Wireless Joint

I was getting an EM7455 ready by following the tutorial and issued an "at!rmareset=1" and a at!reset. The modem then came up in Low power mode because of a PRI firmware mismatch. After much trial and error, it seems to be out of low power mode. Now the modem is out of low power mode but I'...

I’ve been using a WE826-T2 plus an EM7455 modem with an AT&T plan for over 7 months with no problem. I’m setting up a friend with a similar setup and have run into a problem that has me stumped. When I use his AT&T sim in either device it will only connect to 3G and if I lock bands to “09” L...

Does anyone have any idea how to flash a WE826-T2 with a factory firmware entitled "Intelligent Router" to GoldenOrb/Rooter from the factory firmware? I've tried the factory upgrade option but I get an error indicating that the bin file is the wrong model. It must be some sort of factory d...

Anyone have a we826-t2 for sale?

Thanks

This is a new GoldenOrb WE826-T2 install and it's working flawlessly except for one thing, If I ever reboot the router it will not reconnect to the modem a MC7455. If I power cycle the Router it will reconnect.

If I reboot is there something I should be doing differently?

I’ve been educating myself on my MC7455 and AT commands and was wondering if there was an AT command to prevent it from choosing a particular band as the primary band but allow it to be used as a secondary band during aggregation? I’ve noticed that I get high bandwidth when the modem selects AT&...