Search found 12 matches

by jhend
Fri Oct 02, 2020 5:22 pm
Forum: Misc Modem Cards and Dongles
Topic: Lm960 new build
Replies: 5
Views: 2672

Re: Lm960 new build

@OregonLTE is correct. The Telit command for band selection is AT#BND=<GSM band>[,<UMTS band>[,<LTE band>]] And the chipset is Qualcomm, so standard Qualcomm LTE bandmask values apply. The Telit manual doesn't give an example of its use, so I'm not sure if you can just use eg: AT#BND=,,2000000000000...
by jhend
Fri Oct 02, 2020 2:43 am
Forum: Misc Modem Cards and Dongles
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 145654

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

AT+QENG="neighbourcell" It needs to be run several times, and over a period of time. the contents can change dramatically, even in a fixed location (depending on whether the modem is thinking of switching bands). You'll need practice interpreting the result. Bands don't show directly in th...
by jhend
Fri Oct 02, 2020 1:34 am
Forum: Misc Modem Cards and Dongles
Topic: Lm960 new build
Replies: 5
Views: 2672

Re: Lm960 new build

Sierra modems use a Qualcomm chipset. The L860 uses an Intel chipset, and many things "under the hood" are very different.

Oops, my mistake. I've been working on my Fibocom L860 too long. The LM960 is a Telit modem, so the commands I gave before this edit won't work.
by jhend
Wed Sep 30, 2020 8:39 pm
Forum: OPEN | UNCLASSIFIED
Topic: Looking for Paid Support
Replies: 5
Views: 4055

Re: Looking for Paid Support

Ancient memories are coming back.

If the EC25-AF is in MBIM mode then OpenWRT may have a problem with roaming. Please see: https://forums.whirlpool.net.au/thread/ ... p=72#r1425
by jhend
Wed Sep 30, 2020 7:54 pm
Forum: OPEN | UNCLASSIFIED
Topic: Looking for Paid Support
Replies: 5
Views: 4055

Re: Looking for Paid Support

I have a Hologram SIM. It's specifically for IoT. That's 3GPP access technology types 8 (LTE Cat M1) and 9 (LTE Cat NB1). The EC25-AF supports neither of these. That's not to say the Hologram SIM won't work with access technology 7 (normal LTE). It may or may not, depending on the provider the Holog...
by jhend
Wed Sep 30, 2020 5:25 pm
Forum: Misc Modem Cards and Dongles
Topic: EM20g GPS
Replies: 4
Views: 2348

Re: EM20g GPS

More on this:

What does the command AT+QCFG="gpsdrx" return on the EM20-G?

If supported, this command determines whether GPS shares the diversity antenna.
by jhend
Tue Sep 29, 2020 3:43 am
Forum: Misc Modem Cards and Dongles
Topic: EM20g GPS
Replies: 4
Views: 2348

Re: EM20g GPS

You can set the GPS receiver to activate automatically on modem start with the AT command: AT+QGPSCFG="autogps",1 Restart it to activate obviously. Then you can read your position at any time with: AT+QGPSLOC=2 This gives your location in decimal degrees. Use zero or one instead of two in ...
by jhend
Thu Jun 25, 2020 5:00 pm
Forum: Quectel Modems
Topic: AT+CNUM for Quectel EC25
Replies: 7
Views: 7680

Re: AT+CNUM for Quectel EC25

I am trying to find the number associated with my sim card in a Mikrotik SXT with a EC25-AF Modem. When I run AT+CNUM it returns "OK" but no number. Any ideas? Most likely the SIM doesn't have the number written on it. In interactions with the provider, the modem uses the IMSI from the SI...
by jhend
Thu Jun 11, 2020 1:41 am
Forum: General and Unclassified
Topic: New ZBT WG1608 5G-ready router + GoldenOrb firmware
Replies: 218
Views: 152579

Re: New ZBT 5G-ready router WG1608

BillA wrote: Wed May 27, 2020 1:11 am Great news!! GoldenOrb firmware is now available for the WG1608
https://www.ofmodemsandmen.com/upload/
There's a newer version with improved Fibocom FM150 support available for testing:

http://ofmodemsandmen.com/upload/WG1608-GO2020-06-10.zip
by jhend
Wed Mar 18, 2020 2:46 am
Forum: Misc Modem Cards and Dongles
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 145654

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

For Linux users, I wrote a little shell script to display LTE band values. #!/bin/sh # printf "%s%20s\n" "Band L-bandmask-1" "L-bandmask-2" LBAND=1 BBAND=1 while [ $LBAND -le 48 ] do printf "%-6s%016X\n" "B$LBAND" "$BBAND" LBAND=$(( $LBAND ...
by jhend
Wed Mar 18, 2020 2:33 am
Forum: Misc Modem Cards and Dongles
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 145654

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

What would be the hex code for bands 14, 30, & 66 or for 4, 14, 30 & 66? I am have a hard time finding the value for band 30 right now I am returning: +QCFG: "band",0x260,0x2000000003300185a,0x0 Currently it default connects to band 2 and 15 If it ever connect to 30 or 66 my speed...
by jhend
Sun Mar 15, 2020 3:25 pm
Forum: Misc Modem Cards and Dongles
Topic: Quectel EP06-A AT commands for carrier aggregation bandlock?
Replies: 33
Views: 145654

Re: Quectel EP06-A AT commands for carrier aggregation bandlock?

BillA wrote: Wed Feb 19, 2020 12:05 pm
All bands for the EP06-E specifically:
AT+QCFG="band",8d0,7e00000000000000000000000000000000000000000000ff000001a0880800d5,0
That should read:

AT+QCFG="band",8d0,1a1880800d5,0

Go to advanced search