Search found 378 matches

by Adm1jtg
Thu Jan 06, 2022 5:39 pm
Forum: Questions and Support
Topic: Affordable Low-loss Coax cable type for outdoor antenna!
Replies: 11
Views: 151

Re: Affordable Low-loss Coax cable type for outdoor antenna!

I use three of those wilson antennas (2 for data in mimo and one for phone on a booster system). I have them all connected with lmr400 wilson cable. I really dont think you could do better and saving a few pennies on cabling just isnt worth it. With cheaper cabling even at 25' you could lose almost ...
by Adm1jtg
Fri Dec 10, 2021 8:54 pm
Forum: General and Unclassified
Topic: Need Mentor/Tutor. Overwhelmed by OpenWRT/ROOter. No modem yet, just preparing. pls help
Replies: 4
Views: 922

Re: Need Mentor/Tutor. Overwhelmed by OpenWRT/ROOter. No modem yet, just preparing. pls help

Well i have not seen any in here that have successfully setup a load balanced failover setup between 2 carriers. I am sure its possible but it is at least way above my pay grade. Most in here need help with carrier related issues, aiming antennas, configuring the basic router for a single carrier an...
by Adm1jtg
Thu Dec 09, 2021 12:57 pm
Forum: WiFiX Routers
Topic: WiFix WG3526/EP06/visible smart tv’s won’t work
Replies: 4
Views: 854

Re: WiFix WG3526/EP06/visible smart tv’s won’t work

May not help at all but my initial thoughts on reading this was change your DNS on the main router and usually there is a setting to force all devices use that DNS.

I would test with 1.1.1.1
or
8.8.8.8

Hopefully its that simple.
by Adm1jtg
Sat Dec 04, 2021 1:16 pm
Forum: General and Unclassified
Topic: Need Mentor/Tutor. Overwhelmed by OpenWRT/ROOter. No modem yet, just preparing. pls help
Replies: 4
Views: 922

Re: Need Mentor/Tutor. Overwhelmed by OpenWRT/ROOter. No modem yet, just preparing. pls help

Not sure you will find any ONE specific person here to just do it all for you or mentor you step by step per say. What you will find here is people who are very willing to help with SPECIFIC questions. There are MANY different moving parts in what you describe and a few missing parts as well. Honest...
by Adm1jtg
Tue Nov 23, 2021 7:07 pm
Forum: Questions and Support
Topic: Cable Extension Question
Replies: 8
Views: 1189

Re: Cable Extension Question

I can remember back when I was testing antenna location putting the antenna on top of a pole on top of a bucket on top of a ladder and moving the router to areas that made no sense at all but the idea is test with what you got in anyway you can and IF you determine that the new setup REALLY is SIGNI...
by Adm1jtg
Tue Nov 23, 2021 10:03 am
Forum: WiFiX Routers
Topic: WG1608: Should I upgrade FW from 18.06 GO2020-06-10 ?
Replies: 3
Views: 503

Re: WG1608: Should I upgrade FW from 18.06 GO2020-06-10 ?

If it aint broke dont fix it :)
by Adm1jtg
Mon Nov 22, 2021 11:20 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

going from memory i think i used the router reboot option, may have been modem reset, try modem reset first as it takes less time for the router to recover. I used the google DNS server as the tracking ip 8.8.8.8 I would set ping count to 3 or change interface down to 1 and i think i set ping interv...
by Adm1jtg
Mon Nov 22, 2021 7:40 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Well here is the basics of it:
https://ofmodemsandmen.com/modemconfig2.html

but you really need to talk to someone smarter then me to enable and configure it as when I changed carriers to verizon years ago I no longer needed to use it.
*knock on wood*
by Adm1jtg
Mon Nov 22, 2021 7:32 pm
Forum: Questions and Support
Topic: Cable Extension Question
Replies: 8
Views: 1189

