Search found 39 matches

by BrandonDillon
Tue Dec 01, 2020 12:34 pm
Forum: Towers, Frequencies and Bands
Topic: The Grass is Always Greener...
Replies: 5
Views: 4989

Re: The Grass is Always Greener...

Keep us posted on the developments. I'm especially interested in the final RPi4 config. I've got a similar side project going with mine, however I'm ignorant when it comes to best practices for Linux stuff, especially network security configuration. I've been curious how the XPOL-2-5G would compare ...
by BrandonDillon
Tue Dec 01, 2020 12:22 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

After the restore the EP06 isn't recognized; shows no modem present under Network Status. The only place it comes up is under Debug Information below the AT command box. Whenever I directly install the EM20 it is recognized however I get the same three CME errors 3/100/14. Also this is a different E...
by BrandonDillon
Mon Nov 30, 2020 2:42 pm
Forum: General and Unclassified
Topic: WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect
Replies: 18
Views: 7693

Re: WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect

Check my video review. Never use 06-14 version. It is faulty. Use 06-10 version https://wirelessjoint.com/viewtopic.php?f=8&t=2022&p=13865#p13865 Good video thanks for sharing. Where did you find a EM160 for sale? I've seen other people mention eBay, but I've yet to see one come up on there.
by BrandonDillon
Mon Nov 30, 2020 12:32 pm
Forum: Towers, Frequencies and Bands
Topic: The Grass is Always Greener...
Replies: 5
Views: 4989

Re: The Grass is Always Greener...

R1250GSA what's your setup look like currently? I would PM but they are disabled. Subscribe me to your wireless newsletter lol
by BrandonDillon
Mon Nov 30, 2020 12:29 pm
Forum: Questions and Support
Topic: Using a drone for optimum antenna placement
Replies: 2
Views: 3248

Re: Using a drone for optimum antenna placement

I've pondered a similar concept. The way I've imaged it is outfitting a drone with an altimeter and flying it slowly around the parameter of the property with varying levels of elevation. Where I'm stuck is figuring out the most optimal way to log the data. The ideal goal would be that I can fly the...
by BrandonDillon
Mon Nov 30, 2020 12:09 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

Thanks Didney The EP06 has been a favorite of mine for customer installs, but I've noticed that they occasionally don't jive well with Verizon at first. Once I've gotten them working it's great, but about every 1 out of 4 EP06 don't want to connect to VZW straight away, but the same ones will immedi...
by BrandonDillon
Wed Nov 25, 2020 2:50 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

So it's definitely the router. I plugged the EP06 into USB adapter (with SIM), connected that into USB extender, and connected the other end into the front of the NEXR5GO and connected antennas. It booted up and worked as it should immediately, so it looks as though this issue only occurs when conne...
by BrandonDillon
Wed Nov 25, 2020 2:22 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

I believe I was mistaken before when previously I said that I put the SIM card in upside down. It started working and I had assumed that was where I made a mistake, however you can't click the SIM into place upside down so I'm doubtful now. I had to use that SIM card for a couple days for my own rou...
by BrandonDillon
Fri Nov 20, 2020 7:58 pm
Forum: Misc Modem Cards and Dongles
Topic: Configuring SIM8200EA
Replies: 25
Views: 17420

Re: Configuring SIM8200EA

Is this the same tech as what was just used to break the 5g speed record in Finland this week? Snapdragon x55 on the phones. That pi hat from waveshare looks awesome
by BrandonDillon
Fri Nov 20, 2020 7:44 pm
Forum: General and Unclassified
Topic: NEXQ6GO + EM7565 getting SIM unknown
Replies: 5
Views: 2493

Re: NEXQ6GO + EM7565 getting SIM unknown

Just dug my NEXQ6GO out and put in a SIM, it's gold contacts up and sticks out a little just like in your photo. It does click into place though. CME ERROR 3: operation not allowed CME ERROR 100: unknown error CME ERROR 14: SIM busy Thu Nov 19 14:25:42 2020 : /dev/ttyUSB2 AT+CIMI ERROR Thu Nov 19 14...
by BrandonDillon
Fri Nov 20, 2020 3:22 pm
Forum: General and Unclassified
Topic: NEXQ6GO + EM7565 getting SIM unknown
Replies: 5
Views: 2493

