Search found 1159 matches
- Wed May 08, 2024 3:37 pm
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: I was able to access OPENLOCK and OPENMEP on MR6500 on 12.xx firmware.
- Replies: 5
- Views: 890
Re: I was able to access OPENLOCK and OPENMEP on MR6500 on 12.xx firmware.
The firmware flashes the software part of the UI/Linux OS, possibly some parts of the modem, but nothing related to enabling disabled bands on the 6500 and other models with only select bands enabled. I have not attempted to enable any bands as my primary goal was to be able to unlock the device, c...
- Fri May 03, 2024 5:27 am
- Forum: Firmware
- Topic: GoldenOrb NFT TTL settings
- Replies: 9
- Views: 2024
Re: GoldenOrb NFT TTL settings
Would you know of a GUI based NFTables editor package? That'd be helpful.
- Fri May 03, 2024 5:25 am
- Forum: GL.iNet
- Topic: GL-MT6000 + GL-M2
- Replies: 1
- Views: 318
Re: GL-MT6000 + GL-M2
Using the GL-MT6000 with a GL-M2 for cellular connection, but I don't see an options or icons for Signal Tower Lock, Historical Signal Record, or Band Masking. I've never had those options the whole time I've owned this router. Does anyone know if these options were ever present on this router firm...
- Wed May 01, 2024 5:48 pm
- Forum: Firmware
- Topic: GoldenOrb NFT TTL settings
- Replies: 9
- Views: 2024
Re: GoldenOrb NFT TTL settings
Well it's easy for you and me, but for the average user using SSH may be challenging.
Does the InvisaGig perform TTL internally, or it has to be done on the router?
- Tue Apr 30, 2024 3:38 pm
- Forum: Firmware
- Topic: GoldenOrb NFT TTL settings
- Replies: 9
- Views: 2024
Re: GoldenOrb NFT TTL settings
Best explanation I've seen: https://www.maroonmed.com/ttl-modification-for-outgoing-traffic-with-openwrt-22-03-and-firewall4/ F*ckin' ayy! They always have to mess with stuff which ain't broken. No more nice Custom Rules GUI, but silly command line config. :( Seriously, what were they thinking when...
- Tue Apr 30, 2024 5:56 am
- Forum: Firmware
- Topic: GoldenOrb NFT TTL settings
- Replies: 9
- Views: 2024
Re: GoldenOrb NFT TTL settings
Hi all. Couple of questions: 1. Will this set TTL for both IPv4 and IPv6? 2. Any concern with the iptable vs. nftables conflict message? Thanks! Normally you'd want to include the TTL rules for both IPv4+v6. The global rules below covers all interfaces, no need to specify each interface separately ...
- Mon Apr 29, 2024 4:54 pm
- Forum: ZBT Routers
- Topic: ZBT-Z2101AX bricked. No Recovery mod
- Replies: 1
- Views: 197
Re: ZBT-Z2101AX bricked. No Recovery mod
I flashed wrong firmware on my ZBT-Z2101AX and then bricked it. Tried to enter in recovery mod by holding reset button but didn't help. Is there other way to save the router? If you cannot enter flashing mode via the reset+power combination, then you could try flashing it using the TFTP or Command ...
- Thu Apr 25, 2024 3:41 pm
- Forum: VPN
- Topic: VPN vs Mobile Proxy for max Anonymity
- Replies: 4
- Views: 5434
Re: VPN vs Mobile Proxy for max Anonymity
This is an interesting concept, but I'd need a mobile proxy in the U.S. Proxies are faster than VPN's which double encrypt the data needlessly, once through the VPN server then over HTTPS, thus slowing it down and increasing latency. Nowadays 99% of websites are already HTTPS encrypted. Best of all...
- Tue Apr 23, 2024 1:33 pm
- Forum: Misc Modem Cards and Dongles
- Topic: X55 T99W175 modem
- Replies: 228
- Views: 79443
Re: X55 T99W175 modem
There's not a huge speed difference, sometimes you gotta use what works.
![Wink ;)](./images/smilies/icon_e_wink.gif)
- Mon Apr 22, 2024 6:00 pm
- Forum: Misc Modem Cards and Dongles
- Topic: X55 T99W175 modem
- Replies: 228
- Views: 79443
Re: X55 T99W175 modem
I've received the module and I am trying to get it working in OpenWRT and debian. Right now both of them show this error in dmesg: mhi-pci-generic 0000:06:10.0: MHI PCI device found: foxcom-sdx55 mhi-pci-generic 0000:06:10.0: BAR 0: assigned Imem 0xc1600000-0xc1600fff 64bit] mhi-pci-generic 0000:06...
