Search found 61 matches

by prideauxx
Tue Dec 15, 2020 9:27 am
Forum: Tutorials
Topic: WAN Bonding with ROOter and OpenMPTCProuter
Replies: 218
Views: 153257

Re: OMR Bypass

I'm trying to get my streaming device on my local network to bypass the bonding function and go direct out the master connection. The WAN side of my router receives it's IP (192.168.100.2) via DHCP from the OMR device. The LAN side of my router dishes out 192.168.0.xxx addresses, The IP of my strea...
by prideauxx
Mon Dec 14, 2020 8:50 am
Forum: Tutorials
Topic: WAN Bonding with ROOter and OpenMPTCProuter
Replies: 218
Views: 153257

Re: WAN Bonding with ROOter and OpenMPTCProuter

Quick question-- Has anyone attempted to run a VPN or proxy at the VPS site to further obfuscate/secure connection and bypass blocking done for having a datacenter IP address? Have some time off and may attempt this, but I'm honestly not sure if possible. Considering Pihole can be run from VPS site,...
by prideauxx
Sat Sep 19, 2020 9:17 am
Forum: Internet Service Providers
Topic: Sitrep: AT&T/TMobile Service Providers
Replies: 7
Views: 4328

Re: Sitrep: AT&T/TMobile Service Providers

The TLDR for the original posting/thoughts: Folks are getting terminated for using too much data via unlimited data plans the way that carriers (by very gray definition) say is a violation of TOS One potential way to counter this may be to utilize several ISP's with a load-balancing router setup, or...
by prideauxx
Sat Sep 19, 2020 8:54 am
Forum: Tutorials
Topic: WAN Bonding with ROOter and OpenMPTCProuter
Replies: 218
Views: 153257

Re: WAN Bonding with ROOter and OpenMPTCProuter

Hello! I've successfully setup an OpenMPTCProuter on an Intel-i3 based SBC with 8 Gigabit NIC's (industrial PC/router enclosure) I imported from China (the usual suspects). Pretty much everything went without a hitch, save attempting to find a VPS provider that could potentially provide a residentia...
by prideauxx
Fri Sep 04, 2020 10:18 am
Forum: General and Unclassified
Topic: Wanted: Verizon Data SIM, unlimited, unthrottled
Replies: 5
Views: 3086

Re: Wanted: Verizon Data SIM, unlimited, unthrottled

Hi, This by no means answers your question, but you may wish to consider www.Ubifi.net for an initial, turnkey solution, and go from there. There are other MVNO's as well (I am sure decent and non-decent ones), but I have experience using Ubifi myself, and they don't suck. Upon checking the site rig...
by prideauxx
Fri Sep 04, 2020 10:05 am
Forum: Internet Service Providers
Topic: Sitrep: AT&T/TMobile Service Providers
Replies: 7
Views: 4328

Re: Sitrep: AT&T/TMobile Service Providers

Hello again, A little clarification is likely in order here, as the first post was not an advice seeking column per se, but more sharing an idea to solve a problem very specific to a rural situation where few to no realistic/cost-effective alternatives exist, in light of the ever-changing landscape ...
by prideauxx
Thu Sep 03, 2020 7:55 am
Forum: Internet Service Providers
Topic: Sitrep: AT&T/TMobile Service Providers
Replies: 7
Views: 4328

Sitrep: AT&T/TMobile Service Providers

Hi, I have been reading a lot lately on the crackdowns/plan terminations going on throughout the community. I would imagine this will affect the setup I use sooner or later, as I would define my use as moderate to heavy (400-800GB/month, approximate). I am currently using two MVNO's for TMobile and ...
by prideauxx
Mon Aug 17, 2020 9:50 am
Forum: General and Unclassified
Topic: Overland Traveling
Replies: 3
Views: 2185

Re: Overland Traveling

I read that post before, however it's really hard to find an EM20-G , I wish there was another alternative with lots of frequencies. Reach out to Didneywhorl if you are looking for an EM20-G (I recently bought one from him). He may still have some in stock. You can get his email by contacting BillA...
by prideauxx
Sun Aug 16, 2020 4:07 pm
Forum: Internet Service Providers
Topic: Testing with SimpleMobile
Replies: 34
Views: 22604

Re: Testing with SimpleMobile

Sitrep, Day 15: The SimpleMobile solution, as setup by BillA, is still working strong. Some promising details worth sharing and some equipment alterations worthy of note: With fair certainty, my use so far with this plan, for this period is over 100GB. I have not experienced throttling issues (thoug...
by prideauxx
Sun Aug 16, 2020 3:50 pm
Forum: General and Unclassified
Topic: Losing internet connection, but modem is still connected?
Replies: 10
Views: 5394

Re: Losing internet connection, but modem is still connected?