Re: Cable Extension Question

This may sound stupid, but if you need to move the antennas 10 feet farther away from the router is it possible to relocate the router 10 feet closer to the new antenna placement? Maybe put it in an attic? Move the router to an externally closer spot? I had an issue like yours and ended up cheating ...
by Adm1jtg
Mon Nov 22, 2021 7:20 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Guess I am missing something.... what does the router rebooter do that connection monitor, a built in part of the goldenorb, doesnt?
by Adm1jtg
Wed Nov 03, 2021 1:07 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

There used to be something called connection monitor in the routers firmware. It would poll the internet connection every x number of minutes and if it didnt get a reply would reset the connection. Not sure if this is still in newer versions but on mine its under connection profile and on a tab call...
by Adm1jtg
Wed Nov 03, 2021 9:51 am
Forum: Quectel Modems
Topic: EPO6-A vs EM-7455 Modems
Replies: 4
Views: 122

Re: EPO6-A vs EM-7455 Modems

ep06-a the connectors are larger and you wont need a pcie adaptor.

+1 as well for quectel being easier to work with
by Adm1jtg
Sat Oct 23, 2021 10:36 pm
Forum: Quectel Modems
Topic: EP06-A firmware
Replies: 11
Views: 153

Re: EP06-A firmware

Looks almost the same

ati
Quectel
EP06
Revision: EP06ALAR02A08M4G

AT+QGMR
EP06ALAR02A08M4G

was just curious so ran both
by Adm1jtg
Thu Oct 21, 2021 2:30 pm
Forum: Quectel Modems
Topic: EP06-A firmware
Replies: 11
Views: 153

Re: EP06-A firmware

looks like the command to check firmware version is
ati
will respond with something like this

Quectel
EP06
Revision: EP06ALAR02A08M4G

thats from my modem that works fine on visable and is over a year old

mine is an EP06-A
by Adm1jtg
Wed Oct 13, 2021 12:21 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

from a different thread but they had simular issues
Have you tried resetting the modem?

Should be AT+QPRTPARA=3 then after it reboots AT+QPRTPARA=1
by Adm1jtg
Wed Oct 13, 2021 10:48 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Ok then the factory reset isnt happening. Not at all sure why
by Adm1jtg
Wed Oct 13, 2021 10:18 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Send a message to The Wireless Haven tech support then, maybe the reset doesnt go to chinese on their units but I thought it did. Aftert you do the process and you get the wifix login.... does your unit reset to defaults or does it "remember" all your settings? It sounds like its NOT facto...
by Adm1jtg
Wed Oct 13, 2021 9:38 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

I cant explain it either, and apparently no one else wants to chime in. I am betting most would say to reflash the firmware, many would say 3 times :). I am recommending the full factory reset as that eliminates all previous remnants of goldenorb/wifix. That said the one issue with flashing the vers...
by Adm1jtg
Tue Oct 12, 2021 10:01 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Saw another post with symptoms like yours

https://wirelessjoint.com/viewtopic.php?f=15&t=3108

that makes at least 3 i know of
by Adm1jtg
Tue Oct 12, 2021 9:55 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

This is just my PERSONAL recommendation based SOLELY on my own expierences but When I loaded the latest firmware version I had signal issues. Now that could have been a ton of different things but when I went back to my old version all the issues went away and things got rock solid stable again. Wit...
by Adm1jtg
Tue Oct 12, 2021 9:03 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

How are you determining there is no internet? I ask because recently we had a posting in here saying the same thing and it turned out that he did have internet but it was being throttled so badly that nothing would load. He determined this by putting the sim back in his phone and somehow tested and ...
by Adm1jtg
Mon Oct 11, 2021 10:38 pm
Forum: Cellular Antennas
Topic: Single or 2 15dbi mimo antennas is there a difference?
Replies: 22
Views: 3151

Re: Single or 2 15dbi mimo antennas is there a difference?

ok yeah i think i remember this now from earlier in this thread. Since you already have a 75 ohm booster and its working I would do like I have in my home and have 2 seperate systems. A booster for phone use (use your 75 ohm booster system) A router for internet, in my case a wg3526 with an EP06-A I...
by Adm1jtg
Mon Oct 11, 2021 10:16 pm
Forum: Cellular Antennas
Topic: Single or 2 15dbi mimo antennas is there a difference?
Replies: 22
Views: 3151

Re: Single or 2 15dbi mimo antennas is there a difference?