- Fri Apr 19, 2024 7:40 pm
- Forum: Quectel Modems
- Topic: RM521F Firmware question
- Replies: 2
- Views: 862
Re: RM521F Firmware question
Whats the latest firmware for the RM521F-GL ?? Current: Quectel RM521F-GL Revision: RM521FGLEAR05A02M4G Thank you Looking at the specs of the RM521F, it seems to be a lower end 5G modem with only 900 Mbps down speeds. You're better off with the global version RM520N-GL (2,000 Mbps down speeds), or ...
- Wed Apr 17, 2024 4:33 pm
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: Has anyone setup a VPN internally?
- Replies: 6
- Views: 1773
Re: Has anyone setup a VPN internally?
Not sure about Netgear hostpot, but any GoldenOrb flashable router has regular VPN and Wire-Guard built in.
It's possible to add it to hotspots too, you may want to contact Rich Hathaway for that.
- Tue Apr 16, 2024 4:32 pm
- Forum: Misc Modem Cards and Dongles
- Topic: X55 T99W175 modem
- Replies: 228
- Views: 79443
Re: X55 T99W175 modem
Many thanks, got it and will be investingating it :) Try AT^PCIEMODE=0. Works without soldering on a different module of mine. It's mentioned by nok3 on 4pda. (I wasn't sure if it was fine to link so I didn't link it) Hi, in which brand version of the module did you tried the AT^PCIEMODE=0? I bough...
- Fri Apr 12, 2024 7:47 am
- Forum: Misc Modem Cards and Dongles
- Topic: X55 T99W175 modem
- Replies: 228
- Views: 79443
Re: X55 T99W175 modem
Reading the translated 4PDA thread, not sure if this is the right method... correct me if I'm wrong. https://4pda-to.translate.goog/forum/index.php?showtopic=994474&st=47960&_x_tr_sl=ru&_x_tr_tl=en&#entry129097775 That's right, on the front side of the module there are odd pins from...
- Fri Apr 12, 2024 6:21 am
- Forum: Misc Modem Cards and Dongles
- Topic: X55 T99W175 modem
- Replies: 228
- Views: 79443
Re: X55 T99W175 modem
Hello guys, to enable USB 2.0, I do not recommend soldering a jumper; it is better to solder a 10-15k resistor 0402. https://4pda.to/forum/index.php?showtopic=1086317&view=findpost&p=129461423 If you solder the jumper and poorly insulate pin 3, you can burn the modem. If you solder a resist...
- Thu Apr 11, 2024 5:33 am
- Forum: Quectel Modems
- Topic: Help needed in repairing our broken RM502Q-AE
- Replies: 8
- Views: 3296
Re: Help needed in repairing our broken RM502Q-AE
Post on the Quectel forum, and say that you have 10 pieces of RM502Q-AE modems to fix. Thanks, it might come to that!! I did get a reply from Quectel support but I am just getting the run-around. I suspect they are going to say they won't support me because I didn't buy from an "authorized&quo...
- Tue Apr 09, 2024 6:47 pm
- Forum: Inseego
- Topic: Inseego M2000 keeps dropping and wont broadcast its SSID
- Replies: 4
- Views: 516
Re: Inseego M2000 keeps dropping and wont broadcast its SSID
Hello and thank you for responding. So, I put the sim card in a phone and had service with no problem. I still have an issue of movie sites being restricted but I had that issue before adding the vpn. So, I guess it's a hardware issue. Is there a way for me to set it up to run through another route...
- Tue Apr 09, 2024 4:34 am
- Forum: Inseego
- Topic: Inseego M2000 keeps dropping and wont broadcast its SSID
- Replies: 4
- Views: 516
Re: Inseego M2000 keeps dropping and wont broadcast its SSID
I would pop the sim card into a phone to check if calls and internet are working properly. If it's working in a phone then it's the router, if it's flaky in a phone, then it's the service. That simple test would narrow down the issue quickly to a service or hardware issue. Also, I would not use a VP...
- Mon Apr 08, 2024 2:51 am
- Forum: Quectel Modems
- Topic: Help needed in repairing our broken RM502Q-AE
- Replies: 8
- Views: 3296
Re: Help needed in repairing our broken RM502Q-AE
I recently flashed my RM502q-ae with firehose -e and the modem became inoperable. It was stuck in FTM, factory test mode. Someone from Quectel sent me a new XQCN partition file. This apparently also deletes the calibrated data which you need to do RF testing. If you're not doing RF testing then sim...
