Wireless Joint

AT+QENG="neighbourcell" It needs to be run several times, and over a period of time. the contents can change dramatically, even in a fixed location (depending on whether the modem is thinking of switching bands). You'll need practice interpreting the result. Bands don't show directly in th...

Sierra modems use a Qualcomm chipset. The L860 uses an Intel chipset, and many things "under the hood" are very different.

Oops, my mistake. I've been working on my Fibocom L860 too long. The LM960 is a Telit modem, so the commands I gave before this edit won't work.

Hello! I've successfully setup an OpenMPTCProuter on an Intel-i3 based SBC with 8 Gigabit NIC's (industrial PC/router enclosure) I imported from China (the usual suspects). Pretty much everything went without a hitch, save attempting to find a VPS provider that could potentially provide a residentia...

October 2022 Update I loathe boilerplate legalese but it was brought to my attention that someone had copied this tutorial wholesale on another site with only a passing reference to a pseudonym of mine at the very end and no link to this page as the source. Thus, I feel I have to give notice at the...

makes me really appreciate that i got a quectel instead of a sierra modem

Great work. Another option if you don't want to be dependent on external DNS to keep the firmware from being updated is to add an entry for devcom.up.netgear.com to /etc/hosts. I confirmed that gives me back a "Service unreachable" when I attempt to update. echo "127.0.0.1 devcom.up.n...

Thanks for the help! Calling it a success for now.

If others land here with a WE826GO running a Quectel EP06-A modem trying to get this combination running for the first time, the first part of this thread did the trick for me. That would be the second post instructing how to clear the APNs then run in MBIM mode. After the modem hard reboot command ...

If you don't know, maps use true north, and your compass uses magnetic.
They are off generally about 12-13 degrees for most of us.
Useful if you are trying to aim an antenna.

Pop in your zip code and check yours:

https://www.ngdc.noaa.gov/geomag/calcul ... eclination

I posted in another thread on this, but its related here as well, details as follows... I have tested both the Telit LM960 and LM960A18. The regular 960 worked fine on Tmo and ATT, got 4xCA on both carriers. My issue with the 960 was no band 71. Hence, getting the LM960A18.... Works fine on ATT, tho...

I have tested both the Telit LM960 and LM960A18. The regular 960 worked fine on Tmo and ATT, got 4xCA on both carriers. My issue with the 960 was no band 71. Hence, getting the LM960A18.... Works fine on ATT, though I got info this modem will throttle after 100GB of use on ATT. I haven't run into it...

The $20 Postpaid plan IS available, you DO NOT need a phone account. The reps in the stores won't be able to see it on their plan list, they have to SEARCH BY PLAN USING IMEI. If they do that and you give them a tablet that can use their network, it'll show up, $20 tablet only plan. I'm using it rig...

I was able to get help from jheld on the Rooter OpenWRT forum over at https://forums.whirlpool.net.au/thread/ ... #r67837810.

So far the 7411 looks like its CA TMO band 71 on DL, which is a first for a router I tested. I'm seeing a DL performance boost of about 40% during peak times. I'm still learning the Sierra AT commands, I'm more familiar with the Quectel's. Output as follows... ______________________________ at!gstat...

I recently ran into this thread and finally dig some digging since it was driving me crazy. There are likely two issues going on here, and while I don't know the answer to the true question "why is this happening" I was able to fix the latter of "why doesn't this recover". Warnin...

I've been using a WE826-T2 with Nomad's Wholesale Pink plan (T-Mobile). With external antennas, I have a decent D/L of 20Mbps and u/L of 5Mbps. I received my T-Mobile Home Internet yesterday and without external antennas, I have one signal bar at my location. with a D/L speed of 2-4Mbps and a u/L of...

Just want to throw this out there as I spent the last few hours trying to figure out why I couldn't get the following setup to work: WE826GO EM7565 Visible Wireless SIM VSBLINTERNET as APN No TTL, 65, 117, etc. AT!GSTATUS? keywords: EMM state: Deregistered PS state: Not attached If you know the SIM ...

