Wireless Joint

I tried a WE1026-5G which uses the same 2.4Ghz chip as the WE826 and found the wifi signal was somewhat weaker than my Asus RT-AC68U using factory firmware. However, the download speeds I got from both were about the same. I also looked at a Xiaomi Mini which uses the same MT7620 chip and the signal...

What is the date on the firmware you are using?

If I know that I can see which build was used and see if there is something wrong with the Wifi driver.

There have been reports of poor wifi using this chip set but I need to test and see what is happening myself using similar hardware.

There is a new image for the WG3526 now available using OpenWrt 18.06.

http://www.ofmodemsandmen.com/upload/wg3526-GO2018-08-08.zip

With luck this may have the fixes to cure the DHCP problems.

I have created an image for this using the very latest OpenWrt release, 18.06, and hopefully they have sorted out any issues.

http://www.ofmodemsandmen.com/upload/we3526-GO2018-08-08.zip

This has the very latest ROOter available and, with luck, is what you need.

You need to set the channel on the 5Ghz Wifi to make it associate. Also, if you change the Country back to 'World' you will have access to channels below 52. Channels above 52 have a 1 minute wait to check for radar before they are applied so you have to wait after changing the channel before it wor...

Those of you that have to use the Recovery Mode on a WE | WG router will have the pleasure of looking at a Chinese language screen. While it isn't hard to figure out what should happen, it is nice to know exactly what is being said here. I've translated the recovery page so you can see what is what....

Is there a WE3526 build from that? The one that's on the Ofmodemsandmen is from Dec 17 for the WE3526 Yes there is. http://www.ofmodemsandmen.com/upload/we3526-GO2018-07-15.zip This uses an older snapshot build that doesn't seem to have the problems later ones do but has the very latest ROOter scri...

I'll build you one using and older snapshot version from April that has been updated to the latest ROOter scripts.

There are issues with newer snapshot versions.

What firmware are you running?

Some snapshot builds seem to have a bug introduced that affects Wifi on ZBT routers.

There is a new ROOter build for the WE1326 based on the April snapshot build system but with the newest ROOter scripts in it.

http://www.ofmodemsandmen.com/upload/we1326-GO2018-07-15.zip

This should have working Wifi and the best modem support of any of the WE1326 images.