Search found 21 matches

by megaplow
Tue Aug 31, 2021 10:54 am
Forum: Market Place
Topic: Quectel EP06-A
Replies: 2
Views: 4439

Quectel EP06-A

I am upgrading from a cat6 to a cat12 modem. This is a Quectel EP06-A with the Wireless Joint upgraded firmware.

$50 plus shipping.
by megaplow
Mon Feb 08, 2021 9:53 am
Forum: Internet Service Providers
Topic: Visible + EC25-AF + GoldenOrb doesn't connect to LTE
Replies: 34
Views: 33759

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

Been connected for a few days now. It looks like my connection is solid. Thank you all for the help.
by megaplow
Fri Feb 05, 2021 5:26 pm
Forum: Internet Service Providers
Topic: Visible + EC25-AF + GoldenOrb doesn't connect to LTE
Replies: 34
Views: 33759

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

Thanks for the information! I was moving from PagePlus to TMobile... It looks like everything got updated. AT+QMBNCFG showed one active... AT+QMBNCFG="List" +QMBNCFG: "List",0,1,1,"ROW_Generic_3GPP_PTCRB_GCF",0x0801FE02,201910231 After the reboot AT+CGDCONT? +CGDCONT: 1...
by megaplow
Sun Jan 31, 2021 11:21 pm
Forum: Internet Service Providers
Topic: Visible + EC25-AF + GoldenOrb doesn't connect to LTE
Replies: 34
Views: 33759

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

The following command always produces an error. Probably because it is in use, is there a way to disable it? AT+CGDCONT=1 The rest of the commands work without error AT+CGDCONT=2;+CGDCONT=3;+CGDCONT=4;+CGDCONT=5;+CGDCONT=6;+CGDCONT=7;+CGDCONT=8;+CGDCONT=9;+CGDCONT=10;+CFUN=0;+CFUN=1 (set all other A...
by megaplow
Sun Jan 31, 2021 4:26 pm
Forum: Questions and Support
Topic: Looking For Tutoral On Setting Up My Quectel EM-12G Modem
Replies: 11
Views: 8822

Re: Looking For Tutoral On Setting Up My Quectel EM-12G Modem

Thanks for that
I am looking for what commands are required after a fresh start (oem state).

In the txt doc provided above, the IPV Modes section looks carrier specific.
Do I run all the commands starting with ...Set Connection Modes?
by megaplow
Sun Jan 31, 2021 4:07 pm
Forum: Questions and Support
Topic: Looking For Tutoral On Setting Up My Quectel EM-12G Modem
Replies: 11
Views: 8822

Re: Looking For Tutoral On Setting Up My Quectel EM-12G Modem

I am open to PagePlus (preferred) or SimpleMobile. I have all the router settings I need for those. What I am not sure about is what modem (at+commands) settings are needed to be addresses from a factory reset (for the Em-12g).
by megaplow
Sun Jan 31, 2021 2:30 pm
Forum: Questions and Support
Topic: Looking For Tutoral On Setting Up My Quectel EM-12G Modem
Replies: 11
Views: 8822

Re: Looking For Tutoral On Setting Up My Quectel EM-12G Modem

@kzaudio @gsheb... Were either of you able to get your EM-12Gs set up? I am moving from the EP06 to the EM-12. Currently I am able to connect but my speeds are slow. Can you share a set of at commands you used to get your devices running? I looked at the commands from the previous post, but those lo...
by megaplow
Tue Jan 19, 2021 3:27 pm
Forum: Internet Service Providers
Topic: Page Plus account details
Replies: 0
Views: 1187

Page Plus account details

Hey All,
I just activated my sim card on PagePlus. It shows I have one payment history and no phone. That said, my phone is able to make calls and connect to cellular. Is that correct? What should the dashboard pages look like of my PP account?
by megaplow
Tue Jan 19, 2021 11:42 am
Forum: Misc Modem Cards and Dongles
Topic: NEXR5GO EM12 about to be in my lake
Replies: 31
Views: 11278

Re: NEXR5GO EM12 about to be in my lake

Great writeup...