Re: NEXQ6GO + EM7565 getting SIM unknown

Check and see if your SIM card is inserted correctly. I have an identical router and the same errors and just figured it out after seeing your post. Details on mine for comparison here.
by BrandonDillon
Fri Nov 20, 2020 3:19 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

Well I solved the issue.. SIM card upside down. I checked the three CME errors and noticed they are all related to the SIM card and also saw this post from yesterday which is an identical router throwing identical errors. To clarify, the SIM card contacts (gold side) need to be facing down. Thank yo...
by BrandonDillon
Thu Nov 19, 2020 2:30 am
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

I downgraded the firmware, however I'm getting +CME ERROR: 3 / 100 / 14 Full log: AT+CNUM ERROR AT+CPBR=? +CME ERROR: 100 Wed Nov 18 15:41:44 2020 : /dev/ttyUSB2 AT+CGMI Quectel OK Wed Nov 18 15:41:45 2020 : /dev/ttyUSB2 AT+CGMM EP06 OK Wed Nov 18 15:41:46 2020 : /dev/ttyUSB2 AT+CGSN [ imei ] OK Wed...
by BrandonDillon
Wed Nov 18, 2020 5:17 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

Received the EM20-G, completely forgot it's M.2 and not PCIE so I'll be ordering an adapter from The Wireless Haven tonight. With the EM20-G inside of the enclosure , I plugged it into the USB port of the NEXR5GO and have recognition of the EM20. It causes the router to stop listing the EP06 via the...
by BrandonDillon
Wed Nov 18, 2020 2:38 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

By the way, I have an EM20-G that tracking says should arrive today. Should I expect the same behavior from that modem being that it's the same manufacturer?
by BrandonDillon
Wed Nov 18, 2020 2:37 pm
Forum: MikroTik Routers
Topic: Thoughts on Mikrotik RBM11G / RBM33G
Replies: 22
Views: 12555

Re: Thoughts on Mikrotik RBM11G / RBM33G

docderwood, is it not seeing it in a similar way to this? My NEXR5GO didn't show any connectivity/AT command executions but it still was connected and communicating. If that is the case you can change the comm bus. Here is the name of the image I ended up using "GoldenOrb_2020-03-01 ( OpenWrt 1...
by BrandonDillon
Wed Nov 18, 2020 12:53 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

I did. Also I misspoke on the error, it's repeating this over and over in AT command log: Wed Nov 18 11:52:14 2020 : /dev/ttyUSB2 AT+CPMS="SM" ERROR Wed Nov 18 11:52:34 2020 : /dev/ttyUSB2 AT+CPMS="SM" ERROR Wed Nov 18 11:52:55 2020 : /dev/ttyUSB2 AT+CPMS="SM" ERROR Wed...
by BrandonDillon
Wed Nov 18, 2020 12:13 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

Alright I've made some progress. I implemented the changes via PuTTy and have modem recognition under Network Status (and can see AT commands being executed), however it's stuck connecting and under the AT command console I'm getting Can't open device /dev/ttyUSB over and over. After submitting thos...
by BrandonDillon
Wed Nov 18, 2020 12:16 am
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

Going to give this a try in the AM and report back. Thank you for tackling that so quickly.
by BrandonDillon
Tue Nov 17, 2020 9:03 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

Well done thank you to you and Jim both. I'm currently looking for older firmware to give this a try. If you (or anyone) has a source to download the firmware I'd be grateful.

