will try that. also would you be able to provide me a full firmware dump of the T10 itself? I'm unsure about how to go about obtaining it.


Ok for this one I will.
This is a full dump of the firmware broken down to individual partitions for you with the spare and sums removed already.
If you ...

I enabled the ports then just erased sbl and it will be stuck in 9008 mode but fair warning if you do that you will need to
reload at least the sbl after sending a proper loader to it or it will never come out of 9008 mode and boot back up.
Or there is a testpoint for this one, one that goes to ...

I know this is an old device, I just got one, well a few of them so I had to tinker a bit.
it is a Qualcomm MDM9x07 device containing 15 basic partitions, nothing fancy here.


dev: size erasesize name
mtd0: 00140000 00020000 "sbl"
mtd1: 00140000 00020000 "mibib"
mtd2: 00c00000 00020000 "efs2"
mtd3 ...

Ok here it is I circled it red for you, or for 9008 via fastboot use fastboot erase sbl

Sure np, I hope you backed up sbl before you deleted it.