Wireless Joint

I am not giving it away, it is by no means tested, your phone must be jailbroken and I can load it for you but not give the script to you, I only used it on and made it from files from an iphone X and am not sure if it will even work on other newer iphones, it may need a specific file made from the ...

You are trying to write the ipv4 ip? that gets assigned, I think the only way to do that is to hard code it via either root console or adb port, do you have it rooted, that device is a pain to root.
I think if you did hard code it it would/may get re-assigned upon service and/or may keep you from ...

Check the apn and try to change the imei it may be blacklisted. if that does not work demsg it and look thru the logs your answer may be there.

You can use my firmware to load on it, it has comports already enabled including the android port which has full root access.

You will need flexihub on a windows pc to make remote work possible, so pls dl and install it then make sure to restart your pc or the driver won't work.
No need to register an account for it as I will send you a token to login with.
We will need somewhere to chat so I can instruct you.

@rich ...

if you can get your edits to stick, editing this file will only end in breaking service and in device hang on netgear logo
ca bitmask.PNG

This file is backed up in more than one place, netgear is now making backups for the backups and if you edit this then you would need to add the proper bitmask ...

I will enable your ports for you so you can play with it if you wish.

I laugh at me sometimes to

I tried to join that group a few years ago and they denied me, some people get mad that I do this for a living and don't just give it all away but that don't put food on the table

here it is in NVBF in the efs, however editing ASCII here wont respect your changes as this file is backed up not only in the rfs it is in the userrw, ntgrpersist and cust parts as well as /safe and sfs and swir in the efs, to properly edit it it should be done by the root/admin user via DM command ...

That is an AT command not a DM command, DM commands are Alphanumeric similar to binary just not limited to zero's and one's.
DM's are an old system made back in the beginning of wireless mostly for cdma or at least here in the states where cdma was prevalent in the beginning of wireless, however ...

I Change either of them in the nv by DM command via the diagnostic comport, there may be a cli for it I cannot remember if there is or not you can check for it.

How did you manage to do that, I just saw those on ebay for about 10 bucks, prob less hassle for you to get another one.

Yes 2 mac-id's, yes they can be changed

Yes pls use this link, or email or telegram
viewtopic.php?p=29660#p29660

why don't you dmesg it and try to find out what is going on before you go and do something you may regret like try to load it cross platform?
I can't tell you how many devices I have recovered for people that did just that and ended up with a paperweight, You may get along just fine doing it but you ...

I am in the middle of the woods in Kansas (Oskaloosa) it was not that rocket, whatever it was it came down fast and I could see no flames or anything like that just that long white smoky looking tail. I would think it would have left a big crater in the ground and someone would have reported about ...

This was a couple months ago in last winter time, I happen to look up and see this object or metor or space junk or ufo or?
It looked to be pretty big and coming straight down I never heard anything about it on the local news in the coming days, I thought it would be kind of cool to post it and see ...

debrand/rebrand MR7400
All of these startup and shutdown logos can be modified
In this video I used the spots where the at&t logo and the spinner logo were.

https://youtube.com/shorts/VZepEYvbbU8?feature=share

it already is, I added it to sierrakeygen and posted it in this thread if you need it

I worked with a friend a little on one of these mine is on 10.03.22.01, his was a lessor version and his would not run my
fastboot firmware nor would it boot after we loaded it but my spk loaded and recovered it and is ok now.
I am guessing it is fused and cannot decrement the firmware but only ...

There is no leaked loader for this chip yet

Yes that is the screen now use fdt and reload it with the proper spk or cwe

Yes the one on the top, power/home sorry for confusion I forgot that one has a home touch part also.

battery out and unplugged, from there hold the home button and do not let go of it now pop the batt in and keep holding home for 10 seconds or so or until you see "downloading" on the screen, if it wont go there then you will have to hope that one of the secure parts are not borked so it can be ...

