Search found more than 1358 matches

Return

by Jflex113
Tue Apr 17, 2018 10:52 am
Jump to forum
Jump to topic

Re: I'm currently using.....

You're not the only one. I've seen a few other that this is happening to as well unfortunately. Give Calyx a go, they have always been good.
by WahroongaFarm
Sat May 26, 2018 11:52 pm
Jump to forum
Jump to topic

Re: WG3526-P Router w/Sierra MC7455 Modem inside a DM25X19 Antenna

... my modem details page doesn't include the SINR or modem temp. The next ROOter release will display 'temperature' and modem 'connection protocol' at 'General Information' where temperature AT commands are known. see https://forums.whirlpool.net.au/forum-replies.cfm?t=2689577&r=56486343#r5648...
by ironscuba
Sun Dec 22, 2019 9:32 am
Jump to forum
Jump to topic

Re: WG3526-P Router w/Sierra MC7455 Modem inside a DM25X19 Antenna

Awesome build and tutorial!

Has anyone built anything similar for 700Mhz range? That seems to be my main frequency around here. I love the build and could use the empty box and add antennas externally. Just thinking the Cat6 is the way to go in my situation.

Thanks!
by 417linux
Fri Jan 10, 2020 9:01 pm
Jump to forum
Jump to topic

Re: Airmaster 4000D Not pulling in tower signal on verified band 41

These steps worked great! After manually plugging in all the info it instantly connected and I was able to pull in a full bar signal. This saved so much time. Thanks for posting such a good walk through! If you'd like pm me your paypal address, and I'll buy u a beer! Thanks again!
by stcabay1
Wed Jan 08, 2020 8:03 pm
Jump to forum
Jump to topic

Re: Airmaster 4000D Not pulling in tower signal on verified band 41

I had similar issues with my Airmaster 4000D when using it at my house. Eventually I got it working everywhere except for near my house. Was really odd, but with some setting changes I was finally able to get it going at home and it has been rock solid since. If I didn't change all of these settings...
by Richtow8
Sun Jan 12, 2020 4:50 am
Jump to forum
Jump to topic

Re: Modem NOT identified

Hold on... I'm still waiting for a DIM to arrive. I'll post the end results. The local Verizon has none and the supply is so far away that we are getting one expressed in. Free though!
by terryjett
Mon Jan 13, 2020 1:19 pm
Jump to forum
Jump to topic

Re: New Padlocked AT@T Tower

Let me get this straight: you want to cut the lock off of privately owned equipment and turn on the power to it? I guarantee you they placed a lock on it and it has a purpose. I recommend you call the number to the AT&T NOC printed on box and tell them your plans beforehand:) Bet they will find ...
by BillA
Tue Jan 14, 2020 10:48 pm
Jump to forum
Jump to topic

Re: Sierra Wireless EM7511 Aggregation Issue

silverwing wrote: Tue Jan 14, 2020 10:29 pm Got it back on the 4G by doing"

Good job, just leave it like that, don't mess around with locking bands, and let the modem's firmware do the scanning. It's programmed so that it constantly searches out the best channels/CA (unless you want to of course).
by silverwing
Tue Jan 14, 2020 10:29 pm
Jump to forum
Jump to topic

Re: Sierra Wireless EM7511 Aggregation Issue

Got it back on the 4G by doing" AT!ENTERCND="A710" AT!IMPREF="GENERIC" AT!RESET ___________________________________________ AT!GSTATUS? !GSTATUS: Current Time: 159 Temperature: 39 Reset Counter: 1 Mode: ONLINE System mode: LTE PS state: Attached LTE band: B2 LTE bw: 10 MHz L...
by gscheb
Wed Jan 15, 2020 12:18 pm
Jump to forum
Jump to topic

Re: NetGear NightHawk M1 Inside Antenna Ports

Well aware of the risks that it could ruin it. It is a used unlocked one from ebay. Learned when it comes to the LTE game have to be willing to loose money and time. There is no definite answers to nothing. If it does work don't care if it is ugly. Will end up in an enclosure or the attic anyway bei...
by gscheb
Wed Jan 15, 2020 12:46 pm
Jump to forum
Jump to topic

Re: NetGear NightHawk M1 Inside Antenna Ports

Yes I think you are right about the overseas thing, read it too. I want to put this on the ports we use here in the US. Just to eliminate those terrible ts9 ports that cause me issues with connectivity. In my opinion this is the largest down fall of the Nighthawk M1.
by BillA
Wed Jan 15, 2020 10:51 am
Jump to forum
Jump to topic

Re: EM7455 set to qmi?

