Search found 54 matches

by JoshKelly
Sat Jan 01, 2022 4:24 pm
Forum: Quectel Modems
Topic: EM160R-GL
Replies: 9
Views: 930

Re: EM160R-GL

Give us an example of a failed/errored AT command that you tried. Maybe a few. Here is what I tried, they all error out or time out: AT+QNWLOCK="common/4g",1,410,310 AT+QNWLOCK="common/4g",1,310,410 AT+QNWLOCK="common/LTE",1,410,310 AT+QNWLOCK="common/LTE",1,...
by JoshKelly
Sat Jan 01, 2022 2:49 pm
Forum: Quectel Modems
Topic: EM160R-GL
Replies: 9
Views: 930

Re: EM160R-GL

So I have messed around with AT+QNWLOCK today with no luck. When I issue: AT+QNWLOCK=? +QNWLOCK: "common/4g",<num of cells>,[[<freq>,<pci>],...] +QNWLOCK: "common/lte"[,<action>[,<EARFCN>,<PCI>[,<status>]]] AT+QENG="neighbourcell" +QENG: "neighbourcell intra",...
by JoshKelly
Sat Jan 01, 2022 8:21 am
Forum: Quectel Modems
Topic: EM160R-GL
Replies: 9
Views: 930

Re: EM160R-GL

Look into how to use the command AT+QNWLOCK This will lock the modem to a specific radio (band) on a specific tower, but still allow CA with other bands on that tower. I've honestly never used it so I'm not the expert on the command. I just know of the command. If you are using WiFiX firmware, try ...
by JoshKelly
Fri Dec 24, 2021 2:36 pm
Forum: Quectel Modems
Topic: EM160R-GL
Replies: 9
Views: 930

Re: EM160R-GL

Use the command AT+QPRTPARA=3 When your modem comes back, use the command: AT+QPRTPARA=1 Done. Factory reset modem. Not real healthy to do to the modem very often, so be conservative. It's usually best to track the settings you made and undo them if needed. Thank you so much! I will do this once an...
by JoshKelly
Tue Dec 14, 2021 2:40 pm
Forum: Quectel Modems
Topic: EM160R-GL
Replies: 9
Views: 930

EM160R-GL

Is it possible to completely reset one of these modems? I would like to upgrade to the latest firmware for the modem, then reset everything to factory and then make sure all the setting are changed for ATT. If so can someone help me with resetting mine and then help me make sure all the settings are...
by JoshKelly
Fri Aug 13, 2021 8:11 am
Forum: General and Unclassified
Topic: WG1608 (v1) + EM160R GO firmware issues
Replies: 6
Views: 1489

WG1608 (v1) + EM160R GO firmware issues

Hey all, I am having some troubles with the newer version of GO's that are newer than 18.0x. I have a wg1608 (v1) + em160r + att elite Basically if I flash a build that is based on 18.0x my speeds are double to anything newer and it works with my edgerouter 10 (plug and play), after setting apn to b...
by JoshKelly
Mon Feb 15, 2021 7:02 am
Forum: General and Unclassified
Topic: IPv6 only setup help
Replies: 4
Views: 1583

Re: IPv6 only setup help

I am on a journey right now trying to figure out a IPv6 tmobile setup. Currently what I think I have figured (I definitely could be wrong): First off all of my testing is done with a wg1608 and we826. Modems tested are ep06 and em160. Tmobile plan tested is a magenta plus plan with 3 lines. All firm...
by JoshKelly
Mon Feb 08, 2021 7:00 am
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

I'm sure the antenna was correct, I put the stock antenna back on for now. firmware check shows update available but can not get the page to open just shows page not found. http://ofmodemsandmen.com/upload/WG1608-GO2020-12-24c.zip that has 18.06 http://ofmodemsandmen.com/upload/WG1608-GO2020-12-21....
by JoshKelly
Fri Feb 05, 2021 8:28 pm
Forum: General and Unclassified
Topic: Need some help please
Replies: 7
Views: 1953

Re: Need some help please

You may try version A05 firmware on the EM160: https://drive.google.com/file/d/1iMy3QNqA9AhunslSz0yAFqt-85lEfY-F/view?usp=sharing Also, the WG1608 seems to have an issue with the EM160, and Im not sure what it is. BUT you might try using the EM160 in an adapter enclosure, instead of direct in the r...
by JoshKelly
Fri Feb 05, 2021 7:59 pm
Forum: General and Unclassified
Topic: Need some help please
Replies: 7
Views: 1953

