Wireless Joint

I purchased a couple of cheap WE826 routers from amazon. Fired them up, set the PW, set the clock, set the APN for VZ, and it connected right away. It's using the Quectel EP06. Something is up with these routers or modems and its not looking like a simple setting or command.

I went ahead and tested that. It did not improve.

So far I've tested 2 different VZ cards and a Visible card and all have the exact same results in the log. Their has to be something else. Should I load a previous software?

I also just tested both of these SIM cards in my MOFI4500 and just changed the APN and both connected fine. I don't think its the service unless its unique to this modem.

AT+CGDCONT? AT+CGDCONT? +CGDCONT: 1,"IPV4V6","VZWINTERNET","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0 +CGDCONT: 3,"IPV4V6","vzwinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0 AT+QMBNCFG="List" AT+QMBNCFG="List" +QMBNC...

Ok, So I went ahead and finished the instructions: +CGDCONT: 1,"IPV4V6","VZWINTERNET","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0 +CGDCONT: 3,"IPV4V6","vzwinternet","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0 and still getting the same Mon Jan ...

Thanks for your help on this. I've followed your exact instructions using my VZ sim card. This is one that works well on a phone and I assume its easier than Visible. I ONLY touched router setting you called out and NOT the Modem settings yet as I believe you said to wait until its connected for tha...

Thanks for the quick reply. Went through all that and still has the same issues in the system log. What I restarted it is did change the APN's: +CGDCONT: 1,"IPV4V6","VSBLINTERNET","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0 +CGDCONT: 2,"IPV4V6","vsblinterne...

Update: Its doing the same thing on my main phone SIM (VZ). Is this the modem?

Been playing with this for a couple days. I'm trying to get two NEXQ6GO / EM12 units to connect to Visible. I have a WG3526/EM160 that runs the SIM and same settings, including VSBLINTERNET APN without an issue. In MBIM I get this: Sat Jan 22 13:29:54 2022 user.notice MBIM Connect: Query radio state...

Hey All... I've actually search this form for this and was really surprised nothing solid came up. I'm assuming I'm just missing it but can someone point me to a VPN setup post or How-To? I found a bunch on youtube but all are on different kernals and they don't work. I have NORD and the cert & ...

Thanks for the replies. To answer your questions, its all the time. Fast.com shows the best upload at maybe 1mbps but its consistent across all the tests regardless of signal, bands, location etc. Digging deeper I've found that using a VPN on my computer and phone (I have NORD) allows all the speed ...

Are you using a booster? VPN? Tell us more about The computer or streaming device you’re using What band are you on? What’s a signal strength? Have you tried turning the Wi-Fi off and using a cable? Will Simplify troubleshooting sounds like a software issue No Booster or VPN. Just using my phone an...

I have a Visible / WG3526 / EM160 setup. I've taken it on some road trips and i have VERY consistently terrible upload speed tests. Like .01-.03 up. Meanwhile, I've gotten mind-blowing 90-140 download speeds at times. I've tried playing with the TTL but 64 and 65 seem to be the same. Is there someth...

Yes it was in MBIM Mode. I was able to get it online finally by adding the APN (VSBLINTERNET) to both settings, the connection profile and to the modem interface. Not sure if i was supposed to do that from the beginning but that worked. Also the TTL for Visible was 64 not 65, so I'm up and running f...

Its showing the
Modem IMEI :
SIM IMSI :
SIM ICCID :

but not the sim phone number or any signal strength or cell information. I'm using Visible.

I've just received my WG3529-P and installed the EM160. I installed the SIM in the router slot NOT the M.2 adapter slot. How can I tell if the SIM is even getting read? The router is reading the modem but says Connecting. The status also doesn't show and reception or Provider. Any thoughts to first ...