What provider are you using? If it is AT&T or an AT&T reseller (MVNO), you may be experiencing an issue that has cropped up recently. If this is the case, the issue is not on your end--it is AT&T's doing. More info on this can be found searching the forums (can point you in the right dir...
by prideauxx
Sat Aug 15, 2020 1:10 pm
Forum: Cellular Antennas
Topic: WiFiX 1.7-3.8GHz 2x MIMO Parabolic Grid Antenna
Replies: 6
Views: 6267

WiFiX 1.7-3.8GHz 2x MIMO Parabolic Grid Antenna

After trying out some other flat panels from several sources/vendors, I thought I'd try the parabolic grid 2x MIMO antenna from netsolution.shop (thewirelesshaven.com). What stands out in the specs is an impressive a 21dBi gain from 1710-2690MHz: antenna_specs.jpeg For my specific application, the p...
by prideauxx
Sat Aug 15, 2020 12:19 pm
Forum: Questions and Support
Topic: Question on Polarity of Parabolic Grid Antenna
Replies: 2
Views: 2428

Re: Question on Polarity of Parabolic Grid Antenna

Please understand the non-scientific nature of what I am about to say, as I have nothing but an hour's worth of experimentation to back it up: Arrow points down (towards Earth) This appeared to give the most gain (primary and diversity antennas), as reported by the MOFI4500 (stock). Similar position...
by prideauxx
Sat Aug 15, 2020 10:53 am
Forum: Questions and Support
Topic: Question on Polarity of Parabolic Grid Antenna
Replies: 2
Views: 2428

Question on Polarity of Parabolic Grid Antenna

OK, this may be a silly one, but I'm not understanding the answers I'm researching. Recently purchased a chooching 21dBi gain parabolic grid antenna from netsolutions.shop (thewirelesshaven.com). There is a red arrow on the antenna stick portion (what mounts to the dish) indicating direction of pola...
by prideauxx
Sat Aug 15, 2020 9:09 am
Forum: Misc Modem Cards and Dongles
Topic: Issues with new EM20-G
Replies: 5
Views: 2979

Re: Issues with new EM20-G

To further the discussion (and attempt to make sense of things) I did some digging:

atqprtpara_modem_cmd.jpeg
(source: https://wenku.baidu.com/view/58f3d4b919 ... 9a55b.html)
by prideauxx
Sat Aug 15, 2020 8:14 am
Forum: Questions and Support
Topic: Desperate for expert advice. Will an antenna help with dropped packets?
Replies: 3
Views: 3031

Re: Desperate for expert advice. Will an antenna help with dropped packets?

Deelowe, Your issue sounds quite common regarding a situation many of us have been experiencing in the recent past regarding AT&T MVNO's and service interruptions. Some of the issues specifically report the kit we are both using (MOFI), but from past reads/research, I do not believe it is limite...
by prideauxx
Sat Aug 15, 2020 7:59 am
Forum: Misc Modem Cards and Dongles
Topic: Issues with new EM20-G
Replies: 5
Views: 2979

Re: Issues with new EM20-G

Have you tried to use it as a startup AT command in ROOTer? IIRC there is a setting specifically for it. I'd like to see where that may be--could be useful for future experimentation. I was exploring the WG3526's Linux filesystem via terminal connection (ssh), and grepping for "AT+" comma...
by prideauxx
Fri Aug 14, 2020 8:42 pm
Forum: Misc Modem Cards and Dongles
Topic: Issues with new EM20-G
Replies: 5
Views: 2979

Re: Issues with new EM20-G

Update: No luck whatsover, sadly. It may be a malfunctioning unit. No nvram setting will persist past a reboot. I've been working with BillA to try a number of different approaches, including reverting the firmware to a previous version using a M.2 to USB adapter and a Windows box. No joy. The older...
by prideauxx
Fri Aug 14, 2020 5:15 pm
Forum: Misc Modem Cards and Dongles
Topic: Issues with new EM20-G
Replies: 5
Views: 2979