Re: Need some help please

You may try version A05 firmware on the EM160: https://drive.google.com/file/d/1iMy3QNqA9AhunslSz0yAFqt-85lEfY-F/view?usp=sharing Also, the WG1608 seems to have an issue with the EM160, and Im not sure what it is. BUT you might try using the EM160 in an adapter enclosure, instead of direct in the r...
by JoshKelly
Fri Feb 05, 2021 4:16 pm
Forum: General and Unclassified
Topic: Need some help please
Replies: 7
Views: 1953

Re: Need some help please

Hello, Honestly don't know the answer to your problem. Have a couple suggestions to try. First is that have always used TTL of 64 on T-Mobile. Second is to try and set the dns on your WG1608 router following this link. https://wirelessjoint.com/viewtopic.php?f=19&t=1303&start=10#p10732 I pr...
by JoshKelly
Fri Feb 05, 2021 10:26 am
Forum: General and Unclassified
Topic: Need some help please
Replies: 7
Views: 1953

Need some help please

Hey guys I have been having problems with DNS, and DMZ mode. My setup a wg1608 in dmz mode being passed to my er12. I have been beating my head against the wall trying to get things working. To troubleshoot I have completely eliminated the er12 and am connected directly to the wg1608. I did a factor...
by JoshKelly
Fri Feb 05, 2021 8:02 am
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Are you using the 19.07 or 18.06 version of rooter? I had almost the exact same issue. I had to switch back to the 18.06 based version. Also make sure your antennas are connected correctly
by JoshKelly
Thu Feb 04, 2021 6:10 am
Forum: General and Unclassified
Topic: IPv6 only setup help
Replies: 4
Views: 1583

IPv6 only setup help

Hey all I need someone much smarter in networking to help me out please. Recently with having to work from home I find the need to connect to my server remotely essential. I can achieve this with a dns service like duckdns and a service that automatically updates my ip every so often because of the ...
by JoshKelly
Wed Feb 03, 2021 6:20 am
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Didneywhorl wrote: Wed Dec 16, 2020 11:20 am That is the latest version for sure.
Here is another version they sent me, will be some time before I can update:
https://arkomasurvey-my.sharepoint.com/ ... Q?e=ihYgPI

Maybe the CA problems are fixed?
by JoshKelly
Mon Feb 01, 2021 6:24 am
Forum: Tutorials
Topic: DMZ - Alternative to Bridging a Router
Replies: 31
Views: 37304

Re: DMZ - Alternative to Bridging a Router

Hey guys I have followed the guides for DMZ but for some reason my WG1608 is still trying to handle DNS assignment, any ideas? Is there a config file I can paste in here to make sure I have everything configured properly?
by JoshKelly
Sun Jan 10, 2021 8:27 pm
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Obviously there are some hardware/software differences between those routers, but you should be able to tweak it to make it work. If you're using any kind of router behind a mobile router, you would want to set the mobile router into bypass mode so it doesn't do any routing/firewall functions, and ...
by JoshKelly
Sun Jan 10, 2021 8:26 pm
Forum: Tutorials
Topic: DMZ - Alternative to Bridging a Router
Replies: 31
Views: 37304

Re: DMZ - Alternative to Bridging a Router

Didneywhorl wrote: Sun Jan 10, 2021 2:46 pm iptables should apply the mangle to all traffic through the interface specified. I think at least.
Thank you so much Didney 🙂!
by JoshKelly
Thu Jan 07, 2021 12:22 pm
Forum: Tutorials
Topic: DMZ - Alternative to Bridging a Router
Replies: 31
Views: 37304

Re: DMZ - Alternative to Bridging a Router

OpenWRT/LEDE does not have a true bridge mode. The closest configuration to bridging is to DMZ (De-Militarized Zone) all traffic from the gateway router (WE826) to a secondary router/device (MAIN ROUTER) which will handle the DHCP and Firewall. Does this break the custom TTL settings in GO if I fol...
by JoshKelly
Thu Jan 07, 2021 6:17 am
Forum: Firmware
Topic: WiFix DNS servers?
Replies: 2
Views: 2229

Re: WiFix DNS servers?

I don't know the answer for this question, but I can answer your question about changing the GoldenOrb DNS servers. GoldenOrb out of the box does not have an assigned name server, it defaults to whatever your ISP uses, you can change that though Network and Modem. Network --> Interfaces --> Lan (ed...
by JoshKelly
Wed Jan 06, 2021 11:02 am
Forum: Firmware
Topic: WiFix DNS servers?
Replies: 2
Views: 2229

WiFix DNS servers?