- Mon Apr 01, 2024 6:43 am
- Forum: General and Unclassified
- Topic: [SOLVED!] Losing constant Internet connection on Mofi 4500 (and my mind)
- Replies: 171
- Views: 147167
Re: [SOLVED!] Losing constant Internet connection on Mofi 4500 (and my mind)
Hello, Apologies for resurrecting a thread from 2020, but The past few weeks i have begun to experience a similar issue to the OP. I have a MOFI4500-4GXeLTE-SIM7, and use a T-mobile SIM on my phone plan in the Router. Lately, over the past few weeks, My internet connection keeps dropping. Requiring...
- Sat Mar 30, 2024 4:52 pm
- Forum: Misc Modem Cards and Dongles
- Topic: X55 T99W175 modem
- Replies: 228
- Views: 79443
Re: X55 T99W175 modem
Specifically, click on the "Attached images" at the bottom of the post to see the mods. You have to cover the pin in pic#1, and bridge the pads in pic#2. https://4pda-to.translate.goog/forum/index.php?showtopic=994474&st=47960&_x_tr_sl=ru&_x_tr_tl=en&#entry129097775 You do...
- Thu Mar 28, 2024 3:56 pm
- Forum: Misc Modem Cards and Dongles
- Topic: X55 T99W175 modem
- Replies: 228
- Views: 79443
Re: X55 T99W175 modem
Finaly made progres on finding were settings had been moved to on my other modem so was wandering if they are hidden in another area as well... It's on a Russian site called 4PDA, the link below should Google translate the site automatically. https://4pda-to.translate.goog/forum/index.php?act=searc...
- Thu Mar 21, 2024 7:26 pm
- Forum: General and Unclassified
- Topic: Can LTE modems be repurposed as point to point wireless bridges?
- Replies: 3
- Views: 591
Re: Can LTE modems be repurposed as point to point wireless bridges?
I didn't think it'd be easy, and Mikrotik is one of the easiest brands to make a country code change on. But nothing I found on the cheap gets me to my BRS spectrum. Furthermore, if we don't build out and and use it, we lose it. So, since we're not rich, we were hoping to try use the spectrum for o...
- Thu Mar 21, 2024 1:54 am
- Forum: General and Unclassified
- Topic: Can LTE modems be repurposed as point to point wireless bridges?
- Replies: 3
- Views: 591
Re: Can LTE modems be repurposed as point to point wireless bridges?
Legalities aside, theoretically it should be possible by hacking the firmware. However, it would not be a trivial mod due to the firmware signatures. LTE modems are not designed to work in bridge mode without a base station. If you're looking to bridge two locations up to a hundred meters apart, you...
- Tue Mar 19, 2024 10:02 pm
- Forum: Questions and Support
- Topic: 4G LTE MiMo antenna issues
- Replies: 3
- Views: 970
Re: 4G LTE MiMo antenna issues
So, it's been an interesting journey, and I have to say I'm no more better off then I was before. And slightly more confused. As you can see the obvious doesn't always work out as expected in the real world. While MIMO should improve signal and speeds in most cases, sometimes it may be detrimental ...
- Tue Mar 19, 2024 9:35 pm
- Forum: Sierra Wireless Modems
- Topic: Sierra Wireless EM9191 EM9190 Firmware Update & IMEI Repair
- Replies: 12
- Views: 11430
Re: Sierra Wireless EM9191 EM9190 Firmware Update & IMEI Repair
Oh, I see the 5 commands, but doesn't it require a calculated code too, or am I missing something silly here? heh Not sure what calculated code you are referring to. It does not require the same unlock (and generate a code) technique as the earlier Sierra models. Ahh I did not know that, as I remem...
- Tue Mar 19, 2024 6:06 pm
- Forum: Sierra Wireless Modems
- Topic: Sierra Wireless EM9191 EM9190 Firmware Update & IMEI Repair
- Replies: 12
- Views: 11430
Re: Sierra Wireless EM9191 EM9190 Firmware Update & IMEI Repair
Do you need to send the authorization before those commands, or this will only restore the original imei? The authorization is included the first AT command. It joins 5 different AT commands into one. Oh, I see the 5 commands, but doesn't it require a calculated code too, or am I missing something ...
- Tue Mar 19, 2024 3:09 pm
- Forum: Tutorials
- Topic: Orbi 5G (NBR750, NBK752) How-To / Megathread
- Replies: 87
- Views: 43720
Re: Orbi 5G (NBR750, NBK752) How-To / Megathread
Looking for the correct command to disable LTE for troubleshooting. Thanxs if it has a qualcomm cpu (I think it does x55) just use offline-D mode you can get to it by sending the dm command 290100 you may need to send the spc first if it does not respond send the spc like this 41 30 30 30 30 30 30 ...