Hi my contact info is on the contact us page over at www.mifis.us

For fastboot on netgear remove the battery and cable then hold the reset button on the back and slide the battery in first and continue to hold reset in and plug the cable in then keep holding reset until your pc dings, about 5 seconds or so.
If it will go to FB I can prob recover it for you, if not ...

No fastboot mode by the reset button?

Please stop the emails and messaging about this, here is the file I modified it with AKOSTERIN's commit it is temporary and does not have SDX65, I only added SDX75 to it to test with it so you should go to bkerlers git page and get the complete file
once edited by him.
I put that in the comments in ...

AKosterin wrote: Sun Mar 16, 2025 5:03 pm my pull request to sierra keygen with !OPENLOCK and !OPENCND keys

security challenge working with your commit-good deal-

openmepworking.PNG

Codes for this cannot be calc yet but security can be bypassed and openmep can be enabled

will be nice to have keygen working to

putty.PNG

OK update since yesterday I have now got then imei written (hard code only)
Now need to make some de-throttle files for it, it runs about 220mbps on tmobile here without dethrottle so
lets de-throttle it and see what it can do.
here is a vid showing the gal s22 imei I put on it and it running on ...

No sorry, I stopped working on that as I do not have a MR6xxx device anymore to continue the work, and to downgrade the only safe way to load across platforms is by custom file loaded via fastboot to the non secure parts only. trying to load the secure parts will only end in brick.

I got a couple of these a few days ago, they are nice but have some updated securities so it is a work in progress.
Please add to this thread anything you find about it.
I was able to make up an spk loaded thru fdt and also make some custom firmware for it to be loaded thru fastboot.
it has a 40 ...

Rich, were you able to put together a 12.x firmware with openmep?

I have same question?? I need use it with full speed

Yes I have a custom 12.xx firm made up that has everything working, openmep, openlock, telnet imei zerod out etc.
but I have said many times there is no need to downgrade ...

Sure np, I hope you backed up sbl before you deleted it.

Ok here it is I circled it red for you, or for 9008 via fastboot use fastboot erase sbl

testpoint t9-R717.jpg

I enabled the ports then just erased sbl and it will be stuck in 9008 mode but fair warning if you do that you will need to
reload at least the sbl after sending a proper loader to it or it will never come out of 9008 mode and boot back up.
Or there is a testpoint for this one, one that goes to ...

You should prob start your own thread, you might be needing 2 of them, one for how to recover it if you keep trying to load off platform firmware to your device, this is very risky especially if you are doing it repetitively.

With what?

No it is not down, it is under construction and I only except pre arranged calls, or else text only on my skype. the answer to your question is in the forum, it gets asked about 20 times a day and I cannot keep answering the same redundant question over and over and over.

edit-- by homepage if you ...

yes it is fine

Its not password protected, this site requires you to be logged in to dl or it asks you to login before you can dl things.

In this case you need to reload the system of course which means you will need system.ubi file to do it and load it the same way via fastboot.

Ok, I assume you only want the root file system, this is a 3 volume file containing, cache, usr and root filesystems, here is the rootfs part.
If you take it please hit the thank you button

rfs.PNG

T10_rootfs.zip

It should be open on that one

use one of the internal tools to pull them, I do not have this devices firmware on this pc it is to old so it is on a ext storage drive so I cant tell you which one to use but possibly system control module or I am sure it has an sms module if it does not
then the webui will have one, these devices ...

Update:
So I worked with this device some more over the last few days and can say t9 firmware does work fine and acts basically like any other t9 device, it gets service and as my build has all the hidden menus enabled and is pre-unlocked with the imei zerod out this all reflects on the t10 when the ...

No and I dont know I have not worked with the m7 yet

put it in download mode and reload it, if it will not go into dl mode you will have to load it from fastboot mode.

Hi Rich,

Looking for this as well. I need IMEI and TTL Spoofing for hotspot bypassing.