Unfortunately not. I ordered another module to see if results are similar. Were you able to fix it, and how did the new modem work out? The issue seems to be with Dell branded modems, which are obviously not meant to be used outside of a Dell laptop. While Reran Daniel's flashing script may work, i...
by gscheb
Wed Jan 15, 2020 2:50 pm
Jump to forum
Jump to topic

Re: NetGear NightHawk M1 Inside Antenna Ports

Looks like a all in one thing to me.
Nighthawk M1 Other side.PNG
Here is a Video of someone taking one apart if that helps.
Where this picture came from.
https://www.youtube.com/watch?v=X8NS_FLUwwQ
by JimHelms
Wed Jan 15, 2020 3:10 pm
Jump to forum
Jump to topic

Re: WE 826-GO / Sierra EM7565 CAT-12 and Visible

There are enough people who make this mistake of using the wrong AT Commands on the EM75XX modems, that I have been wanting to tutorial on the process. In fact, it is on my list which seems to grow by the day.
by BillA
Sun Jan 19, 2020 1:12 am
Jump to forum
Jump to topic

Re: Nighthawk MR1100 "Mobile Broadband Disconnected"

Nm, "closed system" I read somewhere people were editing the nighthawks with an app called dc unlocker or something A friend of mine has the DC Unlocker dongle, which can repair the imei and change bands in the Nighthawk, but NOT the TTL since that's not part of the modem's baseband, rath...
by BillA
Sun Jan 19, 2020 9:43 am
Jump to forum
Jump to topic

Re: External Antenna Band 13 MIMO?

Didneywhorl wrote: Sun Jan 19, 2020 9:36 am LoL, killin me Bill

Great, now we've got another forum member dying over here... at least I've survived. tsk-tsk
by ira.kirby
Tue Jan 21, 2020 3:44 pm
Jump to forum
Jump to topic

Re: Nighthawk MR1100 "Mobile Broadband Disconnected"

Good info everyone. I'll try each suggestion and update with my results. Thanks!
by jrp320
Thu Jan 23, 2020 5:06 pm
Jump to forum
Jump to topic

Re: Sierra Wireless Modems - Programming Carrier Bands

thanks i must have done something wrong the first timed i tried it. got it going now thanks again

peace
by ruralbee
Thu Jan 23, 2020 10:03 pm
Jump to forum
Jump to topic

Re: Frequent modem disconnects MC7455/WG3526

Thanks for the charts Jim. Very informative & surprising. The Y USB 3.0 cable arrived this afternoon. After I connected it, I haven't really had any noticeable drops. Interestingly, about 30 min after I hooked it up, Sprint took down the main tower we are on. The modem struggled for about an hou...
by swwifty
Fri Jan 24, 2020 9:15 am
Jump to forum
Jump to topic

Re: MIMO Setup Help

I dont believe that it matters which end is on top, so likely keep the weep holes facing down. I believe the the angles used are an attempt to match the plane of the carrier equipment of the tower your using. Common practice seems to be 45 degrees from vertical plane. One tilted "left", t...
by radec
Sat Jan 25, 2020 7:30 pm
Jump to forum
Jump to topic

Re: Are Sprint sim cards device locked?