Does WiFix use different DNS servers than regular GoldenOrb? If so how would I made regular GO match WiFix's? I have some weird stuff going on with my smart devices on regular GoldenOrb but works fine with WiFix?

Thank you!
by JoshKelly
Sun Dec 27, 2020 7:45 pm
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Any ideas why all my smart devices, ie tp-link light switches and honey well themorstat will not work after swapping out the we826 with the wg1608? I have an edge router 12 and a tplink ap for my network. I can put the we826 with wifix back in place of the wg1608 and everything works great. Is there...
by JoshKelly
Sun Dec 27, 2020 7:40 pm
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

BillA wrote: Sat Dec 26, 2020 1:44 am If you're feeling adventurous, you may try ECM mode, which is supposed to reconnect automatically on link disconnects. YMMV

Code: Select all

AT+QCFG="usbnet",1
Thank you BillA, I gave it a shot, it just says failed to connect to network like when in qmi
by JoshKelly
Fri Dec 25, 2020 4:33 pm
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Are you mixing the antennas? One 2x2 MIMO antenna should be attached to M and D/6 and the other 2x2 MIMO antenna should be hooked to M1 and M2. If they are mixed you will have issues I believe. See if the modem is set to Data centric use. AT+QNWPREFCFG="ue_usage_setting",1 Though I honest...
by JoshKelly
Fri Dec 25, 2020 5:47 am
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Are you mixing the antennas? One 2x2 MIMO antenna should be attached to M and D/6 and the other 2x2 MIMO antenna should be hooked to M1 and M2. If they are mixed you will have issues I believe. See if the modem is set to Data centric use. AT+QNWPREFCFG="ue_usage_setting",1 Though I honest...
by JoshKelly
Thu Dec 24, 2020 11:01 pm
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

To add to this, if I swap out the em160 with the ep06a into the wg1608 and change nothing else I get band 4 with ca 12 and my speeds are back to 60mbps
by JoshKelly
Thu Dec 24, 2020 7:30 pm
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

I'm not having any luck with the EM160 in the wg1608. My old setup was the we826 with the ep06a. It would connect to band 4 and ca with 12. I would see speeds around 60mbps. With the wg1608 I added another omni flat panel below the existing panel on the pole for 4x4. Updated goldenorb to the 12/21 b...
by JoshKelly
Thu Dec 24, 2020 1:53 pm
Forum: Modems - Questions and Support
Topic: EM160R-GL AT commands
Replies: 1
Views: 1105

Re: EM160R-GL AT commands

Does anyone know the AT commands for the EM160R-GL? I cannot get the usual commands from the excel sheet to work, it just errors out. I suspect I am band locked to 66 right now. My old ep06a would CA 4&12 and 66&12 the em160 is stuck on 66. Thank you Josh Nevermind guys, found this: https:/...
by JoshKelly
Thu Dec 24, 2020 1:50 pm
Forum: Modems - Questions and Support
Topic: EM160R-GL AT commands
Replies: 1
Views: 1105

EM160R-GL AT commands

Does anyone know the AT commands for the EM160R-GL? I cannot get the usual commands from the excel sheet to work, it just errors out. I suspect I am band locked to 66 right now. My old ep06a would CA 4&12 and 66&12 the em160 is stuck on 66.

Thank you
Josh
by JoshKelly
Thu Dec 17, 2020 5:33 am
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Didneywhorl wrote: Wed Dec 16, 2020 5:16 pm It should be fine to use an adapter, but I would get a usb to m.2 direct adapter.
I finally got it to work, for some reason it did not like usb 3 ports.
Again thank you so much for your help :)!!!
by JoshKelly
Wed Dec 16, 2020 4:29 pm
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

That is the latest version for sure. Thank you so much for the walk through!! Mine errors out on me, does it have to be in a m.2 usb enclosure? I have a usb pci-e adapter with the pci-e to m.2 adapter installed in it. I suspect I have bricked the em160 at this point because it errors out about half...
by JoshKelly
Wed Dec 16, 2020 6:30 am
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

An alternative, you could leave the WG1608 inside the home to be used as your main router, and connect the modem inside an inexpensive usb enclosure on the roof via a long usb extension cable to the router's usb port (you could even use a cheap Android phone as a modem on the roof ;~). I've done it...
by JoshKelly
Wed Dec 16, 2020 6:28 am
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Thank Didney! I will try to keep emailing them to see if they will send me the new firmware Hi Didney, this is what Quectel sent me for firmware: https://arkomasurvey-my.sharepoint.com/:u:/p/joshkelly/EfcNUHd4D91MsMN_odY2kNQBo8AhsxEplOkEwrxiLDTFOA?e=4nngYo Not sure how to get it in a format for the...
by JoshKelly
Wed Dec 09, 2020 8:27 pm
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Didneywhorl wrote: Wed Dec 09, 2020 5:57 pm The latest version fw for the EM160R-GL is version A04. (EM160RGLAUR02A04M4G)