Also, is there a different procedure to downgrade the firmware on this modem, or does it work the same as an upgrade?
by BrandonDillon
Tue Nov 17, 2020 2:33 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

Thanks for taking a look I'll monitor the thread
by BrandonDillon
Tue Nov 17, 2020 11:28 am
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

GO 2020 06 09

I believe that’s the same firmware that it shipped with too
by BrandonDillon
Sun Nov 15, 2020 10:25 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

Re: NEXR5GO | EP06 | modem present; no connectivity

Additional steps that I've taken since posting: - Reflashed modem factory firmware via USB adapter & Quectel app. I did it according to the manufacturer guide and it passed the first time - Reinstalled the modem into the previous router, a WE826 and it recognized it and works as normal Going to ...
by BrandonDillon
Sat Nov 14, 2020 11:11 pm
Forum: General and Unclassified
Topic: NEXR5GO | EP06 | modem present; no connectivity
Replies: 31
Views: 12351

NEXR5GO | EP06 | modem present; no connectivity

I just received a NEXR5GO from The Wireless Haven and added an EP06 to it that was previously in use in a WE826. Under Modem > Network Status I have no modem present, however it does show the modem by manufacturer and model name under Modem > Debug Information below Device Information despite AT Com...
by BrandonDillon
Thu Sep 17, 2020 9:29 am
Forum: Firmware
Topic: ZBT WG1608, EM20-G, Page Plus, stuck connecting
Replies: 13
Views: 9063

Re: ZBT WG1608, EM20-G, Page Plus, stuck connecting

This may or may not help, but when I had similar issues, Yipzy's advice sorted me out: https://wirelessjoint.com/viewtopic.php?f=19&t=1289&p=10327#p10327 I ran these commands and then rebooted the router and then input the APN again (through the UI) AT+QMBNCFG="AutoSel",0 (stop Aut...
by BrandonDillon
Sun Sep 06, 2020 12:48 pm
Forum: General and Unclassified
Topic: Wanted: Verizon Data SIM, unlimited, unthrottled
Replies: 5
Views: 3086

Re: Wanted: Verizon Data SIM, unlimited, unthrottled

Don't think this is to bad of a price for non POE. Could update modem later when it arrived. https://www.ebay.com/itm/ZBT-WG3526-LTE-Router-w-Quectel-EM06-A/254683586407?hash=item3b4c531f67:g:ohYAAOSw-9leZ6bQ I've purchased a few of these from the same seller since the The Wireless Haven store here...
by BrandonDillon
Mon Jul 27, 2020 6:45 pm
Forum: Misc Modem Cards and Dongles
Topic: WG3526 32M | EP06-A | PagePlus connectivity issues
Replies: 14
Views: 10576

Re: WG3526 32M | EP06-A | PagePlus connectivity issues

It's taken a few months and much assistance from BillA, but I'm happy to report that I've successfully gotten PagePlus working with my setup https://i.imgur.com/2beoFmi.png Ultimately I believe what solved my issue was following Yipzy's advice to disable autoselect config on SIM detection and disabl...
by BrandonDillon
Fri Jul 17, 2020 1:37 pm
Forum: Misc Modem Cards and Dongles
Topic: WG3526 with EC25-AF questions
Replies: 8
Views: 4972

Re: WG3526 with EC25-AF questions

Let us know how it works out with the WG3526 and EP06-A
by BrandonDillon
Tue Jun 30, 2020 10:45 am
Forum: General and Unclassified
Topic: WE826-t2 MT7620A flash from factory firmware to GoldenOrb, Rooter?
Replies: 3
Views: 3439

Re: WE826-t2 MT7620A flash from factory firmware to GoldenOrb, Rooter?

I can't make the WiFix firmware work with my setup so I'm stuck on this firmware myself. I've not been able to upgrade the firmware from within the Intelligent Router software itself and instead have to do it via firmware recovery mode every time (see here: https://wirelessjoint.com/viewtopic.php?f=...
by BrandonDillon
Sun May 17, 2020 4:58 am
Forum: Misc Modem Cards and Dongles
Topic: WG3526 32M | EP06-A | PagePlus connectivity issues
Replies: 14
Views: 10576

