Wireless Joint

Thanks i got the t-mobile sim card with the Franklin T10 Mobile Hotspot, changed the APN to "fast.t-mobile.com" on the ROOter modem, but it is still attempting to connect to the modem, not able to connect.

But After it moved to t-mobile it used to connect to the t-mobile servers. was working until recently, is there any debugging i can can do. following is the current debug information i see Thu Jun 23 09:20:16 2022 : /dev/ttyUSB2 AT+COPS=0,,,7 OK Thu Jun 23 09:20:18 2022 : /dev/ttyUSB2 AT+CGDCONT=? +...

Hello, The modem seems to have stopped connecting I get the following message in the modem > connection log (in rOOter) ": Attempting to Connect Modem #1 (Quectel EM12-G)" (does not progress from here , used to work before) I use a sprint sim and rOOter on r7000. Any help would be greatly ...

Hi I am seeing slow speeds. I am not able to figure out what the issue is , I would be very grateful for any help. +QTEMP: "tsens_tz_sensor2","49" +QTEMP: "tsens_tz_sensor3","49" +QTEMP: "tsens_tz_sensor4","49" AT+CNMI=0,0 OK Mon Sep 14 17:...

Thank you I will try to experiment with the internal antennas for now.

I don think this might be a modem issue, but i am having frequent wifi disconnections for devices connected. even if i just have 1 device connected to wifi.

Cannot see any log of the wifi disconnections on r00ter.

Thank you, I am currently using the following antennas 700-2700MHz Cradlepoint 3.5dBi 4G LTE Omni Antenna (2 of them) I was thinking of buying the Netgear 6000450 MIMO Antenna with 2 TS-9 Connectors https://www.amazon.com/dp/B00DN3J03O/ And connect to it, using RG316-Female-Pigtail-Coaxial-Cable, do...

Thank you Didneywhorl I am very grateful for all your help.

Could you review if i have connected the antenna's correctly to the modem (image below), since i was not sure if i did it correctly?

also how could i connect 2 more antennas to the modem

Thank you Didneywhorl :D As recommended I am now powering the modem adapter with a phone charger. I have not noticed any disconnections today, so far so good (Fingers crossed ;)) I have added the code to run at startup at+qindcfg="all",0,1 Should I Lock the EM12-G to Sprint Bands 25/41 and...

Thank you for your response Didneywhorl The router I am using it netgear r7000 with r00ter firmware. Yes I put the SIM card in the usb adapters SIM slot. executed the following command in Modem-->>Miscellaneous-->>AT Command Terminal AT+QCFG="NWSCANMODE",3,1 I set the APN under Modem -->> ...

I flashed r00ter on the router, installed the sim in adapter and placed the modem, attached the antennas.. i get a red light on "USB3.0 To NGFF M.2 Key B Adapter Enclosure With SIM Card Slot" I am not able to get it to work , I seem to be getting some errors, could you help me identify wha...

Thank you Didneywharl, I greatly appreciate your help with answering all the questions and the recommendations . For now I am planning to buy the following: USB3.0 To NGFF M.2 Key B Adapter Enclosure With SIM Card Slot Quectel EM12-G CAT12 M.2 Modem For the "USB3.0 To NGFF M.2 Key B Adapter Enc...

@Didneywhorl Thank you for the detailed explanation, after reading it a couple of times i think, was able to grasp all of it, I do have a couple of questions, tried to represent my understanding in an image. In the image below, I can buy any of the 3 routers which take any of the modems listed in th...

I have a coolpad hotspot from Mobile Citizen - sprint, which I cannot change the band priority (it always defaults to band 25). To change, it requires a MSL input which I don't have. Is there any other router I can buy which will work with Mobile Citizen, by just inserting the mobile citizen sim whi...