Well I can only speak on verizon 4g but in my case the strongest signal is 13, the signal my router would pick by default is 5 and the best band for actual use is 66. My situtation is heavy trees, mountains and a the closest line of site tower is over 6 iles away. 66 is still best but the only way t...
by Adm1jtg
Mon Oct 11, 2021 9:25 pm
Forum: Cellular Antennas
Topic: Single or 2 15dbi mimo antennas is there a difference?
Replies: 22
Views: 3151

Re: Single or 2 15dbi mimo antennas is there a difference?

You mean like one of these: https://www.weboost.com/products/314411 I started with one of these and then purchased a second one to run in mimo config. They are SLIGHTLY worse then the The Wireless Haven ones, at least on paper, but also can be found for about $50 each. Would be curious what @mtl2663...
by Adm1jtg
Mon Oct 11, 2021 8:32 pm
Forum: Modems - Questions and Support
Topic: Slow Speeds on RM502Q-AE
Replies: 21
Views: 1993

Re: Slow Speeds on RM502Q-AE

In the rooter/wifix firmware there is bandwidth monitor that might help you monitor your usage. It seems to start at the first of every month but you might be able to tweak that somehow. Its found under services/bandwidth monitoring There s also an addin called lede traffic usage monitor that also m...
by Adm1jtg
Mon Oct 11, 2021 8:27 pm
Forum: Cellular Antennas
Topic: Single or 2 15dbi mimo antennas is there a difference?
Replies: 22
Views: 3151

Re: Single or 2 15dbi mimo antennas is there a difference?

Just be carful when you read something that says 15db or whatever rating as on a multiband antnna the db rating is usually for the highest frequency of the antenna. Using the model above as an example its ONLY 15db gain at 2700mhz at something more in the LTE spectrum like 2100 (band 4,66) its about...
by Adm1jtg
Mon Oct 11, 2021 12:13 pm
Forum: General and Unclassified
Topic: Archer A7 Router and EM7455
Replies: 51
Views: 5110

Re: Archer A7 Router and EM7455

When setting up things or troubleshooting its always best to use ethernet. That said I have always just setup the wifi over ethernet so am not sure what the default password would be. Try 12345678
by Adm1jtg
Mon Oct 11, 2021 10:44 am
Forum: General and Unclassified
Topic: Archer A7 Router and EM7455
Replies: 51
Views: 5110

Re: Archer A7 Router and EM7455

When I had a situtation like yours (wouldnt accept AT commands) in rooter/wifix firmware I ended up having to buy a usb adaptor and "programming" the modem with AT commands from my windows laptop. After I did that it worked properly.
by Adm1jtg
Fri Oct 08, 2021 9:59 pm
Forum: Modems - Questions and Support
Topic: Slow Speeds on RM502Q-AE
Replies: 21
Views: 1993

Re: Slow Speeds on RM502Q-AE

All I can think of is the phones have a higher cat level then your cat 20 modem (very unlikely) or perhaps the phones are 4x4 antennas where as your modem setup isnt (also unlikely)

Kinda stumped as well

BTW I HATE you my system get 20 meg down on the best days :D
by Adm1jtg
Fri Oct 08, 2021 9:15 pm
Forum: General and Unclassified
Topic: Archer A7 Router and EM7455
Replies: 51
Views: 5110

Re: Archer A7 Router and EM7455

Thats a dell branded version. Not sure if they use a custom firmware or not someone in here thats smarter then me might know. I found this about it but this is well above my "pay level". Hopefully as I said earlier someone else who is smarter then me in here can help. If I am reading it ri...
by Adm1jtg
Fri Oct 08, 2021 9:08 am
Forum: General and Unclassified
Topic: Archer A7 Router and EM7455
Replies: 51
Views: 5110

