Wireless Joint

Thanks, Yipzy. I tried issuing that AT command and got no response. When I SSH'd in I got this message: root@ROOter:~# picocom -b 115200 /dev/ttyUSB2 picocom v1.7 port is : /dev/ttyUSB2 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 escape is : C-a local echo is : no noini...

I’ve changed the TTL and made sure time settings are synced. It still tells me Modem Present/Not Connected. AT commands don’t do anything. It just says “Waiting for a Response.” This happens either with or without a SIM card inserted. Even if the SIM is bad, the modem should still be able to respond...

Without a sim card (or one that does not fit right) you are not going to show connected. I have a SIM card installed now. It seemed to fit okay. I felt it click into place. It still shows "Modem Present/Not Connected." Any suggestions? Here are how things look now: Screen Shot 2020-07-24 ...

Thanks for the suggestions about the power. It seems to recognize the modem better now...at least partially. This is what I get without a SIM card installed. Screen Shot 2020-07-23 at 7.57.35 PM.png However, when I go to Miscellaneous Modem Features, I get this: Screen Shot 2020-07-23 at 7.48.09 PM....

Very interesting. I would think the USB3 port on my router would supply enough, but maybe not. I’ll try out a secondary power supply as soon as I find a plug that fits it.

Thanks for the suggestions!

But, I cannot consistently get it to be recognized. Just a few minutes ago it was and then without touching any of the hardware, it says "No Modem Present," but still gives a Modem ID. Very weird.

I gave up with the ones that came with the USB3.0 To NGFF M.2 Key B Adapter Enclosure With SIM Card Slot on The Wireless Haven. It came with two MHF4 pigtails so I bought 2 more from NetSolution.Shop. Those clicked into place on nearly the first try. I ended up spending a little over 30 minutes tryi...

I have since got the two other MHF4 connectors hooked up and lo and behold, it recognizes the modem! Here are the logs: System Log: Sat Jul 18 12:40:25 2020 user.notice usb-modeswitch: Found Modem1 Sat Jul 18 12:40:25 2020 user.notice usb-modeswitch: Connecting a QMI Modem Sat Jul 18 12:40:25 2020 u...

I finally got my Verizon SIM. I have the Quectel EM20-G modem mounted in a USB3.0 To NGFF M.2 Key B Adapter Enclosure With SIM Card Slot. I only have two of the MHF4 pigtails connected at the moment. I have it currently plugged into a Linksys WRT3200ACM running the latest (as of yesterday) Goldenorb...

Viper67857 wrote: ↑Tue Jul 14, 2020 8:46 pm Since the WRT3200ACM has goldenorb support, I'd probably connect the USB enclosure to that, disable the wifi, and wire it to the Asus for all your routing needs.

That’s a great option too! It will be fun to play around with it this weekend.

Thanks for the link on sending AT too.

Thanks, Viper67857, As long as I can adjust APN stuff on the Asus, along with AT commands, I should be good. I’ll post an update once things are hooked up with speeds, etc. When you used your Asus router, do you remember if you just chose the 3G/4G option under USB Application settings? That’s how I...

Excited to have a Quectel EM20-G modem with the M.2 enclosure arriving this Friday. I didn’t go with a router from The Wireless Haven because I love my Asus AX-88U. I have the latest Merlin running on that and it has the hardware chip to make OpenVPN (connected to ExpressVPN in this case) really fly...