Though I do not yet have a copy, I only have A03 on file. The newest modems received already have A04 on them.
Thank Didney! I will try to keep emailing them to see if they will send me the new firmware
by JoshKelly
Wed Dec 09, 2020 8:25 pm
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

Re: WG1608 Setup help

Try running the latest firmware version WG1608-GO2020-12-02, it usually contains bug fixes. https://www.ofmodemsandmen.com/upload/WG1608-GO2020-12-02.zip The EM16 is a new modem, and probably will come with the latest firmware anyway. When contacting Quectel support, they require you to include the...
by JoshKelly
Wed Dec 09, 2020 5:47 am
Forum: General and Unclassified
Topic: WG1608 Setup help
Replies: 32
Views: 12138

WG1608 Setup help

Hi all, back again for hopefully some more help on my new setup :) My WG1608D-M and EM160R-GL should be arriving in the next few days and I am needing some help on the initial setup. I am with T-Mobile and my current setup is a WE826(with WiFix) and the EP06A. I will not be using the WiFi part of th...
by JoshKelly
Mon Nov 23, 2020 12:11 pm
Forum: General and Unclassified
Topic: WE826 TTL confusion?
Replies: 6
Views: 2638

Re: WE826 TTL confusion?

I would guess 65 or 66. Set it and check to see if your data is counting as hotspot data or not. Dont forget the ipv6 'ttl' (HL) I use TTL 64 for T-Mobile Thanks guys, I will log in and see what it is currently being reported as. I just didn't know what TTL value we are after when I ping google or ...
by JoshKelly
Sun Nov 22, 2020 3:49 pm
Forum: General and Unclassified
Topic: WE826 TTL confusion?
Replies: 6
Views: 2638

WE826 TTL confusion?

If I set my TTL in WiFix to 65 when I ping 8.8.8.8 in CMD it returns 63

If I set my TTL in WiFix to 67 when I ping 8.8.8.8 in CMD it returns 65

Which would be correct for tmobile?
by JoshKelly
Mon Nov 09, 2020 9:50 am
Forum: Tutorials
Topic: NEXP1GO (WG3526-P) Router w/Sierra MC7455 Modem inside a WiFiX 19dBi Antenna Enclosure
Replies: 94
Views: 110964

Re: WG3526-P Router w/Sierra MC7455 Modem inside a DM25X19 Antenna

Getting started with the Router body. We gut the router... Awesome read/guide!! Based my setup off this guide!! Currently I have the WE826 in a box mounted on some 1/2" gas pipe coming off the corner of my house about 3ft high, also has a omni mimo antenna mounted to it. I am not currently gro...
by JoshKelly
Mon Nov 09, 2020 7:38 am
Forum: Internet Service Providers
Topic: U.S. Cellular
Replies: 0
Views: 913

U.S. Cellular

Is anyone using U.S. Cellular with any luck? Called them and they said my EP06(told them it is a tablet) IMEI says compatible with the network. My ATT unlimited tablet plan is acting very weird lately. Being throttled to 3.5Mbps for all my streaming services unless I run through Nord. Still a very s...
by JoshKelly
Sun Nov 08, 2020 9:00 pm
Forum: General and Unclassified
Topic: WE826-T2 POE
Replies: 4
Views: 1347

Re: WE826-T2 POE

https://www.amazon.com/dp/B07F8Z2RQL/re ... TF8&psc=1

Port 1, can do up to 65w. My cameras are on the other ports.
by JoshKelly
Thu Nov 05, 2020 8:16 am
Forum: General and Unclassified
Topic: WE826-T2 POE
Replies: 4
Views: 1347

Re: WE826-T2 POE

Thank you so much! Just ordered one. Not sure what the antenna is actually rated in gain, definitely not 22dbi. There was somewhat of an improvement in my speeds from the antennas that came with the router. It is also just mounted in a closet right now pointed at a window. I'll be putting it on a po...
by JoshKelly
Thu Nov 05, 2020 5:56 am
Forum: General and Unclassified
Topic: WE826-T2 POE
Replies: 4
Views: 1347