I put in earlier #start TTL rules iptables -t mangle -I POSTROUTING -j TTL --ttl-set 117 iptables -t mangle -I PREROUTING -j TTL --ttl-set 117 ip6tables -t mangle -A POSTROUTING -o wwan0 -j HL --hl-set 117 ip6tables -t mangle -I PREROUTING -i wwan0 -j HL --hl-set 117 #end TTL rules#startTTL iptables...

Congrats, you now have a very overpriced 826 unit with a sierra 7455

You may want to take a look at MWAN load balancing "full blown" guide;-)
https://openwrt.org/docs/guide-user/net ... iwan/mwan3

Or better yet, true channel bonding/load balancing OpenMPTCProuter.
https://wirelessjoint.com/viewtopic.php?f=21&t=1078

I think I figured it out, in Telit lm960 software user guide it states "Suppose that the 4G Technology is present on the air. Use the command AT+WS46=28 to force the module in 4G mode." In the AT command reference it is reported with a very technical terminology and I missed it. So for LTE...

We need more info :) What plan are you using on Tmobile? It's always best to eliminate SIM/carrier/plan issues: Did you register the SIM to another device first to make sure the SIM is active and the plan passes data? Or did you get a full on hotspot plan and register the EP06 as the device on your...

agreed sell it and buy yourself TWO new better quality routers for the same price

I'm not going to be able to help much because I'm a total novice and learning as I go, but I'm putting together a RBM33G and a Sierra EM7455 right now. (I've also ordered an EP06-A, but it's on a slow boat from China and won't be here for a few more weeks.) Here are my thoughts so far: I updated the...

Please don't take this as nitpicking, just would like to point out the correct expression of your down/up speeds. If you put down 100+MBs, it means MegaBytes/sec (upper case B=Bytes, lover case b=bits), which would equal to 800Mbps (Megabits/sec), and I'm pretty sure you're getting nowhere near tha...

i have now tried the sprint apn's. Same error. I am pretty confident that I need to use the t-mobile apn as the sim is t-mobile and the iPhone 6 it came out of was configured to use the t-mobile apn. the plan is sprint, but I have been migrated to the t-mobile network because sprint is so bad at my...

Thanks for the responses. Now that i think about it, i really don't have the luxury to tinker around a bunch to get the RPi setup going since my girlfriend works from home. It just needs to work. That said, i'm thinking about going with the WE1326 and remove my Netgear R7000 from the mix. Would the...

Commscope create a white paper on Beamforming. Just in case you need some bed time reading... https://www.commscope.com/globalassets/digizuite/542044-Beamformer-Explained-WP-114491-EN.pdf?utm_medium=paid-display&utm_source=thirdpartymedia&utm_campaign=NAR-OWN-FierceWirelessInLineWebAd-Beamfo...

First post on this forum. It is a wealth of information! I'm in a rural area in NW Ark. and have wireline internet (ADSL2+) from AT&T. All cables are buried, from the C.O. to my house, so no worry about lines down from trees, etc. Speed is a very consistent 16mbps Dn. with unlimited data use. I ...

Hello Billa, I am also transitioning from the MOFI 4500 to something better. I am currently on T-Mobile also and after reading a few of your comments, I went with a setup I seen you recommended to others. I just received my EP06-A and WG3526-P. I am currently using dual Yogi antennas with my tower a...

I run two routers, with different carriers/towers. I have both run into a USG Pro4 with load balancing enabled. It does not do WAN bonding, but it does load balance across the two routers/modems and it also fails over to one if the other one experiences an outage. There are WAN bonding setups you ca...

It is rather complicated but the short answer is no it will not double your speed or double your bandwidth (which is just a fancy way of saying D/L, U/L speed). If you have a max data allotment than having two accounts would double your total data amount. There are ways to divide the work of transfe...

what was your original bandwidth vs with the VPN on? I just tried speedtest.net several times with and without the VPN and it's hard to notice any difference. I said 75% above but it's better than that. I usually get between 20 and 40 Mbps. I'm in Houston using T-Mobile with a Magenta Unlimited 55 ...