Re: Archer A7 Router and EM7455

I guess this is not a Sierra EM7455. It must be some kind of generic knockoff. Never even been used. Is this going to cause me problems? I guess try it like it is and see what happens? Take a picture of the label on it or type in anything you see as a model# as the AT commands can be different for ...
by Adm1jtg
Thu Oct 07, 2021 7:58 pm
Forum: Technology
Topic: Is the future wireless or more fiber?
Replies: 10
Views: 2107

Re: Is the future wireless or more fiber?

in my area dsl isnt even an option. so no cable option at all.telco lines are 20+ years old and dsl has been "full" for over 7 years. Satellite is completely oversaturated both viasat and hughesnet cant even get 1 meg down. Cell access is so bad cant even make a reliable call without a boo...
by Adm1jtg
Thu Oct 07, 2021 10:49 am
Forum: Modems - Questions and Support
Topic: Slow Speeds on RM502Q-AE
Replies: 21
Views: 1993

Re: Slow Speeds on RM502Q-AE

Its not just about being de-prioritized it is also about server utilization. Sounds like at 1am there is low utilization and when you last tested there were many more people utilizing the server. Also I have found different bands not only work faster and slower but also some are less utilized then o...
by Adm1jtg
Wed Oct 06, 2021 3:24 pm
Forum: Cellular Antennas
Topic: Improve atenna signal.
Replies: 11
Views: 2049

Re: Improve atenna signal.

rofl "project shrek" is getting better results then I am with dual mimo external antennas and over a year of tweaking.

:(
by Adm1jtg
Wed Oct 06, 2021 10:00 am
Forum: Cellular Antennas
Topic: Improve atenna signal.
Replies: 11
Views: 2049

Re: Improve atenna signal.

You can spend a lot of money and likely do no better and perhaps not as good then your Comcast setup. I got into cellular internet because there was only Dialup and sat internet available to me where I live. If cable Internet was available I would never have gone through all the other hoops. If you...
by Adm1jtg
Wed Oct 06, 2021 9:50 am
Forum: Cellular Antennas
Topic: RG6 cabling verus RG58
Replies: 7
Views: 1366

Re: RG6 cabling verus RG58

The main issue is that rg6 and rg58 have huge signal loss compared to lmr400. In a worst case scenerio based on the linked calculator @100 foot cable length: https://www.qsl.net/co8tw/Coax_Calculator.htm lmr400 @ a frequency of 2100 which is band4/66 frequency for downloads you would lose about 6db ...
by Adm1jtg
Tue Oct 05, 2021 9:05 am
Forum: General and Unclassified
Topic: Router Choice
Replies: 17
Views: 2078

Re: Router Choice

dbshelton wrote: Tue Oct 05, 2021 5:17 am Good point. Now I am using an Archer AX21 router as an access point and the Wifi is much better than the NEX.
I use a low end archer c8 and its also much better. Router cost me like $40
by Adm1jtg
Tue Oct 05, 2021 9:04 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

lol cant help you there only streaming I do is netflix and amazon to watch movies
by Adm1jtg
Mon Oct 04, 2021 9:19 pm
Forum: General and Unclassified
Topic: Router Choice
Replies: 17
Views: 2078

Re: Router Choice

I am really just asking out of curiosity for information. Could another NEX5RGO be used as an access point for my current NEXR5GO then it could be put into service as the main router if needed? You could but honestly on most of the routers the wifi is subpar to using even a generic home router as a...
by Adm1jtg
Mon Oct 04, 2021 9:16 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Well I cheat... I have my media pc wired difrectly into my router via ethernet and plug it into the main tv via cdmi. That way if I need to access the router via ethernet i just grab a keyboard and mouse. Its also on tightvnc so I can remotely takeove the pc if needed as well. But honestly I rarely ...
by Adm1jtg
Mon Oct 04, 2021 4:18 pm
Forum: General and Unclassified
Topic: Router Recommendation to hide Tethering from AT&T
Replies: 5
Views: 548