- Tue Mar 19, 2024 2:59 pm
- Forum: Sierra Wireless Modems
- Topic: Sierra Wireless EM9191 EM9190 Firmware Update & IMEI Repair
- Replies: 12
- Views: 11430
- Tue Mar 19, 2024 6:13 am
- Forum: Quectel Modems
- Topic: Rm520n-gl with visible
- Replies: 2
- Views: 2508
Re: Rm520n-gl with visible
Or atleast help with at commands I'm having trouble with it and so far no matter what sim I use in the usb enclosure it says sim missing. Since your sim is working in both a phone and EM160R-GL, likely your modem is in the wrong mode or defective. Try flashing it using the latest Quectel firmware, ...
- Tue Mar 19, 2024 5:46 am
- Forum: Speed Tests
- Topic: What speedtest sites are you using?
- Replies: 2
- Views: 5500
Re: What speedtest sites are you using?
Hello guys, just wanted to ask for good speedtest sites. Perhaps you can recommend some. My regular speed tests are: https://www.bing.com/search?q=speed-test https://www.google.com/search?q=speed-test And the two below lets you test both IPv4 and IPv6 speeds separately which sometimes may be differ...
- Mon Mar 18, 2024 5:29 am
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: MR6150-100NAS Firmware
- Replies: 4
- Views: 656
Re: MR6150-100NAS Firmware
ZzzzShinzzzZ wrote: ↑Mon Mar 18, 2024 1:57 am Mine stops me updating, it still got stuck in fw 10.x . What should I do in order to update it? Thanks.
Try setting the following, then factory reset your router, have a working sim in, and wait a day to auto-update.
dx -c fota.WUAutoCheck 1
dx -c fota.WUAutoDownload 1
dx -c fota.WUAutoUpdate 1
- Sat Mar 16, 2024 10:26 pm
- Forum: ZBT Routers
- Topic: wg1608/quec em12 - randomly powers down
- Replies: 16
- Views: 2306
Re: wg1608/quec em12 - randomly powers down
Update: Seems like the issue is resolved. Here is what I did: Thanks again for all the help and advice fellas, will update if anything changes. Cheers. I'm glad that it seems to be working, at least for now. For random modem/router issues it's always a good idea to start with a fresh baseline/facto...
- Wed Mar 13, 2024 8:34 pm
- Forum: WiFiX Routers
- Topic: NEXP1GO with EM160R-GL Not Activating
- Replies: 1
- Views: 1168
Re: NEXP1GO with EM160R-GL Not Activating
Try activating the SIM in the iPad first or an iPhone, then move it to the router.
- Wed Mar 13, 2024 8:11 pm
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: MR6150-100NAS Firmware
- Replies: 4
- Views: 656
Re: MR6150-100NAS Firmware
I just picked up one of these used with firmware NTGX65_12.01.31.00. I was able to telnet into the device and run AT commands which allowed me to fix the IMEI and enable development mode. As soon as I added a sim the the device it began the update process which I was able to interrupt by remove the...
- Wed Mar 13, 2024 8:06 pm
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: Netgear Mr6500 fail to broastcast wifi evenif broastcast ssid enabled already.
- Replies: 1
- Views: 255
Re: Netgear Mr6500 fail to broastcast wifi evenif broastcast ssid enabled already.
Has anyone encountered this issue on their Nighthawk hotspot before? It’s an unlocked MR6500, works fine via Ethernet and USB tethering, but will not broadcast WiFi it has 💤 beside the WiFi symbol. Is there a command I can run to try to fix it? I’ve done a hard reset already and no luck. Try a fact...
- Tue Mar 12, 2024 10:53 pm
- Forum: MoFi Routers
- Topic: What is the pinout for the Molex 4-pin ATX Power Plug? Mofi5500
- Replies: 1
- Views: 986
Re: What is the pinout for the Molex 4-pin ATX Power Plug? Mofi5500
Use an Ohm meter to easily find the ground then the rest.
- Sun Mar 10, 2024 4:18 am
- Forum: General and Unclassified
- Topic: Laptop tmobile tethering.
- Replies: 2
- Views: 3278
Re: Laptop tmobile tethering.
So I'm using 2 different phones for Hotspot. 1 is visible and the other is verizon post paid. For a couple years I've been doing the phone > windows 10 laptop via wifi > tp-link wireless router via shared ethernet port to put the router online. Both phones have the same Hotspot details so all we ha...
- Thu Mar 07, 2024 6:38 pm
- Forum: Quectel Modems
- Topic: Quectel RM502Q-AE
- Replies: 7
- Views: 755
Re: Quectel RM502Q-AE
Here is a speed test I captured this morning on my MoFi2000 unit when I swapped the SIM from the Quectel unit. The SIM appears good and working. I'll give those AT commands a try. I appreciate the help! Try swapping the modems too and see what happens in both units. The best way of diagnosing an is...