The below is the solution to this issue with dd-wrt and wireguard. New Update + Final Solution: So with KeepSolid, it's $99 for a lifetime, then I spend $12.50 a month for a private IP, everything works now, gaming/P2P/VOIP/etc. This is the recommended route I suggest you go with for any VPN provid...

Ok quick follow up I was able to flash it with the gui bootloader screen after doing some html work. Thanks for all the tips and suggestion everyone!

Devices send their IMEI when registering to the network. On some you can "repair" the IMEI, on others you can't. The thing I wanted to mention to you is that Verizon is very picky (to use a polite word) about the devices. I believe it depends on the MVNO, but for most you have to have a &q...

EC/IO The EC/IO is a measure of the quality/cleanliness of the signal from the tower to the modem and indicates the signal-to noise ratio (the ratio of the received/good energy to the interference/bad energy). It is measured in decibels (dB). In a perfect world, where there is no true interference, ...

https://youtu.be/5PMzQumIv0w Quectel EM160R-GL is an LTE Advanced Category 16 module. Adopting the 3GPP Release 14 technology, it delivers speed of 1.0 Gbps downlink and 150 Mbps uplink peak data rates, and is designed in M.2 form factor. EM160R-GL is designed for global market and nearly covers all...

I seems to be working today. Not sure if anything changed. I will keep an eye on it. Now to see if I can do some fine tuning.

Thanks,

Cricket does NOT have a speed limit of 8 Mbps anymore. Hasn't for some time . That is only with their $50 unlimited plan. Not the $60 unlimited More. I use cricket and get the Same exact speeds I get with ATT. Actually most times my cricket speeds are better. Also, get something with a Quectel Modem...

Torrents aren't illegal them self, you know. I use them for sharing self created content.

I also need the ports opened for a game as well.

Hello all, I just found this long thread about the wide band parabolic grid. I work at the design and fabrication shop and lab where it originated and can answer any questions. How can I help?

Removed modem from router and reset router to defaults. Did some basic settings changes then powered off and reinstalled the modem. Modem up and connected with no further issues.

Hey RockyinNM. Thanks for the great info! Are you still using the Verizon postpiad tablet plan? I plan on doing the same thing but another member said his plan was locked for doing this. http://wirelessjoint.com/viewtopic.php?p=13975#p13975 Yes, I still have the plan, as I have stated before, it is...

So I told my friend to send me a few pictures up close at different angles to pass along to you, unfortunately my friend (a self proclaimed photographer btw :lol: ) sent me 5 pictures looking right down the barrel each further away from the port than the last. Go figure. I will get some better image...

Didneywhorl wrote: ↑Wed Nov 11, 2020 8:43 pm Who restock?

thewirelesshaven sells the Q under the NEXQ6GO name, with their own firmware. Its in stock.

Thanks for the correction. I need to get another one so this is good timing!

Alright, switched from verizon f/w to generic AT!ENTERCND="A710" AT!IMPREF="GENERIC" and solved emm state issues, reflashed router a couple times, and ive got internets again!! I hope this thread of me fumbling around learning might help some other noob someday. Thanks all Untitl...

Set Connection Modes

QMI/PPP/Default
AT+QCFG="usbnet",0

ECM
AT+QCFG="usbnet",1

MBIM
AT+QCFG="usbnet",2

Setting up security on my NEXQ6GO and found this info that might be of interest to the mofi users out there.
https://www.criticalstart.com/critical- ... i-routers/

Thanks for taking a look I'll monitor the thread

I'm actually looking into stocking these, mostly for remote camera systems, but also to see if they can be upgraded. Won a pallet action and there were a few of these (J and K models). Played around with the J model (at&t) little bit. Bands 2, 4 and if I recall 12. Sold one to a fleamarket vend...

Going to give this a try in the AM and report back. Thank you for tackling that so quickly.

The parabolic mimo grid at The Wireless Haven has the most gain on those bands. Your signal is already decent enough, though, so a cheaper mimo panel antenna should suffice.

Problem resolved, I had to change DNS server settings on PC.

I'm running the MOFI4500-4GXeLTE V2. After doing a factory reset of the router, I applied firmware 4.3.2-std this past Monday morning (November 16th). My router has not disconnected since, with the exception of when I was doing a band scanner test and at the completion of that operation I had lost i...

