Wireless Joint

I'm glad it's working for you, but most people are unable to set up a separate VPN box. Hopefully in the future, mobile routers will have enough processing power to be able to run a VPN with minimal speed degradation. Yes, I think with wireguard this will be more feasible to run on a router. The se...

My bad. That ended up not working. I was able to set up a raspberry pi as a VPN router. I'm using Nord VPN Wireguard on the pi. It took about 3 days to get it working but it's working great. No difference in speed tests. Wireguard is definitely fast. And I'm not losing internet every hour.

I found this and applied the rules to my WE826 in the firewall settings. Rebooted and I'm not showing behind a proxy on https and my network is functioning correctly. Going to wait and see if it's just a fluke. If it stays up I'm going to install PiHole on my new rPi and enable DNSSEC through it. h...

I found this and applied the rules to my WE826 in the firewall settings. Rebooted and I'm not showing behind a proxy on https and my network is functioning correctly. Going to wait and see if it's just a fluke. If it stays up I'm going to install PiHole on my new rPi and enable DNSSEC through it. ht...

The workaround seems to be using a VPN. I'm trying to set one up on a raspberry pi

I'm trying to get Open vpn or wire guard to run on my WE826 since ATT is proxying traffic and blocking everything. I was able to configure open vpn and it starts but my IP stays the same so it looks like traffic is bypassing the vpn. Firmware Version GoldenOrb_2020-03-07 Kernel Version 4.14.167 Has ...

Update - MTU doesn't resolve this. TTL same thing. Have you tried setting it to IPV6 only? The ATT thread shows they aren't pushing IPV6 connections through the transparent proxy. Have you had any luck with trying to set it to IPV6? I can't get my modem to stick to that. That being said I haven't h...

Updated: Wifix The Wireless Haven Ping Test, while I'm sure it works, isn't a solution, waiting 10mins before it checks ping is way to long. A version in which this is shortened to like 5-10 seconds could help, but the 10min mark, you're already going into the router page and rebooting it yourself....

This worked for me on my WE826 running openwrt. I used the command line commands rather than uploading the opvpn file.

https://forums.torguard.net/index.php?/ ... vpn-setup/

gscheb wrote: ↑Fri Oct 23, 2020 10:03 am What AT&T plan is everyone having this issue on? Want to know been considering trying AT&T "Unlimited For iPad" or "Unlimited for Tablet" plan myself.

iPad post paid $20 plan

This doesn't seem limited to using AT&T as a home Internet service as I've changed my EM7565 IMEI to that of my iPad (I own both) and I'm still getting black-holed every 4ish hours. The options as I see them are 1) Setup a VPN on the router (will kill my bandwidth) 2) Switch to a local internet ...

I tried those commands yesterday. After the reset it didn't reconnect. I did a power cycle and the settings didn't stick. It was back to ipv4v6 and connected giving me an IPV4 address.

It's not a DNS issue. It's ATT black-holing your traffic with their transparent proxy. There's a big thread here (it sounds like IPV6 bypasses the proxy but I can't figure out how to force IPv6 with my EM7565/already tried a few commands). https://forums.att.com/conversations/other-phones-devices/at...

Thanks. Made sure there was only one APN and set it using the command you provided. I got this after resetting the modem from the AT-Terminal: Thu Oct 22 16:19:39 2020 : /dev/ttyUSB2 AT+CMGS=?;+CMGL=?;+CMGR=? ERROR Power rebooted the whole router and the command didn't stay after the power reboot. G...

Is there a way to display all of the APNs? I only set the APN from the Connection Profile under "Modem" in the LuCI interface.

Is there a way to force the EM7565 modem to use IPV6 only? Due to AT*T's fuckery with their transparent proxy I'm getting disconnected multiple times a day. Someone on the AT&T forums posted that using IPV6 bypasses the proxy. I can't figure out the commands to set this up on my modem. Not sure ...

Probably this issue
https://forums.att.com/conversations/ot ... 542c96b341

Can you run simple ping tests while its down? It seems ATT has been letting certain ports stop transmitting, like port 80 and 443. Apparently a silent proxy issue? Im not sure what it means. Apparently forcing the modem to change bands is a less downtime than full reboot. Here is a string of posts ...

These instructions worked for me. I SSH'd to the WE826 to copy/paste the commands

https://forums.torguard.net/index.php?/ ... vpn-setup/

Jim I very much appreciate your responses. Is your developer building these "modem manager" images? I'd like to message the creator of them if at all possible and find out what's required in building a similar image. With the packages available, it's not possible without much further cust...