- Wed Mar 06, 2024 9:10 pm
- Forum: Quectel Modems
- Topic: Quectel RM502Q-AE
- Replies: 7
- Views: 755
Re: Quectel RM502Q-AE
I pulled the modem and reseated it back to the board. Powered everything back up and the modem shows as connected however the Provider states it is Connecting as shown in the illustration below. Doesnt' resolve past this point. The modem/router is finding bands that it scans in my area but somethin...
- Tue Mar 05, 2024 8:34 pm
- Forum: Quectel Modems
- Topic: Quectel RM502Q-AE
- Replies: 7
- Views: 755
Re: Quectel RM502Q-AE
Some diag steps I would try....
Re-seat the modem and tighten the screws.
Re-flash the modem.
Re-flash the router.
Try another spare/borrowed modem.
If all else fails, smoke a Wireless Joint to go to Wireless Heaven. lol
Re-seat the modem and tighten the screws.
Re-flash the modem.
Re-flash the router.
Try another spare/borrowed modem.
If all else fails, smoke a Wireless Joint to go to Wireless Heaven. lol
- Tue Feb 27, 2024 9:53 pm
- Forum: InvisaGig 5g
- Topic: Router Locking Up
- Replies: 23
- Views: 2977
Re: Router Locking Up
For the WAN interface the IG is connected to, you may also need to uncheck the option for blocking private networks since the 192.168.225.1 is in the RFC 1918 space. Your post prompted me to read the RFC 1918/Private Network Addressing Wiki, which made me realize that the private address range 10.x...
- Mon Feb 26, 2024 6:17 pm
- Forum: WiFiX Routers
- Topic: NEX1PGO can't save band locking
- Replies: 2
- Views: 442
Re: NEX1PGO can't save band locking
I have a NEX1PGO / WG3526-P router with a Sierra Wireless EM7565 modem. Purchased in August 2021. I'm pretty sure this worked with a previous version of firmware. Try the latest GoldenOrb firmware from here. ZBT-WG3526-GO2024-02-22-AB21.zip http://aturnofthenut.com/autobuilds/ZBT-WG3526-GO2024-02-2...
- Fri Feb 23, 2024 7:24 am
- Forum: Orbi
- Topic: NBR750 not recognizing modem/bad flash
- Replies: 2
- Views: 1815
Re: NBR750 not recognizing modem/bad flash
Attempted to upgrade fw to R13 on NBR750 without taking the modem out. I moved the fw using SCP to /tmp/ in the router and used the QFirehose present in the router to flash, resulted in a bad flash :evil: I can still ssh into the router but the modem/sim is no longer recognized. I can't send any AT...
- Thu Feb 22, 2024 6:36 pm
- Forum: TTL Settings - Throttling, Tethering and Hotspot Usage
- Topic: AT&T unlimited hotspot
- Replies: 3
- Views: 1289
Re: AT&T unlimited hotspot
Is AT&T still a viable option for unlimited hotspot using TTL/IMEI mods? Any direction on which plan to purchase? I'm on VZ right now and it's pretty good but I do get throttled after what must be 50GB. The problem with VZ and that the network in my area is saturated and I get 10Mbps on 5G. On ...
- Thu Feb 22, 2024 5:36 pm
- Forum: Sierra Wireless Modems
- Topic: MC7455 - stuck in loop
- Replies: 9
- Views: 1029
Re: MC7455 - stuck in loop
Understood. You want to self build, support, and warrant. :) Pretty much what the cost of the InvisaGig is. They have rj45 modem sleds on alibaba that you drop your own 5G modem into, or buy theirs, and use AT commands or opensource code to give it a web interface for sending at commands. Yea, it's...
- Wed Feb 21, 2024 9:10 pm
- Forum: Nighthawks MR1100 - MR5200 (M1...M5...)
- Topic: All firmware for Netgear devices can be found here
- Replies: 33
- Views: 2857
Re: All firmware for Netgear devices can be found here
I tried a few times to download some of the firmware, but the only option I could see on that site to download was "Download Everything". Every time I tried that, all I got was "Download failed. Try later". Apparently you must download and install Yandex's downloader, and (I pre...
- Wed Feb 21, 2024 5:25 pm
- Forum: VPN
- Topic: Unleashing VPN Power on Routers: Your Ultimate Forum for Router-Based VPN Setup
- Replies: 2
- Views: 2117
Re: Unleashing VPN Power on Routers: Your Ultimate Forum for Router-Based VPN Setup
A problem with the current router based VPN client is that it pipes through all sites through the VPN, and only allows certain sites to be "excluded". This method slows down most sites and increases latency unnecessarily, except for the excluded ones. It would be great if the router's VPN ...
