Wireless Joint

I can confirm wifi is working on my Beryl MT1300 with GoldenOrb 2022-10-26 (openwrt 19.07.7)

Have you tried locking the modem to Bells bands? Seems like using APNs may be too
complicated due to the roaming.

Should be pretty easy, if you're happy with the network set-up "as-is". Just disconnect the KuWfi from your network, plug an ethernet cable from your computer directly to a LAN port on the KuWfi, log into the GUI and make your changes. Then re-install the KuWfi back into the network. Good ...

@carp4 I've asked that same question & never gotten an answer, maybe someday?
I use 64 for both TTL & HL when using a modem and TTL & HL of 65 when tethering.
I'm using Visible as my IP (I believe they're IPV6) and it works for me. DDK

Mention of Debian linux made my eyes glaze over. But, yeah no signal seems strange. Only things that come to my
simple mind is rp-sma to sma mismatch or modem in low power mode?

Good luck, DDK

brcisna I've experienced the same thing, just happens randomly. You can tell it's the ISP by watching a speed test. Seems to last about a day, then rights itself with no action on my part. I usually ignore it (5mbps is still better than my 3mbps dsl), but if I recall, last time it happened I unplugg...

The antennas you linked to are RP-SMA, they don't have the center pin needed to make a connection to the
SMA connectors on most modem adapters. So, double check what you need for the enclosure.

DDK

Good luck...and I'd be very interested in what steps are necessary to re-brand that Dell modem. ddk

To experiment on the cheap & give yourself the best chance of success I'd recommend a Gl.inet Mango travel router, about $30. You can load ROOter(GO) on it if you want. It's only 2in. square, so it easily fits in a box mounted as close to your antennas as possible. Power it over ethernet, a powe...

If you're using Visible and you have the Visible App on your phone, it probably doesn't matter what TTL/HL you use, the app is probably tattling on you. Also, I have found that they're looking at your activity on the network, a few days ago I was getting a 85mbps dl speed(tested that morning), I the...

I was wondering if anyone else was getting a 5mbps throttle. I've not made any changes since I first noticed this, it seems to last for a day then reverts back to normal 75>90mbps speed. It only happens occasionally. When it happens it seems to be an obvious throttling, as the speed test download ju...

Wish I could help, but I know nothing about modem manager or Debian.

DDK

Don't mind at all. However at my age all the details of what I did several months ago are fading. Let me start by saying, I only use Dell branded EM7455 modems bought on e-bay for $30 or less, these modems have been removed from Dell laptops. If I recall correctly I didn't have to flash the modem fi...

Strange, I'm not having any problems on Visible. I've set my TTL & HL(hop limit) to 64 (same as an android phone) & I've never had to change it. If you're only setting TTL (in the router GUI) it may be a problem, TTL settings are for IPV4, HL settings are for IPV6. Visible seems to use IPV6....

Actually I probably get double the speed thru the EM7455 as my Samsung S8 phone. The modem, adapters & router are outdoors on a mast 7' below a X-pol, mimo panel antenna. So it receives a far stronger signal. To be clear, the only thing I do to get those speeds is using TTL/HL values of 65. Now,...

No IMEI tomfoolery required.

DDK

Who knows? I'm no Guru, hell I didn't even sleep at that famous hotel. As I understand it, Android uses a native TTL of 64 as does Linux & Apple & Mac, Windows uses 128. So, if an ISP is using TTL to identify a device as a phone they'd be looking for 64. The Android native tethering app decr...

Yes.

Simple answer is yes. I've done this with three of the Dell EM7455s. I used the DW5811e/3P10Y versions. They also were id'd as EM7455/1102424. IIRC, these modems were listed on Zukota's site as being the most likely to be convertible, others may be more problematic. Two of the three were converted t...

Glad to see someone ask that. I'm using visible, I set my modem TTL to 64 for both IPV4 & IPV6 and
I see 85-87mbps dn & 17-20mbps up. I use a second set of TTL rules for tethering, those are set to
65 for both IPV4/IPV6, the only thing limited is video streaming since I don't use a VPN.

DDK