Issues with new EM20-G

Hello, I'm attempting to configure a Quectel EM20-G for my setup, and have run into a dead end. Specifically, commands that persist on my EM12-G (such as disabling roaming) do not persist across a reboot on the EM20-G. Specifics: I initiate a query command for roaming: AT+QCFG="roamservice"...
by prideauxx
Mon Aug 10, 2020 2:30 pm
Forum: Internet Service Providers
Topic: Testing with SimpleMobile
Replies: 34
Views: 22604

Re: Testing with SimpleMobile

Situation Report: Attached a Poynting model A-XPOL-0002-V3-01 to the WG3526 (SimpleMobile/TMobile towers) after attempting to use it for my MOFI-4500 setup (AT&T towers, which had unusably bad signal compared to the two Wilson model 314453's mounted in my attic). For the WG3526, nonscientific 's...
by prideauxx
Mon Aug 10, 2020 2:01 pm
Forum: Cellular Antennas
Topic: Poynting XPOL-2-5G Antenna (A-XPOL-0002-V3-01) Review
Replies: 11
Views: 9524

Re: Poynting XPOL-2-5G Antenna (A-XPOL-0002-V3-01) Review

Bummer that is is SMA connection. I picked up one of these too while waiting for The Wireless Haven to restock their 15dBi flat panel. Need to see about adapting it to N-type connectors in order to use it with my lightning arrestors. There is an N-Type connector version available, please see below....
by prideauxx
Fri Aug 07, 2020 3:40 pm
Forum: Internet Service Providers
Topic: T-moble / SImple Mobile, NEXQ6GO-U, Quectel EP06
Replies: 12
Views: 7217

Re: T-moble / SImple Mobile, NEXQ6GO-U, Quectel EP06

Ideally, I'd like to go with the WG3526 and at least a Cat 12 modem. Hi JR531--I'm currently experimenting with a WG3526 and a Quectel EM12-G modem (CAT12). I'm currently using SimpleMobile for the MVNO, and so far so good. Still doing some tweaks here and there, but I have no regrets as of yet. Bi...
by prideauxx
Fri Aug 07, 2020 3:17 pm
Forum: OPEN | UNCLASSIFIED
Topic: Posting pictures in forums -- The ideal way?
Replies: 4
Views: 3299

Re: Posting pictures in forums -- The ideal way?

Thank you all. Sorry for being dense.
by prideauxx
Fri Aug 07, 2020 3:12 pm
Forum: Misc Modem Cards and Dongles
Topic: EM12-G Carrier Aggregation AT&T
Replies: 71
Views: 50915

Re: EM12-G Carrier Aggregation AT&T

Does anyone have the A20 firmware available for the EM12-G? I thought I had downloaded it when the link was still valid, but the download is corrupt. Very. Stuck. Thank you for your time and the trouble, if you can help.
by prideauxx
Fri Aug 07, 2020 10:55 am
Forum: OPEN | UNCLASSIFIED
Topic: Posting pictures in forums -- The ideal way?
Replies: 4
Views: 3299

Posting pictures in forums -- The ideal way?

OK--I've got to ask, and please know I've searched for an answer as well as experimented. How do I easily post pics to my forum posts? I am doing something wrong here. The 'add attachment' route doesn't seem ideal, as it just sticks pics at the end of the post (no real editing foo avail) The [img] a...
by prideauxx
Fri Aug 07, 2020 10:47 am
Forum: Cellular Antennas
Topic: Poynting XPOL-2-5G Antenna (A-XPOL-0002-V3-01) Review
Replies: 11
Views: 9524

Re: Poynting XPOL-2-5G Antenna (A-XPOL-0002-V3-01) Review

Antenna kit arrive today. I really like the wall/pole mount swivel antenna. Order placed from https://store.nwtowers.com --they were quick to ship and send tracking (happy). The antenna: antenna.jpeg The mount: mount2.jpeg mount1.jpeg More to come regarding the wall mount I intend on using this with...
by prideauxx
Fri Aug 07, 2020 10:28 am
Forum: Misc Modem Cards and Dongles
Topic: MWC seeking available EM20-G in good shape
Replies: 5
Views: 2759

Re: MWC seeking available EM20-G in good shape

Didneywhorl wrote: Fri Aug 07, 2020 12:04 am I can help.