The following command always returns an error on the EM12. The rest of the contexts are fine, but #1 always returns an error.
AT+CGDCONT=1

Were any of you able to run this command?
by megaplow
Wed Jan 13, 2021 10:37 pm
Forum: Misc Modem Cards and Dongles
Topic: EP06 vs EM12 AT+Command mapping
Replies: 2
Views: 3108

Re: EP06 vs EM12 AT+Command mapping

@didneywhorl
Thank you very much, the additional doc adds clarity. I think I have enough understanding to start issuing AT commands... fingers crossed I have a working modem on the other side.
by megaplow
Wed Jan 13, 2021 6:28 pm
Forum: Internet Service Providers
Topic: IMEI for my modem
Replies: 6
Views: 3020

Re: IMEI for my modem

Would you look at that, there it is... Thank you.
by megaplow
Wed Jan 13, 2021 4:43 pm
Forum: Internet Service Providers
Topic: IMEI for my modem
Replies: 6
Views: 3020

Re: IMEI for my modem

I am looking at Page Plus (verizon).
I have an iPhone 6s that is willing to donate its IMEI and MAC address if needed.
by megaplow
Wed Jan 13, 2021 4:18 pm
Forum: Internet Service Providers
Topic: IMEI for my modem
Replies: 6
Views: 3020

IMEI for my modem

When I set out to get a cellular router up and running, I had no idea what I was getting into. Now I am getting clarity on the process and the rabbit hole keeps going (and going and going). Today an new detail reared its ugly head. The issue of the IMEI number. I thought the IMEI came with the SIM c...
by megaplow
Wed Jan 13, 2021 12:55 pm
Forum: Internet Service Providers
Topic: Visible + EC25-AF + GoldenOrb doesn't connect to LTE
Replies: 34
Views: 33759

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

@Didneywhorl
Thank you for the tip. The other post makes sense. To be clear, in order to get the "Deactivate" command to work, we need to set it, then toggle QMI to MBIM then back to QMI? With lots of modem reboots in between all the commands?
by megaplow
Wed Jan 13, 2021 12:36 pm
Forum: Misc Modem Cards and Dongles
Topic: EP06 vs EM12 AT+Command mapping
Replies: 2
Views: 3108

EP06 vs EM12 AT+Command mapping

Hey All, I have a EP06 setup and am trying to get a EM12g working. Looking at the EP06 AT commands and the Quectel manual ( https://www.quectel.com/UploadImage/Downlad/Quectel_EM12&EG12&EG18_AT_Commands_Manual_V1.0.pdf ), some commands are not found :| . Specifically the commands below. AT+Q...
by megaplow
Tue Jan 12, 2021 11:31 pm
Forum: Internet Service Providers
Topic: Visible + EC25-AF + GoldenOrb doesn't connect to LTE
Replies: 34
Views: 33759

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

Does anyone have the EM12g working?
Can you share a list of the required AT commands?
by megaplow
Tue Jan 12, 2021 12:09 pm
Forum: Tutorials
Topic: Quectel - Programming Carrier Bands and Groups of Bands
Replies: 28
Views: 70524

Re: Quectel - Programming Carrier Bands and Groups of Bands

@BillA, Thanks for the info! You mentioned auto-scan, that seems a lot easier than using the specific band commands. The spreadsheet came up with the following commands: Band 2 = AT+QCFG="band",0,2 Band 4 = AT+QCFG="band",0,8 Band 5 = AT+QCFG="band",0,10 Band 13 = AT+QC...
by megaplow
Mon Jan 11, 2021 12:04 pm
Forum: Tutorials
Topic: Quectel - Programming Carrier Bands and Groups of Bands
Replies: 28
Views: 70524

Re: Quectel - Programming Carrier Bands and Groups of Bands

Is there a list of all the AT commands needed to set up the EM12g? I am looking to set up a EM12 on PagePlus. I looked at the spreadsheet posted above and decided quickly that I was in over my head. I do not want to brick the modem. Aside from the full list of commands, which bands are required for ...
by megaplow
Fri Dec 04, 2020 12:05 pm
Forum: Internet Service Providers
Topic: Final Step
Replies: 2
Views: 1666

Re: Final Step

Thanks for the info!
I will check out those options. I went with the NEXR5GO router and an EP06 modem.
by megaplow
Wed Nov 25, 2020 10:36 pm
Forum: Internet Service Providers
Topic: Final Step
Replies: 2
Views: 1666

Final Step

Hey All, It has been a long road but I finally have my router installed in the van and am ready to get a service plan. I was planning on Verizon, but the threads in here about the 5mbps limits on Verizon have me a little worried. I have a Verizon and an ATT sim. Can you please suggest one carrier be...
by megaplow
Thu Sep 24, 2020 2:05 pm
Forum: Firmware
Topic: Editing packets with OpenWrt
Replies: 3
Views: 3237

Editing packets with OpenWrt

Is it possible to edit the outbound packet data going through a router running OpenWrt? My router is in the mail and I am coming up to speed on all this.

Go to advanced search