If you have extra cash to burn, might as well upgrade to the latest 5G modems... (warning, prices are insane!) Quectel RM500Q 5G https://www.4gltemall.com/quectel-rm500q.html Telit FN980 5G https://www.4gltemall.com/telit-fn980.html Fibocom FG100 5G Intel chipset https://www.4gltemall.com/fibocom-f...
by BillA
Fri Jan 24, 2020 11:03 pm
Jump to forum
Jump to topic

Re: Are Sprint sim cards device locked?

yeah, I think the em12 was more in line with what I was thinking, but I know the EC25 (AF variant) has been mentioned with people only using FDD bands just like you said there, def an older cheaper module. If you have some extra cash to burn, might as well upgrade to the latest 5G modems... (warnin...
by SliverGT
Sat Jan 25, 2020 11:42 am
Jump to forum
Jump to topic

Re: My 4G setup/project

My build is fully operational and ready to mount outside close to the antennas. Just wanted to say thanks for your contribution here, not sure I would have attempted this without seeing someone else be successful with it.
IMG_4888.JPG
by BillA
Sat Jan 25, 2020 7:40 pm
Jump to forum
Jump to topic

Re: Are Sprint sim cards device locked?

Bill, you read my mind. LOL I'm in talks with Quectel right now for prices. :) I've never touched the Telits or Fibocoms .... yet Yeah mind-reading is one of my special talents. lol I use the Quectel EP06-A almost exclusively, it's a great value, has all the major US bands, and no disconnects.
by BillA
Sat Jan 25, 2020 8:48 pm
Jump to forum
Jump to topic

Re: MIMO Setup Help

Well, I'm always right, even when I'm wrong. ha-ha just kidding
So unless gravity reverses on Earth, the weep hole should always be facing down, to shed its tears while weeping. ;P
by WallyC
Tue Jan 28, 2020 11:27 am
Jump to forum
Jump to topic

Re: External Antenna Band 13 MIMO?

Just for giggles, did you try aiming in all 360 degrees, 10-20 degrees at a time, to see if you can capture any mystery towers? Its sometimes surprising. oh, I did. I tried a lot of weird angles, directions etc... I'm sure it probably isn't unique to this router, but I can log into it with my phone...
by BillA
Tue Jan 28, 2020 6:48 pm
Jump to forum
Jump to topic

Re: TTL for Verizon (tablet sim) hotspot detection

Thats super cool apextv, can you get him to join this forum and help people out, or is that just /subtlebrag? It's more of the latter. xD He's probably talking about Rich Hathaway, known about him from the old CDMA forum days (which is now dead anyway). He does some custom flashing work but all pri...
by Factor
Wed Jan 29, 2020 1:40 pm
Jump to forum
Jump to topic

Hello All

Hello All Really like the information found here. I am new to openwrt/GO and such. Not new to tech or linux. I just wanted to say hello and hope to have some good questions as I learn here. In general my interest is having a mobile cellular gateway. I want it to use normal ethernet wan, wifi "p...
by JimHelms
Thu Jan 30, 2020 3:26 pm
Jump to forum
Jump to topic

Re: Linksys Wrt32x

You can download GoldenOrb for the WRT32X HERE. It is a fairly new build and not listed on the last build list.
by SliverGT
Sat Feb 01, 2020 10:45 am
Jump to forum
Jump to topic

Re: My 4G setup/project

In order to use a 110v extension cord from my router it would need to go through an outside wall. through the crawlspace and through an inside wall. That would be an electrical code violation and not something I want to risk doing. It's possible to find an electrical circuit in the the crawlspace to...
by swwifty
Tue Feb 04, 2020 2:51 pm
Jump to forum
Jump to topic

Re: My 4G setup/project

Didneywhorl wrote: Sat Feb 01, 2020 2:29 pm The HAT version doesnt have a modem embedded like the shields previously. Its pretty new-ish.

https://sixfab.com/product/raspberry-pi ... cie-cards/
oh that's pretty slick, but a USB enclosure is still cheaper.

Granted if you're tight on space, that's not a bad idea.
by terryjett
Tue Feb 04, 2020 5:18 pm
Jump to forum
Jump to topic

Re: My 4G setup/project

Didneywhorl wrote: Sat Feb 01, 2020 2:29 pm The HAT version doesnt have a modem embedded like the shields previously. Its pretty new-ish.

https://sixfab.com/product/raspberry-pi ... cie-cards/
Wow-we-Wow, I like that! Have some older pies laying around but this renews my interest, thanks for sharing the link!
by audio
Wed Feb 05, 2020 11:06 am
Jump to forum
Jump to topic

Re: LTE modem with transparent bridging

Thanks Didneywharl for the response. That is totally fine for my purposes. I overcome that with dynamically updating DNS entries, so a dynamic public IP is fine.
by radec
Thu Feb 06, 2020 12:06 pm
Jump to forum
Jump to topic

Re: Are Sprint sim cards device locked?