Re: Router Recommendation to hide Tethering from AT&T

All of your above research is correct, though we do not talk details about changing imei in here as TECHNICALLY its illegal to be doing that. From my limited knowledge you will need to reseach the exact At command on your own but the quectel modems are the easiest to do this on while the sierra mode...
by Adm1jtg
Mon Oct 04, 2021 9:36 am
Forum: General and Unclassified
Topic: Router Choice
Replies: 17
Views: 2078

Re: Router Choice

far as i know the "conventional router" would have to be running some form of goldenorb to be able to use the usb/modem card.

I have had my wg3526 running over a year 24/7 and no issues.
by Adm1jtg
Mon Oct 04, 2021 9:21 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Well satellite will ALWAYS have very bad latency its just part of how satellite works. As far as your setup I think we are at the point of the old adage "If it aint broke dont fix it" :) Congrats you are now to the point you shoudnt have to worry about these things anymore and just use it.
by Adm1jtg
Sun Oct 03, 2021 8:13 pm
Forum: Modems - Questions and Support
Topic: upload download speeds
Replies: 3
Views: 411

Re: upload download speeds

Speeds vary greatly not only by location and setup but also by weather, time of day and tower utilization. Even which site you use for testing can give different results. Speedtest.net randomly changes testing servers and different speedtest.net servers give different results. All that said I have s...
by Adm1jtg
Sun Oct 03, 2021 7:49 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

VPN's are complicated, in theory it hides everything from your carrier, but the carrier still has the ability to tell how much data is being used and I believe they can also tell the TYPE of data. They cannot see the details of the data as its encrypted, however, your vpn provider CAN see everything...
by Adm1jtg
Sun Oct 03, 2021 3:28 pm
Forum: VPN
Topic: How to Setup Wireguard on WE826?
Replies: 5
Views: 473

Re: How to Setup Wireguard on WE826?

Does nordvpn even support wireguard protocol?
by Adm1jtg
Sun Oct 03, 2021 3:01 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Well this is why I dont use a vpn myself. At best i get about 25 down and at times as low as 8 down, if I used a vpn I could very easily make my internet unusable, As far as your connection issues I really cant say. I dont have such issues and I only have one viable server to connect to thats well o...
by Adm1jtg
Sat Oct 02, 2021 7:43 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Can you be a little more specific on what you have had to do each time you "finally got it working again" as I see the problems you have had for sure but without knowing what you did to resolve them makes it very difficult to know what your problems might be related to. Again using my own ...
by Adm1jtg
Sat Oct 02, 2021 7:15 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Ok next step is like myself and @Didneywhorl suggested a FULL factory reset, Meaning it wil remove ALL settings and after you will need to add them back in manually. For testing after really the only values you will have to enter are the apn and the ttl settings. If your router is hard to get to lik...
by Adm1jtg
Fri Oct 01, 2021 9:33 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

is there anything in the modem imei field?

What if anything is showing on the modem/status page?

Does it show in a connecting state?
by Adm1jtg
Fri Oct 01, 2021 6:22 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Do a hard reset then, where you hold down the reset button and it brings you back to the chinese screens. I dont have a link to the exact process but its basically hold the reset button in with the unit off, still holding the reset button power on the unit and wait about 30 seconds still holing in t...
by Adm1jtg
Fri Oct 01, 2021 10:33 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