- Wed Feb 21, 2024 3:01 pm
- Forum: VPN
- Topic: Wireguard VPN Bypass
- Replies: 3
- Views: 3799
Re: Wireguard VPN Bypass
To bypass a VPN on a specific local IP address while using WireGuard, you can follow these general steps: Identify Local IP Address: Determine the local IP address you want to bypass the VPN for. Edit WireGuard Configuration: Locate your WireGuard configuration file on your device. Exclude Local IP...
- Wed Feb 21, 2024 12:48 am
- Forum: WiFiX Routers
- Topic: NEXQ6GO looses connection between lan/wifi and internet.
- Replies: 3
- Views: 1556
Re: NEXQ6GO looses connection between lan/wifi and internet.
I get moire or less the same problem. Did you solve it? I'm looking to install a newer firmware, did you do that? If so, where can I find one? First you need to determine the actual cause for the connection drop, which can be caused by several factors. 1. Failing router hardware 2. Failing modem ha...
- Tue Feb 20, 2024 5:27 pm
- Forum: VPN
- Topic: Wireguard VPN Bypass
- Replies: 3
- Views: 3799
Re: Wireguard VPN Bypass
That should be it for a local IP, just test it to make sure it's actually excluded.
- Tue Feb 20, 2024 5:23 pm
- Forum: VPN
- Topic: OpenVPN (ProtonVPN) Running But Not Functioning
- Replies: 4
- Views: 7178
Re: OpenVPN (ProtonVPN) Running But Not Functioning
In case anyone else ends up at this thread, I was facing what I think is the same issue. I was trying to get expresspvn working in client mode on: Hostname WiFiX Model WE1326v5 Architecture MediaTek MT7621 ver:1 eco:3 Firmware Version GoldenOrb_2019-04-09 Kernel Version 4.14.63 I was able to use th...
- Tue Feb 20, 2024 4:05 pm
- Forum: Internet Service Providers
- Topic: StarLink satellite internet service by SpaceX
- Replies: 24
- Views: 15007
Re: StarLink satellite internet service by SpaceX
Starlink just raised their prices to $549 to deposit holders from $499, and $599 for new orders, with monthly fees going up to $110/mo. Hmmmmmmm....... It’s called inflation His cost are raising so he is passing the cost onto the user. Jet Fuel.png Yet cellular plan prices stayed pretty much the sa...
- Tue Feb 20, 2024 4:35 am
- Forum: Misc Modem Cards and Dongles
- Topic: WE826-T2 No Modem Present SOLVED (Fibocom 860-GL)
- Replies: 24
- Views: 9694
Re: WE826-T2 No Modem Present SOLVED (Fibocom 860-GL)
I installed the WE826-WD firmware and that made no change to the SIM Missing error. Well, if the sim was working before in the router without any changes, then it's unlikely caused by the firmware. As far as I know, the WE826-T2 is basically the same hardware as the WE826-WD, so try reflashing it w...
- Mon Feb 19, 2024 3:15 pm
- Forum: Misc Modem Cards and Dongles
- Topic: WE826-T2 No Modem Present SOLVED (Fibocom 860-GL)
- Replies: 24
- Views: 9694
Re: WE826-T2 No Modem Present SOLVED (Fibocom 860-GL)
Ok, I didn't want to put the new SIM in there until I had the IMEI changed so I was using an old Verizon SIM that no longer has service. Would not having service make the SIM show up as "Missing"? Here's what I am seeing: https://1drv.ms/i/s!AjcwMUKGyqifgZ0rQFuehZITcys7Sw?e=Uk9quC Regardl...
- Sun Feb 18, 2024 7:31 am
- Forum: Misc Modem Cards and Dongles
- Topic: WE826-T2 No Modem Present SOLVED (Fibocom 860-GL)
- Replies: 24
- Views: 9694
Re: WE826-T2 No Modem Present SOLVED (Fibocom 860-GL)
I would test the sim card in a phone first if you haven't done so already.
In rare cases SIM cards can go bad.
- Sun Feb 18, 2024 7:05 am
- Forum: TTL Settings - Throttling, Tethering and Hotspot Usage
- Topic: T-MOBILE MNVO TTL MANGLING WITH LUCI
- Replies: 10
- Views: 5262
Re: T-MOBILE MNVO TTL MANGLING WITH LUCI
Hi everyone! I am new to this website. I read all posts related to my problem and I still didn't find a solution. T-mobile throttles video streaming to 480p on their essentials plan, magenta plan and on their MVNO plans such as Simple mobile, Mint mobile, and many more. I current DON'T have hotspot...