Received my WG1608 today with a Sierra 7411. Could not get it to work with GoldenOrb 06-10 Firmware. Could not get it to properly use wifi using GoldenOrb 06-14 Firmware. Works perfectly using the recently uploaded GoldenOrb 11-17 Firmware... Thanks to lurking in the forums for a couple of weeks, th...

Well I solved the issue.. SIM card upside down. I checked the three CME errors and noticed they are all related to the SIM card and also saw this post from yesterday which is an identical router throwing identical errors. To clarify, the SIM card contacts (gold side) need to be facing down. Thank yo...

Looks like the TM modem is a Cat-12 .... Humm not bad.

Maybe a PoE setup would help. Put the modem outside on a pole in an enclosure

Add me to the list of folks interested in the MHF-SW23 pigtails ...

Since I don't have a modem capable of 4x4 yet, I'll experiment with a 2x2 modem
Thanks

Just wanted to say thanks! I had a similar issue and I updated the firmware that was released on 11/20 and still didn't work until I did a hard reset and now I'm back up and running. I'm getting about 100 down and 20 up. I live in nyc and this setup will eventually live on my roof which has clear li...

A very helpful store is www.thewirelesshaven.com !

I just use the postpaid unlimited elite consumer plan. Since I already had that for my actual phones, adding a line only runs me ~$35/mo. Nxtgenphone or broadband for the APN. Ttl changes aren't necessary for AT&T, but 116 is what my phone reports when doing a ping directly from a terminal inter...

Capt.Black1979 The more information you can give the group the more help you will receive. What type of phone do you have? How is the signal and data speeds? What is your budget for hardware? What is you budget for monthly data cost? Do you like building things or buy a turnkey solution? Is this for...

Your quest needs more details to get help
Is this a permanent install?
How much data do you want?
Is ATT the strongest signal in every port?
You may want a setup that can handle two SIMs.

Also interested!

The drone I'm getting (Holy Stone HS720E) has altimeter readings on the controller display, so in my use case described above, I wouldn't need a tape measure. If I were to try to find an optimal spot over a large area such as yours, I'd get a bunch of marker flags, and number them 1 to whatever many...

What you're going to find is that Golden Orb ("GO") and therefore The Wireless Haven firmware based on it are much more user friendly firmware(s) that has many things self-configured and therefore you don't need a degree is rocket science to utilize it, and the opposite end of the spectrum...

The reset did not work, the firmware re-flash did.

Captain, Here is a bit more to chew on... A router with dual SIM allows two active cell contracts as an attempt to avoid coverage holes. Yes, ethernet cable would be the best performing connection from router to Xbox. To get the best data rate, it is all about the antennas (the modem helps too). Sin...

After the restore the EP06 isn't recognized; shows no modem present under Network Status. The only place it comes up is under Debug Information below the AT command box. Whenever I directly install the EM20 it is recognized however I get the same three CME errors 3/100/14. Also this is a different E...

Have you tried the process outlined in https://wirelessjoint.com/viewtopic.php?t=5 ? BillA also has an extensive writeup to flashing via Bootloader at https://wirelessjoint.com/viewtopic.php?p=6007#p6007 Just went through this process with a WG3526. Trying to upload the build through the "upgra...

Just a follow up to my original question. I confirm this modem requires that PCIE_DIS signal is connected to 1.8v and also the VBUS_SENSE needs to be high, or it will not work in USB mode. OTOH my unit has an outdated firmware and Sierra refuses to give me a more recent one. I am willing to pay a fi...

Ok, so I got this EM9190 modem from aliexpress only to discover it defaults to PCIe mode and in order to have it switch to USB3 mode, a specific pin on the M.2 connector needs to be tied to a 1.8 volt signal. What options do I have to make this modem visible by either ROOter or my windows machine? C...

The latest update says the special antenna pigtails from IPEX will take 6-8 weeks to be made and shipped. Mid to late January is what is being quoted. This is a brand new product line and is going to take much longer than other items to get manufactured and procured. And I'm OK with that. As long a...

Search found more than 1359 matches