XXXXXXXXXXXXXXX

I'll remove my email from here in 24 hours
Hi Didneywhorl--we are already chatting via email, thank you (it's Justin D.). Take down email when you can--don't want you getting spammed.
by prideauxx
Thu Aug 06, 2020 5:02 pm
Forum: Internet Service Providers
Topic: Testing with SimpleMobile
Replies: 34
Views: 22604

Re: Testing with SimpleMobile

Situation Report: It's been about 5 days of use with the current SimpleMobile approach, and I am happy to report all is working well. If you are reading this post without having read up on the previous info regarding using SimpleMobile with a Quectel EC25-AF/EM12-G (probably more), I politely urge y...
by prideauxx
Wed Aug 05, 2020 6:11 pm
Forum: Misc Modem Cards and Dongles
Topic: MWC seeking available EM20-G in good shape
Replies: 5
Views: 2759

MWC seeking available EM20-G in good shape

Tried to make that sound like a personal. :)

Joking aside, anyone know where I can source an EM20-G without importing one from China in 4-8 weeks?

Asking for a friend...
by prideauxx
Wed Aug 05, 2020 6:01 pm
Forum: Misc Modem Cards and Dongles
Topic: Heatsink options for modems
Replies: 9
Views: 5360

Re: Heatsink options for modems

https://www.amazon.com/gp/product/B07D4FVC61/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 and https://www.amazon.com/gp/product/B07BDKN3XV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 All day. They have the thermal sticky already on them. They work GOOD. Awesomesauce! Buying some toni...
by prideauxx
Wed Aug 05, 2020 5:56 pm
Forum: Misc Modem Cards and Dongles
Topic: How to put EM12-G into QMI mode?
Replies: 3
Views: 3934

Re: How to put EM12-G into QMI mode?

Hi there, I own an EM12-G too. Cannot take the credit for the info, I got it from BillA, who would likely be answering this if I had not beat him to the punch! From BillA: Mode change commands: AT+QCFG="usbnet",0 Place into QMI If that doesn't work then try: AT+QPRTPARA=3 Master reset I ha...
by prideauxx
Sun Aug 02, 2020 10:58 pm
Forum: Internet Service Providers
Topic: Questions about Simple Mobile
Replies: 2
Views: 2251

Re: Questions about Simple Mobile

Welcome to the forums! Regarding your question—the stage of technical maturity of which you ask currently is best described as hobbyist. I recently burned through 150 dollars over several days in service plans to learn a somewhat obvious lesson (it happens). If you are going to be working full time ...
by prideauxx
Sun Aug 02, 2020 8:16 pm
Forum: Cellular Antennas
Topic: Poynting XPOL-2-5G Antenna (A-XPOL-0002-V3-01) Review
Replies: 11
Views: 9524

Re: Poynting XPOL-2-5G Antenna (A-XPOL-0002-V3-01) Review

I've got one, been happy with it using ATT. Not sure how it compares with the The Wireless Haven as I have different setups for the two (Poyning with a 25 foot cable run, LTE extremely short with outdoor router). Glad to hear. I just did (another) amateur tower survey. It would appear the reason I'...
by prideauxx
Sun Aug 02, 2020 7:04 pm
Forum: Cellular Antennas
Topic: Poynting XPOL-2-5G Antenna (A-XPOL-0002-V3-01) Review
Replies: 11
Views: 9524

Poynting XPOL-2-5G Antenna (A-XPOL-0002-V3-01) Review

Hi all, I did a brief search for this on the forum, but as of yet have no real details on someone's real-world use regarding one of these (soon to change). I just bought this with plans for a high wall mount (bought the swiveling antenna mount as well). Specs look decent, and it will be my first tru...
by prideauxx
Sun Aug 02, 2020 12:54 pm
Forum: Misc Modem Cards and Dongles
Topic: Fibocom NL952-NA Modem 4x4 Mimo?
Replies: 37
Views: 24132

Re: Fibocom NL952-NA Modem 4x4 Mimo?