Re: WG3526 32M | EP06-A | PagePlus connectivity issues

Update: Getting some modem recognition/communication with WiFix and PagePlus; however still no internet connectivity with PagePlus I updated the firmware from OEM firmware to Wifix GO 2020-03-07. After there was a clean installation (with the Simple SIM inside) I configured it to Simple APN/TTL and ...
by BrandonDillon
Sun May 17, 2020 2:51 am
Forum: Misc Modem Cards and Dongles
Topic: WG3526 32M | EP06-A | PagePlus connectivity issues
Replies: 14
Views: 10576

Re: WG3526 32M | EP06-A | PagePlus connectivity issues

The modem is detected and reachable with the original firmware with both the PagePlus and Simple Mobile SIM cards. There's no field to update the TTL values in the original firmware. There's also no field to enter AT commands through the original firmware. Screenshot with PagePlus SIM (but no TTL va...
by BrandonDillon
Sat May 16, 2020 10:48 pm
Forum: Misc Modem Cards and Dongles
Topic: WG3526 32M | EP06-A | PagePlus connectivity issues
Replies: 14
Views: 10576

Re: WG3526 32M | EP06-A | PagePlus connectivity issues

Update: verified working with simple, but still no go with PagePlus https://i.imgur.com/w7Ft9w4.png I purchased a simple mobile SIM kit and plan today ($50 "unlimited" +5GB hotspot) and had the dealer activate it for me. I flashed back to the original firmware and added this SIM card in an...
by BrandonDillon
Sat May 16, 2020 9:48 pm
Forum: Misc Modem Cards and Dongles
Topic: WG3526 32M | EP06-A | PagePlus connectivity issues
Replies: 14
Views: 10576

Re: WG3526 32M | EP06-A | PagePlus connectivity issues

I ordered that adapter Thursday evening at your recommendation and should be here Wednesday, so I've got some time to tinker with the setup in the meantime.

I'm getting the same response with those AT commands
Image
by BrandonDillon
Sat May 16, 2020 6:25 pm
Forum: Misc Modem Cards and Dongles
Topic: WG3526 32M | EP06-A | PagePlus connectivity issues
Replies: 14
Views: 10576

Re: WG3526 32M | EP06-A | PagePlus connectivity issues

Still no change in behavior. I'm still getting /ttyUSB2 Can't open device. https://i.imgur.com/zOfhvUQ.png Here's my Modem > Connection Log https://i.imgur.com/rjkJwRR.png When I have the original firmware installed it sees the modem at /ttyUSB2 https://i.imgur.com/auLJzui.png I'm assuming the origi...
by BrandonDillon
Fri May 15, 2020 3:11 pm
Forum: Misc Modem Cards and Dongles
Topic: WG3526 32M | EP06-A | PagePlus connectivity issues
Replies: 14
Views: 10576

Re: WG3526 32M | EP06-A | PagePlus connectivity issues

Sending the AT!GSTATUS? to any Quectel modem will just return an error since it's for Sierra modems only. You can try these commands instead: AT+QNWINFO AT+QCAINFO AT+QENG="servingcell" AT+QSIMSTAT? AT+CNUM you might try putting it in LTE only mode. I think the command is: AT+QCFG="n...
by BrandonDillon
Thu May 14, 2020 6:17 pm
Forum: Misc Modem Cards and Dongles
Topic: WG3526 32M | EP06-A | PagePlus connectivity issues
Replies: 14
Views: 10576

WG3526 32M | EP06-A | PagePlus connectivity issues

Issue: Unable to get internet; first time setup of preassembled device. Router: WG3526 32M (aquired from eBay assembled with modem; Chinese bootloader) Original router firmware: OS-mt7621-WG3526-20191101_233404.bin (no TTL settings) Modem: Quectel EP06-A APN: tracfone.vzwentp TTL: 117 (though I've t...
by BrandonDillon
Mon May 04, 2020 2:48 pm
Forum: Misc Modem Cards and Dongles
Topic: Suggestions for Rural Setup
Replies: 6
Views: 9797

Re: Suggestions for Rural Setup

BillA wrote: Thu Mar 26, 2020 6:59 pm Yes as long as it's an M.2 modem connector.
I'm in the same boat as poster above unable to DM. Seeking assistance activating PagePlus SIM for router.

Go to advanced search