- Sat Feb 17, 2024 4:33 pm
- Forum: ZBT Routers
- Topic: wg1608/quec em12 - randomly powers down
- Replies: 16
- Views: 2306
Re: wg1608/quec em12 - randomly powers down
Good advice @BillA . I've not flashed the em12 before since it's been problem free. I will see if I can do it with qfirehose and/or try to find m2 sled I bought years back. Unfortunately I don't have any other router besides the 1608 nor do I have another module. Looks like most options of buying o...
- Fri Feb 16, 2024 4:36 pm
- Forum: ZBT Routers
- Topic: wg1608/quec em12 - randomly powers down
- Replies: 16
- Views: 2306
Re: wg1608/quec em12 - randomly powers down
Yes ~2 years ago I removed the lid of the 1608 and put a finned cpu heatsink on the em12g's metal shield held in place with white thermal compound. It reduced the temperature by some but I doubt its nesecary in the environment I have it in. I do not think the resetting is due to temperature, I moni...
- Wed Aug 18, 2021 7:23 pm
- Forum: Internet Service Providers
- Topic: LTE Provider options for Home Internet
- Replies: 29
- Views: 9545
Re: LTE Provider options for Home Internet
Honestly, I try to avoid any providers that route their traffic through different/additional portals than the main providers APN. This is why visible ping times suck. Granted i've not tried them to see if you can avoid their APN or not, but initially liked the idea of a carrier (US Mobile) having a...
- Wed Aug 18, 2021 12:04 am
- Forum: General and Unclassified
- Topic: New ZBT WG1608 5G-ready router + GoldenOrb firmware
- Replies: 218
- Views: 178302
Re: WG1608/WG3526 2.4GHz and 5GHz WiFi Working with 19.07 Snapshot
I tried this firmware, but there seemed to be an issue with my network devices connecting through the router, even though the router shows its connected to LTE network. Any ideas on what may be the issue? Any help is appreciated. Thanks! First I would test the sim card in a phone to make sure the w...
- Tue Aug 17, 2021 7:50 pm
- Forum: Internet Service Providers
- Topic: Can PCsForPeople / MobileBeacon Sims be used in other Devices?
- Replies: 5
- Views: 2450
Re: Can PCsForPeople / MobileBeacon Sims be used in other Devices?
MosquitoGoose wrote: ↑Tue Aug 17, 2021 5:06 pm If so what are the limitations? Any help would be greatly appreciated. I'd like to use it in a Orbi LBR20. Thanks.
You may want to start with the Orbi LBR20 How-To / Megathread.
https://wirelessjoint.com/viewtopic.php?f=21&t=1876
- Tue Aug 17, 2021 7:47 pm
- Forum: General and Unclassified
- Topic: New ZBT WG1608 5G-ready router + GoldenOrb firmware
- Replies: 218
- Views: 178302
Re: WG1608/WG3526 2.4GHz and 5GHz WiFi Working with 19.07 Snapshot
Can someone confirm this is this valid as of today? Thanks The latest firmware should have WiFi-5G working. This is the latest as of today: ZBT-WG1608-GO2021-07-31.zip http://www.aturnofthenut.com/upload/ZBT-WG1608-GO2021-07-31.zip Here's the folder for all the latest firmwares: http://www.aturnoft...
- Tue Aug 17, 2021 7:53 am
- Forum: Misc Modem Cards and Dongles
- Topic: T-Mobile Hotspot Masking
- Replies: 8
- Views: 4785
Re: T-Mobile Hotspot Masking
Currently pretty much all phone plans have some kind of hotspot limit. If you don't want to get a full blown router to bypass the limit, you could go with an inexpensive GL-Inet MT300N mini travel router smaller than a pack of cigarettes. https://www.amazon.com/GL-iNET-GL-MT300N-V2-Repeater-300Mbps-...
- Tue Aug 17, 2021 7:30 am
- Forum: Internet Service Providers
- Topic: LTE Provider options for Home Internet
- Replies: 29
- Views: 9545
Re: LTE Provider options for Home Internet
ok thanks will try these out. Is it possible my phone changed? Been using the same phone all this time. A Samsung S8+. Just one day this started happening. Yes, it's possible that a firmware/app upgrade on your phone has a new hotspot/firewall implementation which is not passing the modified TTL/DN...
- Tue Aug 17, 2021 6:58 am
- Forum: Misc Modem Cards and Dongles
- Topic: Modem Upgrade Choices
- Replies: 3
- Views: 1738
Re: Modem Upgrade Choices
Thanks, i've implemented your suggestion and will see how that works out going forward. Just got my LM960A18 in today with some new antennas/cables. Excited to see what the new modem and 4x4 mimo might yield. Another solution to keep the mobile connection alive constantly is by streaming a web page...