To be honest even when the EM12 even without the Carrier Aggregation runs good! I got whole allot of stuff recently bought and had no intention of keeping all of it. If you don't need TTL settings this Fibocom works just fine just want the ability to have TTL and most my family needs it. They are o...
by prideauxx
Sun Aug 02, 2020 12:52 pm
Forum: Misc Modem Cards and Dongles
Topic: EM12-G Carrier Aggregation AT&T
Replies: 71
Views: 50915

Re: EM12-G Carrier Aggregation AT&T

With the intention of using it only to upgrade the firmware on the EM12-G, I recently purchased this: I'll report back with results when it arrives.
by prideauxx
Sun Aug 02, 2020 12:40 pm
Forum: Misc Modem Cards and Dongles
Topic: EM12-G Carrier Aggregation AT&T
Replies: 71
Views: 50915

Re: EM12-G Carrier Aggregation AT&T

I bought the adapter inside the modem from the Facebook store. Didn't want another thing outside the router to deal with. Eventually mine will be in the attic again. The facebook store would be my first choice as well. They are offline for the immediate future however, so no joy there. Looking into...
by prideauxx
Sun Aug 02, 2020 12:33 pm
Forum: Misc Modem Cards and Dongles
Topic: Fibocom NL952-NA Modem 4x4 Mimo?
Replies: 37
Views: 24132

Re: Fibocom NL952-NA Modem 4x4 Mimo?

Well I had my system get over heated in an attic. Them decided wanted to upgrade. So been buying multiple things to try them out. Whether I get this to work or not plan on selling it. Also have a Quectel EP06 & EM12. Thinking of trying a EM20 next. Do this for myself and family and friends in t...
by prideauxx
Sun Aug 02, 2020 12:21 pm
Forum: Misc Modem Cards and Dongles
Topic: Fibocom NL952-NA Modem 4x4 Mimo?
Replies: 37
Views: 24132

Re: Fibocom NL952-NA Modem 4x4 Mimo?

Hi gsheb,

I honestly hope you get the WG1608 working and don't need to sell it--it looks like decent kit. I may be interested though if it comes to that. Watching intently your experience here, as it seems we are in similar boats.

Best,

Justin
by prideauxx
Sun Aug 02, 2020 12:18 pm
Forum: Misc Modem Cards and Dongles
Topic: EM12-G Carrier Aggregation AT&T
Replies: 71
Views: 50915

Re: EM12-G Carrier Aggregation AT&T

Now got EM12 installed back in WG3526 and tested it and it worked.. Now doing CA bands 2 & 12 on T-mobile with the new version A20 firmware. I'm having similar CA issues with a EM12-G running firmware reported as 'EM12GPAR01A18M4G' (TMobile). Thankfully I was able to download the shared files f...
by prideauxx
Sun Aug 02, 2020 11:51 am
Forum: Misc Modem Cards and Dongles
Topic: Heatsink options for modems
Replies: 9
Views: 5360

Heatsink options for modems

Hi all, Seriously considering heatsink options for my current attic modem setups. Curious what those have found to work best and what sort of thermal paste/glue sticky-stuff you used to attach to the modem in question. Links are welcome! Current setup is a Quectel EM12-G in a WG3526 that just went i...
by prideauxx
Sun Aug 02, 2020 10:45 am
Forum: Internet Service Providers
Topic: Testing with SimpleMobile
Replies: 34
Views: 22604

Re: Testing with SimpleMobile

Situation Report: First off and this is IMPORTANT if you have not read up on past posts regarding this subject: It appears SimpleMobile is getting wise to router use, and is suspending/hotlining/blocking SIMS based on a number of criteria. You've been warned. Backstory: Using a EC25-AF modem in a WG...
by prideauxx
Sat Aug 01, 2020 6:05 pm
Forum: OPEN | UNCLASSIFIED
Topic: Ltefix.com
Replies: 4
Views: 3135

Re: thewirelesshaven.com

Happy weekend, all!

Was wondering when netsolution.shop and/or thewirelesshaven.com may be open again. Hopefully soon (and sensitive to the recent move—hope all is well).

Take my money, please!

Best,

Justin
by prideauxx
Sat Aug 01, 2020 12:55 pm
Forum: General and Unclassified
Topic: EM12-G in a WG3526
Replies: 1
Views: 1939

Re: EM12-G in a WG3526

As a side note (and a FYI), although there is no performance issue or lack of connectivity due to it, the modem active LED ("3G/4G") on the WG3526 is no longer functioning while using the EM12-G (located in a PCI-E to M2 adapter). Testing has shown the LED is functional, and can be manuall...
by prideauxx
Fri Jul 31, 2020 5:33 pm
Forum: General and Unclassified
Topic: EM12-G in a WG3526
Replies: 1
Views: 1939