Please let me know if thats okay.

email me about it
kcphonestores@gmail.com

Hey Guys... I have an X Pro that is now restarting in a loop , because executed the wrong fastboot command. Can someone guide ...

Give some info about your setup would prob help

hi, rich im inquiring about your services, i have a MR6110 and i need the Telnet open. Could you get back to me asap regarding this matter.

-W

The link below is the proper place for your post not hijacking jimbots thread

https ...

@ Jimbot
What have you done (mods) to the devices that supply your other devices with internet?

Give some info about your setup would prob help

It is not any of the pads, these boards on these inseego devices are all based of the m2000/m2100 board so just look on one of those.

not pads on the fg, on the qc board you have to jump the points where the reset button would be.

none of those will get you to fastboot, you have to lay the qualcomm board over to get to it.

I have no email from you
use kcphonestores@gmail.com

That is good then that you did not try to reload the firmware because it was not needed and you may have put your device
in jeopardy doing so, firmware loading should always be a last resort because it is not always successful and can leave your device borked worse than it was.

Before you go trying to load firmware to it ( which is dangerous ) don't you think you should try and find out why it is overheating?

It is mep you need to use which is locked out on your platform, there is no need to load firmware anymore to correct the now closed port and no mep functionality, it can be corrected on any device on any platform now and keeping the os intact

It is just some code written in python, I did not make any gui for it

We could talk about it but as is it will not work now it is coded for use with a cdma network like vzw used to be, now having said that we did make a hack that allowed gsm lines to be programmed to cdma devices I am not sure if it still works its been like 3 years since I have tried it, you can msg ...

I had worked on getting a legit contract from Verizon for a year, we had the details ironed out and they were going to sign in a week we were going to be partners then all the sudden they did a 180 the next week they implemented into their system to only allow 3 MDN changes per cycle and told me ...

autoverifyme worked for several years and besides my iphone tool it made more income than any tool I made, it had about a million lines of code, we used cdma phones and had about a thousand of them, the client would buy x amount of lines from us we used pageplus mostly but some vzw direct also ...

I had worked on getting a legit contract from Verizon for a year, we had the details ironed out and they were going to sign in a week we were going to be partners then all the sudden they did a 180 the next week they implemented into their system to only allow 3 MDN changes per cycle and told me to ...

I am the owner of autoverifyme.com the original sms verification service, we used real USA numbers not virtual numbers, it became to difficult to get numbers for us so we took it down. we still have the tool though. virtual numbers would never work to verify most of the services our clients needed ...

everytime i try to repair my imei the sierra card powersdown and kills my serial connection to it.
how can i stop it from powering down?

This is the modem telling you that you are not privy to change this secure item the way you are trying to change it is tripping
the security fuze thus the ...

um, I did not say that lol

why dont you post it here and let the community try it, have you checked to verify it is md5crypt?

will try that. also would you be able to provide me a full firmware dump of the T10 itself? I'm unsure about how to go about obtaining it.

Ok for this one I will.
This is a full dump of the firmware broken down to individual partitions for you with the spare and sums removed already.
If you ...

I gained my root access thru the adb port so I never needed the root pass so I never bothered to decrypt it, try frk9x07
that was it for the t9 and this one has the same chip so it may work. if it doesnt you can decrypt it by brute force use md5crypt to do it.

If you know that your device can see the 5G bands you are trying to use go into the admin page in the advanced tab and set it to 5g only

Klaus4 wrote: Sat Oct 12, 2024 4:44 am Hi how can I enable the 5G bands and is this the last firmware?

thanks

Klaus

It is enabled by default but you can turn it off/on in the admin pages

First the firmware is old and then I need Euopean bands

That firmware is good once updated they will lock you out, meaning no openmep, no telnet, no open port on 5510 and install an efuze on your device, and while version 12.xx can now be repaired for those things without the need to upgrade or ...

Yes it is correct but all emails have been answered as of right now so you must be typo'n it in the mail or something.
you can also use customersupport@mifis.us

Search found 678 matches