- Tue Aug 17, 2021 6:41 am
- Forum: Internet Service Providers
- Topic: LTE Provider options for Home Internet
- Replies: 29
- Views: 9545
Re: LTE Provider options for Home Internet
So none of your devices work all the time when you are tethering? Is anyone have issues with this with the sim card inside a modem router? The tethering issue with certain phones is likely caused by the implementation of the hotspot app/firewall in the phone. Instead of the stock hotspot/tethering ...
- Mon Aug 16, 2021 8:49 am
- Forum: Internet Service Providers
- Topic: AT&T Post Pay Tablet plan Good Tablets to get LTE Service
- Replies: 14
- Views: 10167
Re: AT&T Post Pay Tablet plan Good Tablets to get LTE Service
Hello, Are you saying that it has 4G Lte in both the ipad and Nighthawk? If so that is to be expected. If the device you used to get the card doesn't have 5G the card will not be provisioned with it. Honestly don't even know if 5G is part of the deal with unlimited ipad/tablet plans. This is the re...
- Mon Aug 16, 2021 6:29 am
- Forum: VPN
- Topic: Wireguard server on PiOS working, Android connects, but WG3526 won't
- Replies: 1
- Views: 2428
Re: Wireguard server on PiOS working, Android connects, but WG3526 won't
Ok, so after about 12 hours staight working on this, I'm about ready to throw in the towel. Supposedly the latest GoldenOrb firmware has WireGuard built in without having to install extra packages. Here's the latest WG3526 firmware as of today. ZBT-WG3526-GO2021-07-19.zip http://www.aturnofthenut.c...
- Mon Aug 16, 2021 6:21 am
- Forum: ZBT Routers
- Topic: ZBT WG1602 and ROOTER (open WRT) ?
- Replies: 4
- Views: 4570
Re: ZBT WG1602 and ROOTER (open WRT) ?
There's a GoldenOrb firmware available specifically for the WG1602, here's the latest as of today.
ZBT-WG1602-GO2021-07-20.zip
http://www.aturnofthenut.com/upload/ZBT-WG1602-GO2021-07-20.zip
And here's the folder with all firmwares and versions.
http://www.aturnofthenut.com/upload/
ZBT-WG1602-GO2021-07-20.zip
http://www.aturnofthenut.com/upload/ZBT-WG1602-GO2021-07-20.zip
And here's the folder with all firmwares and versions.
http://www.aturnofthenut.com/upload/
- Mon Aug 16, 2021 5:45 am
- Forum: WiFiX Routers
- Topic: WiFiX NEXR5GO dual modem setup works
- Replies: 14
- Views: 6797
Re: WiFiX NEXR5GO dual modem setup works
Didneywhorl wrote: ↑Fri Feb 05, 2021 4:58 pm Meaning 2 modems each using half of the 4x4 MIMO antenna?
Might work. Might present noise. Not really sure. I should try sometime.
It would probably work, but you would have to play around with the antennas "pairs" to see which combination works best on two 2xMIMO modems.
- Mon Aug 16, 2021 1:52 am
- Forum: VPN
- Topic: Wireguard on ROOter?
- Replies: 69
- Views: 45195
- Sun Aug 15, 2021 1:11 pm
- Forum: VPN
- Topic: Wireguard on ROOter?
- Replies: 69
- Views: 45195
Re: Wireguard on ROOter?
I haven't got a change to run WireGuard on GoldenOrb/WiFix since it requires the installation of extra packages and some tweaking. However, I connected my WG3526's LAN-1 to the WAN port of a GL-Inet Slate (GL-AR750S) which has WireGuard built in, it works great pushing around 50Mbps fully encrypted....
- Sun Aug 15, 2021 12:30 pm
- Forum: WiFiX Routers
- Topic: NEXR5GO Router and EP06-A Modem
- Replies: 223
- Views: 65468
Re: NEXR5GO Router and EP06-A Modem
Now I am back to 5Dn and 3Up. Is there a way to specify what band I use? As I mentioned earlier, it's best to run the speeds test late at night after 11pm when the network is less congested. Those will be the highest speeds you'll get from your combination of modem, carrier, plan, and location. Dur...
- Sun Aug 15, 2021 2:33 am
- Forum: WiFiX Routers
- Topic: NEXR5GO Router and EP06-A Modem
- Replies: 223
- Views: 65468
Re: NEXR5GO Router and EP06-A Modem
Can I use the router to fine tune aiming the antenna? How would I do that? Assuming you have external antennas, try rotating them together in a full 360 degree circle at 45 degree increments (8 turns total), restart the router each time, wait about 5 minutes, then test the speed again. It's importa...