I would do a factory reset the put back just the apn and ttl settings, nothng else. That should get you back to working, At that point we can try and tackle the vpn again if you choose.
by Adm1jtg
Thu Sep 30, 2021 7:50 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

well as a test i would re-run the same confg file making process, but use openvpn, then apply the config file in the same way under services openvpn. Wireguard is new to the router builds openvpn has been there for years. Its even on my build from 5-18-2020 Worth a try anyway, let me know if that se...
by Adm1jtg
Wed Sep 29, 2021 10:23 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Well remember I am on a different firmware version then you as also dont use your vpn but it looks like once youget your config file created on the router you go to services and i would think there should be a wireguard option there. In the wireguard option there should be an inport ovpn option or s...
by Adm1jtg
Mon Sep 27, 2021 10:36 pm
Forum: ZBT Routers
Topic: WE826-T2 + EC25-AF setup
Replies: 3
Views: 804

Re: WE826-T2 + EC25-AF setup

in the router software under modem/connection profile fill in the apn field with VSBLINTERNET click the save and apply button under network/firewall at the top choose custom ttl settings then pick 64 for the ttl value field click save and apply thats it for basic connection. you may need to reboot r...
by Adm1jtg
Sun Sep 26, 2021 8:43 pm
Forum: Tutorials
Topic: Quectel - Programming Carrier Bands and Groups of Bands
Replies: 27
Views: 43633

Re: Quectel - Programming Carrier Bands and Groups of Bands

Well, the answer appears to be no. I noticed my internet was slower than usual, checked and found that the modem had selected B13, occasionally aggregating with B4, but definitely using B13 as primary. Sent AT command to lock onto B4 and got back my high speeds... I had issues like yours and also u...
by Adm1jtg
Sun Sep 26, 2021 8:33 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

what we are going to do is have the router itself run the vpn so once this is all done the router will be running the vpn and thus all devices using the router for imnternet will be using the vpn.

You computer will no longer need to run the vpn software at least when its on the wifi of your router.
by Adm1jtg
Sun Sep 26, 2021 2:39 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

If it lets you type in something that usually means you can pick anything
by Adm1jtg
Sun Sep 26, 2021 12:58 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

ok... https://www.vpnunlimited.com/help/manuals/how-to-manually-create-vpn-conf In step one pick the manually create new device Step 2 just pick a server you want to use. I would just pick one in the USA Step 3 In this document I dont see a choice for wireguard let me know if when you are doing this...
by Adm1jtg
Sun Sep 26, 2021 11:14 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

wireguard usually has an autoconfigure feature is thats whats asking you for the router type? so for wireguard I would try saying I had a mofi 4 or mofi 7 or just tell them you have a generic router running openwrt, if your on the 5-18-2020 version I believe its based on openwrt 18.6 and if your on ...
by Adm1jtg
Sun Sep 26, 2021 11:00 am
Forum: Tutorials
Topic: Installing Splash Page with Live Network Stats in GoldenOrb
Replies: 16
Views: 14694

Re: Installing Splash Page with Live Network Stats in GoldenOrb

@Didneywhorl I asked you in another thread but thought this might help remind you of exactly what I was after. Can you just make a simple module I could add in? I see all kinds of luci-config modules for things like adblock and all. For my needs I am thinking not even replace the current status page...
by Adm1jtg
Sun Sep 26, 2021 8:39 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

Say you have a zbt wg3526, its called lot of other names as well but zbt is the main manufacturer in china that makes them
by Adm1jtg
Thu Sep 23, 2021 12:05 pm
Forum: Firmware
Topic: New WG3526 Firmware
Replies: 9
Views: 1891

Re: New WG3526 Firmware

Gah, sorry. Too many projects have by brain fried. I'll see what I can find for you. No promises for a speedy return though. ;) was thinking how hard would it be to create a module that can be installed under system software that simply redoes the status page to the newer graphical interface we dis...
by Adm1jtg
Wed Sep 22, 2021 10:32 pm
Forum: Firmware
Topic: New WG3526 Firmware
Replies: 9
Views: 1891

