI to load the firmware? They are updated here: http://www.aturnofthenut.com/autobuilds/ info on the rooter firmware here: ofmodemsandmen.com there should be a .pdf in the .zip file on ways to ...

Thanks. Is it possible to flash the Glinet router I have with WifiX Rooter? http://www.aturnofthenut.com/autobuilds/GL-AR150-GO2022-01-26-AB19.zip Your image does not seem to update the firmware. I am at the verification stage for about one hour and still going.... Actually, I do not think it allow...

yes, the TTL rules change if using a phone tethered to the Glinet router (usb0) vs. using a 4g lte modem like a MOFI 4500. I have the right script for TTL/HL for a phone tethered to a GLInet router and I have checked the name of my phone to tethered to the router and it is correct. As for flashing, ...

Thanks. Is it possible to flash the Glinet router I have with WifiX Rooter?

I still do not get it. Do I need to delete all the rules in the custom rules (OpenWRT, LUCI) and then paste the TTL and HL script in there, save, restart the firewall and the router and phone then test if that works? Or, do I need to append the script to the one already existing and then save, resta...

How do I turn custom TTL setting off on a GliNet router (I used GL-AR150). Thanks!

If you look at another thread I started, the TTL trick does not work for me. Looks like visible has caught up upon this during their last update prior to Xmas Just want to make sure I am being clear. Was using that TTL and the VPN at the same time. Yes. At the same time. I also pushed it to using a...

Hello, the interface for the phone is indeed usb0 and wlan0. This is using putty whilst the PC is connected to the router via wifi. Matt, I have not used a linux machine for about 5 years. Looks like I will have to root the phone and install magisk hide, use a VPN wifi and other tricks. Unless some...

If you look at another thread I started, the TTL trick does not work for me. Looks like visible has caught up upon this during their last update prior to Xmas

Best set up I have used with Visible so far is a Quectel EM12. Usually use it in a WE826 router. The lan ports on WE826 are capped at 100 Mbps. But that not an issue for me. Just worth mentioning. Mofi not going to perform like the EM12, EM12 is better. The MR1100 lacks the ability to set the TTL s...

Hello, the interface for the phone is indeed usb0 and wlan0. This is using putty whilst the PC is connected to the router via wifi.

Matt, I have not used a linux machine for about 5 years.

I had time to mess up with this again today. The phone outside showed 45-55mbps. I tried the rules as stated above by JimHelms (I really appreciate the script by the way). I tried 64, 65, 64 for wwan0 and 65 for usb0 and it is a no go. I get throttled at 5mbps. Each time, I restarted the firewall, r...

Thanks guys. I will give it a try.
What do you think about my statement related to ping 8.8.8.8 on my phone giving me a TTL of 114 (in lieu of the expected 64)?

I just pinged 8.8.8.8 on my cell phone and I get a TTL of 114... When tethered onto my Pac, pinging shows 113 (114-1). Does that mens I need to set my TTL on the GLINET router at 115?

Hello all, I have been visiting this forums and others before I decided to take the plunge and post here. I have several options which include GLiNet router with openWRT (LUCI) or mini PC running currently windows 10 Pro. Either devices can broadcast the signal using a wifi antenna (omni 25dbi). The...