EM12-G in a WG3526

First surgery done on my WG3526. I replaced the EC25-AF with a EM12-G. Fairly straightforward. I was under the impression that the EM12-G had three antenna ports for 3x MIMO. This is not the case. It has Main, Div, and GNSS antenna ports. I drilled and added the third port anyway, as I bought the co...
by prideauxx
Fri Jul 31, 2020 5:12 pm
Forum: Internet Service Providers
Topic: Testing with SimpleMobile
Replies: 34
Views: 22604

Re: Testing with SimpleMobile

Looks like it may not be limited to EC25-AF; EM12-G looks to be hotlined on Simple within hours of use as well.
by prideauxx
Fri Jul 31, 2020 8:01 am
Forum: General and Unclassified
Topic: New ZBT WG1608 5G-ready router + GoldenOrb firmware
Replies: 218
Views: 152555

Re: New ZBT 5G-ready router WG1608 + GoldenOrb firmware

Where are you guy sourcing these from? I may be interested in buying one, but so far prices appear above $530 US for single piece orders from China.
by prideauxx
Tue Jul 28, 2020 8:49 am
Forum: Internet Service Providers
Topic: Any thoughts on CricketWireless?
Replies: 4
Views: 3315

Re: Any thoughts on CricketWireless?

Thinking out loud- If your signal was strong enough so you could keep costs low without additional, expensive antenna kit, bundle 3-4 of these plans (each with its own modem/hardware setup) into a load balancing/failover router. Or figure out how to do this with a single piece of router kit and 3-4 ...
by prideauxx
Tue Jul 28, 2020 6:11 am
Forum: Internet Service Providers
Topic: Testing with SimpleMobile
Replies: 34
Views: 22604

Re: Testing with SimpleMobile

Situation report: Many thanks to BillA for setting up the SimpleMobile SIM with video compression disabled. Router is up and running with some details to note: * This is not the intended modem I'll be using (currently EC25-AF, Cat4 modem, which I do not believe does CA) * The base-grade antennas are...
by prideauxx
Sun Jul 26, 2020 3:56 pm
Forum: Internet Service Providers
Topic: Testing with SimpleMobile
Replies: 34
Views: 22604

Re: Testing with SimpleMobile

Found this while looking up the field service number for an IPhone device. Good video with descriptions and candid use the the my favorite word, "bullshit." Hope it helps someone.

(Phone Keypad) *3001#12345#* (Call)

Video link:
* https://www.youtube.com/watch?v=9uPEEznQxtA
by prideauxx
Sun Jul 26, 2020 3:10 pm
Forum: Internet Service Providers
Topic: Testing with SimpleMobile
Replies: 34
Views: 22604

Testing with SimpleMobile

I just went to my not-so-local 7-11 and picked up the 'Keep Your Own Phone SIM kit' from SimpleMobile. Cost was about a dollar and change. Going to ping BillA about it and see what I can do regarding getting it setup with an old, unlocked IPhone and turning off 480P video compression. Will post resu...
by prideauxx
Sun Jul 26, 2020 9:33 am
Forum: General and Unclassified
Topic: POE Splitter for WG3526 (non-P version)
Replies: 5
Views: 3082

Re: POE Splitter for WG3526 (non-P version)

This is likely overkill:
* StarTech.com UPOESPLT1G StarTech Network 1Port 60W PoE Injector Splitter Kit (about $170 US)

I am surprised that there aren't many common options for a 12V DC POE splitter rated at 3Amps (36watts).
by prideauxx
Sun Jul 26, 2020 9:02 am
Forum: General and Unclassified
Topic: POE Splitter for WG3526 (non-P version)
Replies: 5
Views: 3082

Re: POE Splitter for WG3526 (non-P version)

You are correct, Viper67857--the barrel jack looks to be 5.5 x 2.1 x 10mm (a 2.1mm jack) The 48V to 12V 3A POE+ Gigabit Splitter sold by thewirelesshaven.com & https://facebook.com/netsolution.shop/shop/ appears to be a solid choice as well. Alternatives to facebook stores TBD--for a 3Amp soluti...
by prideauxx
Sun Jul 26, 2020 8:17 am
Forum: General and Unclassified
Topic: POE Splitter for WG3526 (non-P version)
Replies: 5
Views: 3082

POE Splitter for WG3526 (non-P version)