WE826-T2 POE

Do I need one of these to power my WE826-T2 with POE: https://www.amazon.com/dp/B01HMNJHII/ref=cm_sw_em_r_mt_dp_qz-OFbEFV6ZF5 Or does it natively support POE? My current equipment is: https://www.amazon.com/dp/B07F8Z2RQL/ref=cm_sw_em_r_mt_dp_hC-OFb8RYR54Z?_encoding=UTF8&psc=1 https://www.amazon....
by JoshKelly
Fri Jul 10, 2020 6:46 am
Forum: Modems - Questions and Support
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 38018

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

The router will need roughly 60W-70W of available power for itself on poe. 72W POe injectors are what I use, the The Wireless Haven store on facebook has them. The cat20 modem will FOR SURE work better, it will just be overkill for your router. A cat 6 modem is great, a cat 12, like the Quectel EM1...
by JoshKelly
Thu Jul 09, 2020 5:50 am
Forum: Modems - Questions and Support
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 38018

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

^ This would be preferred. I also wanted to clarify, it's up to the tower to allow CA over a band mix and band-locking might disable that compatibility. If band-locking is being done because other bands don't provide the expected throughput, it's unlikely the tower will allow CA to occur unless a p...
by JoshKelly
Wed Jul 08, 2020 8:08 am
Forum: Modems - Questions and Support
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 38018

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

Ah I see now. Those flat panels are definitely going to have to come down the road, I am going to need about 100' (x2 50') of that LMR400 cable. So that setup is going to end up costing me $250+. Maybe I can get a set of those paddle antennas for now and just lock band 30 for a little improvement. I...
by JoshKelly
Wed Jul 08, 2020 7:44 am
Forum: Modems - Questions and Support
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 38018

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

Hello, Those flat panel antennas are very good for sure if you want those down the road. To band lock to band 30 and 12 this is the command below. AT+QCFG="band",0,20000800 Now remember this will not make 30 your primary just will make the those two the only two available to it. If you de...
by JoshKelly
Wed Jul 08, 2020 7:05 am
Forum: Modems - Questions and Support
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 38018

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

Hello everyone I am back with another question on CA. We have recently purchased a new house and moved, I am having some troubles with the CA at the new house. Basically the best band for me to connect to is 30, it results in 20-23mb down at a 58% signal connection. When it CA's with band 12 I get 2...
by JoshKelly
Tue Jun 16, 2020 8:31 am
Forum: Questions and Support
Topic: Good Antenna Options?
Replies: 2
Views: 2114

Good Antenna Options?

Hey all, I am in need of some recommendations on an antenna setup, just purchased a new home and it is heavily wooded with tall 15 year old pines. Would like to keep the antenna and cable under $150 if possible, I am predicting about 25' of cable needed. I currently have this modem: https://www.amaz...
by JoshKelly
Tue Mar 17, 2020 5:34 pm
Forum: Modems - Questions and Support
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 38018

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

JimHelms wrote: Tue Mar 17, 2020 5:08 pm Why not just use THIS
Thank you so much, I kept reading mention of a calculator but was having a hard time finding it. This is great!

Josh
by JoshKelly
Tue Mar 17, 2020 5:01 pm
Forum: Modems - Questions and Support
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 38018

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

Enter the following AT commands, and write down your original band values before changing anything. AT+QNWINFO < Current band in use AT+QCFG=”Band” < Current bands config AT+CSQ < Check signal strength To configure single LTE bands or combinations, use the following AT Commands: Band# - AT Command ...
by JoshKelly
Fri Feb 28, 2020 7:41 pm
Forum: General and Unclassified
Topic: WE-826-T2 IPV6 Disable
Replies: 3
Views: 4822

Re: WE-826-T2 IPV6 Disable

@billA thank you so much, I will follow that first tutorial :).

Any idea if att throttles their unlimited tablet access. I have one of their unlimited plus phone plans and I added the unlimited tablet access on top of that plan.
by JoshKelly
Fri Feb 28, 2020 4:11 pm
Forum: General and Unclassified
Topic: WE-826-T2 IPV6 Disable
Replies: 3
Views: 4822

WE-826-T2 IPV6 Disable

Hey guys where are the settings to disable IPV6 on this router? I am running an ATT unlimited data tablet plan with my phone service. I think maybe the IPV6 could be reducing my speeds. I am getting 50 down on my phone but only 15 on the router modem setup. Hardware: WE-826-T2 Quectel EP06-A AC68U r...
by JoshKelly
Thu Feb 27, 2020 6:33 am
Forum: Modems - Questions and Support
Topic: EP06-A
Replies: 1
Views: 3223

EP06-A

Removed by OP

Go to advanced search