Re: New WG3526 Firmware

@Didneywhorl not sure if you saw my other post about this new version as no one has replied but was curious if there was a way to import that status page menu or some way to directly display SINR on the old 5-18-2020 version. The menu visuals of the new version looked close enough that I am hoping y...
by Adm1jtg
Mon Sep 20, 2021 10:41 pm
Forum: Firmware
Topic: newest wg3526 firmware
Replies: 0
Views: 1424

newest wg3526 firmware

Have been running the 5-18-2020 firmware since I went online with this unit. Decided to upgrade to the most current version that is the 9/11/21 version. Did a factory format aka back to chinese menu's to load it up and manually set the few values on the router. Basically APN, TTL and a change in IP ...
by Adm1jtg
Mon Sep 20, 2021 6:37 pm
Forum: General and Unclassified
Topic: WG3526 and GoldenOrb Settings
Replies: 2
Views: 1150

Re: WG3526 and GoldenOrb Settings

I would go back to a full factory reset... where you get the chinese load screen and try to load the firmware clean. If you get the same results I would go back a version and see if the problem still exists. There is a previous version posted in the same area from feb 2021 There is also a version fr...
by Adm1jtg
Sat Sep 18, 2021 4:51 pm
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

I would try a clean factory flash. The type where you go back to the chinese screens and flash a rom. Just for good measure I would use the latest wifix version or you could even try a rooter version though truth be told I have tried both in the past and couldnt see any difference at all But a clean...
by Adm1jtg
Sat Sep 18, 2021 3:52 pm
Forum: Internet Service Providers
Topic: Visible Support
Replies: 5
Views: 1814

Re: Visible Support

how very helpful, just what I would have expected though.
by Adm1jtg
Fri Sep 17, 2021 8:59 am
Forum: WiFiX Routers
Topic: NEXR5GO Router and EP06-A Modem
Replies: 223
Views: 19153

Re: NEXR5GO Router and EP06-A Modem

not sure there is a good one. I am on verizon and while my streaming is good all the time wqhen I try and download files over 10 meg or so it typically drops the conection. Takes me multiple retries with a download manager to get the file downloaded. That or i use a vpn and the fie downloads just fi...
by Adm1jtg
Thu Sep 16, 2021 3:45 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 66
Views: 16800

Re: Wireguard on ROOter?

Many times when updating to a higher, or lower, linux kernel it wont take unless you use the firmware recovery method / bootloader. I do it all the time, it's no harm or hassle in my experience. Oh I know I probably did it a dozen times a year or 2 ago when I was first setting things up, but I noti...
by Adm1jtg
Thu Sep 16, 2021 10:44 am
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 66
Views: 16800

Re: Wireguard on ROOter?

Wasn't able to work out display bugs from using 4x4 MIMO modems. Still working on it. Would you be willing to post the needed update files with directions on how to apply them so I could test it myself? I am only on a 2x2 mimo with an ep06-a modem so while you cant get it to work for ALL wg3526 con...
by Adm1jtg
Wed Sep 15, 2021 9:46 pm
Forum: VPN
Topic: Wireguard on ROOter?
Replies: 66
Views: 16800

Re: Wireguard on ROOter?

but does it have the new status screen that displays SINR?
by Adm1jtg
Wed Sep 01, 2021 5:48 pm
Forum: General and Unclassified
Topic: Modem AT Commands - OpenWRT SnapShot
Replies: 1
Views: 353

Re: Modem AT Commands - OpenWRT SnapShot

Most in here actually use a separate device for WiFi. So a wg3526 for all modem functions using either rooter or wifix, regular golden orb I don't believe directly supports modems thus why you don't have the modem tab. The other device for WiFi is just any simple router connected via Ethernet. Perso...
by Adm1jtg
Wed Sep 01, 2021 3:46 pm
Forum: Questions and Support
Topic: Wilson Antennas
Replies: 92
Views: 11151

Re: Wilson Antennas

My plan for example will throttle at will as their algorithm deems necessary.

I also am on a sparsley populated area, as I keep saying more cows then people and consistently the mornings see downloads between 30-40, while at night it's not at all uncommon to see no faster then 10

Go to advanced search