Wireless Joint

Can anyone tell me if they have been able to obtain an IPV6 address on AT&T that is public and can accept inbound connections? I recall trying this a year ago with phone plan but all inbound traffic appeared to be blocked, almost like the IPV6 address was proxied. I believe I was using the NXTGE...

Is this still an issue for everyone using an EM-12G with AT&T? I’ve recently tried with software release 21 and I’m still experiencing the same issue with CA dropping out and not coming back. Any modems or release that CA works correctly on AT&T?

Can the sim be moved to a different device?

Might want to try loading up in the car, use a portable inverter or similar power source, or take it to another house/work, and test it on another tower. Ensure you have top signal. Also may want to drive right up to your tower with your rig and see if it changes. Testing if its signal strength iss...

nedyah70 wrote: ↑Fri Feb 07, 2020 10:49 pm I am having the same issue. Both with an EM12 and EM20. Connects, CA holds for awhile, drops and never recovers unless I reboot.

What does your signal look like?

I am having the same issue. Both with an EM12 and EM20. Connects, CA holds for awhile, drops and never recovers unless I reboot. Interesting... So far with all the research and testing I've done, it appears to be something AT&T is doing, perhaps as part of traffic management. I have no issues w...

I'm running the EM12 on a Raspberry Pi with latest ROOter software. It was plug and play. Have been experiencing a few issues with carrier aggregation but believe this is all due to the provider. Firmware upgrade was easy and support from Quectel has been very good.

Thanks for the reply. I've been testing via large data pulls 1G+, CA still won't kick in. If I reset the modem and perform the same test immediately after it enables CA and I see the increased download speed.

Greetings all, I recently purchased the EM12-G, enclosed in the USB3 enclosure, and have it connected to a Raspberry Pi. I currently have the modem locked to B2+B14, which gives me good speeds and signal. One thing I have noticed, over an extended amount of time, hours not days, it will no longer co...