Hello, Addressing current supply/demand concerns, I purchased a used WG3526 recently. It is the non-POE version. My setup will eventually evolve into the need to support this using POE. Thankfully, there are options (I am currently powering my MOFI4500 using an injector/splitter setup with decent su...
by prideauxx
Sun Jul 26, 2020 7:29 am
Forum: General and Unclassified
Topic: Setting TTL on the WG3526 with an EC25 Modem
Replies: 4
Views: 3738

Re: Setting TTL on the WG3526 with an EC25 Modem

This is excellent. Thank you! iptables approach is a good alternative—I can muck through it if I spend enough time researching what it is I’m trying to do due to lack of often/common use (my fault/problem, not iptables fault). It’s a bad excuse, but the one I am currently using. Thank you again.
by prideauxx
Sun Jul 26, 2020 7:24 am
Forum: OPEN | UNCLASSIFIED
Topic: Ltefix.com
Replies: 4
Views: 3135

Re: thewirelesshaven.com

Thank you. Was confused that I could still use the cart on the website (lesson learned). Placed an order as recommended, then surprisingly had to undo all the ‘help’ facebook did for me (like linking paypal to facebook marketplace without asking).
by prideauxx
Sat Jul 25, 2020 7:41 pm
Forum: General and Unclassified
Topic: Setting TTL on the WG3526 with an EC25 Modem
Replies: 4
Views: 3738

Re: Setting TTL on the WG3526 with an EC25 Modem

Answering this question myself as well, in hopes of helping others.

For the WG3526, it would appear that the Mini PCI-E to M.2 adapter to use is the one with the top-mounted SIM card tray. Link below, thank you, and sorry.
* https://wirelessjoint.com/viewtopic.php?f=17&t=832
by prideauxx
Sat Jul 25, 2020 7:36 pm
Forum: OPEN | UNCLASSIFIED
Topic: Ltefix.com
Replies: 4
Views: 3135

thewirelesshaven.com

Apogies in advance for the silly question--it would appear there is stock at thewirelesshaven.com for some things I would like to purchase (Mini PCI-E to M.2 adapter card and a Quectel EM20-G modem). Although the store is technically closed, is it possible to purchase these items? I'd much rather do...
by prideauxx
Sat Jul 25, 2020 5:43 pm
Forum: General and Unclassified
Topic: Setting TTL on the WG3526 with an EC25 Modem
Replies: 4
Views: 3738

Re: Setting TTL on the WG3526 with an EC25 Modem

Set TTL on WG3526 running 'openwrt-WiFiX-WG3526-GO2020-05-16-upgrade.bin': * Network --> Firewall --> Custom TTL Settings * Check 'Enabled' * Set TTL as desired from textbox 'TTL Value' Likely perform a device reboot afterwards--not sure if necessary, but it ensures the settings take effect. This wa...
by prideauxx
Sat Jul 25, 2020 4:53 pm
Forum: General and Unclassified
Topic: Setting TTL on the WG3526 with an EC25 Modem
Replies: 4
Views: 3738

Setting TTL on the WG3526 with an EC25 Modem

Hello! I've been stalking the board for some time. I have a rural setup that currently consists of a Mofi4500 using Ubifi.net MVNO's data plan. My background is computer science and electrical engineering, and I've worn a few hats over the years with a few different places. When I first joined early...
by prideauxx
Thu Apr 02, 2020 8:58 pm
Forum: Misc Modem Cards and Dongles
Topic: Advice on getting 6 concurrent LTE connections to a server
Replies: 2
Views: 7038

Re: Advice on getting 6 concurrent LTE connections to a server

Hi. I had planned on doing something similar, albeit with only two LTE modems. I came up with the following solution using an EdgeRouter 4 (there are more upscale variants of this, but it fit the bill for me); may help--may not. https://help.ubnt.com/hc/en-us/articles/205145990-EdgeRouter-WAN-Load-B...
by prideauxx
Thu Apr 02, 2020 8:30 pm
Forum: Misc Modem Cards and Dongles
Topic: Suggestions for Rural Setup
Replies: 6
Views: 9797

Re: Suggestions for Rural Setup

Hello, This originally was going to be a DM to BillA, but likely due to the newness of my membership here, I cannot yet do this. First time poster; just joined. I live out in the sticks at the intersection of VA/MD/WVA. I'd been using an Ubifi-MVNO-based Internet solution (using AT&T's networks)...

Go to advanced search