Just a random update in case its useful to anyone. I've been successfully running the WE826-T2 with a EM06-A on Sprint for a couple weeks now. Its been great and stable. I get 25-30 Mbps down and 2-4 Mbps up on B25, sometimes higher but that is pretty average. I live in a fairly treed area, I think ...
by jolly
Tue Feb 11, 2020 8:12 pm
Jump to forum
Jump to topic

Re: EM12-G Carrier Aggregation AT&T

Might want to try loading up in the car, use a portable inverter or similar power source, or take it to another house/work, and test it on another tower. Ensure you have top signal. Also may want to drive right up to your tower with your rig and see if it changes. Testing if its signal strength iss...
by charlesrg
Sat Feb 22, 2020 8:16 pm
Jump to forum
Jump to topic

Re: Custom Routerboard with M.2 Slot

If I may... The WE826 and WG3526 will need a mpcie to m.2 adapter, which downgrades the usb3.0 capable speeds down to usb2.0. This will make your CAT20 modem a waste of money. The WE826 specifically only has base100 LAN ports and both the 3526 and 826 have sketchy quality wifi and typically work &q...
by silverfang22
Thu Mar 05, 2020 11:58 am
Jump to forum
Jump to topic

Re: Sprint Signal Improvement Connection

I stand corrected, there are external antenna connections, didn't realize they are behind the plastic plugs. I will look into an omni directional antenna to start and hope it improves my one bar.
by kylesfishin
Wed Mar 25, 2020 2:25 pm
Jump to forum
Jump to topic

Re: WG3526 and MC7455

Great. Hopefully I'll be good to go with Pageplus for a while then. Thanks!
by ChrisTork
Fri Apr 03, 2020 9:32 pm
Jump to forum
Jump to topic

Re: WE826 with MC7455 updated firmware

It's based on the goldenorb 19.07.2 rooter build packages. https://www.ofmodemsandmen.com/buildpkg.html

Correct, No mods other than fixing the loop. I did set default ttl and settings etc. As I got tired of having to set them up everytime I flashed.
by ChrisTork
Fri Apr 03, 2020 2:06 pm
Jump to forum
Jump to topic

WE826 with MC7455 updated firmware / wifi fixed

Thought I would just post this out there for people having issues with the WE826 WiFi always dropping out. Apparently in the openwrt versions < 19.07.2. There is a issue with the WiFi drivers that cause it to hang when high bandwidth devices are being used. This would require a hard reboot of the de...
by whpijack
Wed Apr 08, 2020 8:49 am
Jump to forum
Jump to topic

Re: Trying to decide on antennas

Thanks for the reply! So yesterday I did some scrounging through my parts boxes at home and the office and noticed what is probably impacting me a TON. My N to SMA adapter, on the SMA side, is missing the pin! I'm not sure when this happened but it definitely can't be a good thing! SMA.jpg I did fin...
by michaelh
Tue Apr 07, 2020 6:39 pm
Jump to forum
Jump to topic

Re: WiFiX WE826-T / EM12 / Error

I want to Thank you Didneywhorl. Purchased the WE826 GO and EM12.... everything current as delivered last weekend. Setup was easy..was online in less than 20 minutes. My signal has improved and my Download and Upload immensely( 2-7DL to 12-30DL) Today I thought would look at Gui and see whats going ...
by JimHelms
Thu Apr 09, 2020 8:16 am
Jump to forum
Jump to topic

USE OF AT COMMANDS

We are seeing more and more modems that are bricked by the improper use of AT Commands. Unless you understand exactly what the command does, and you are certain it is the proper command for the make and model of your modem, do not use it . A bricked modem will not be covered under warranty. I also w...
by gscheb
Sun Apr 12, 2020 2:18 pm
Jump to forum
Jump to topic

Re: Trying to decide on antennas

At my sister's house we used a fiberglass pole. Then used three wire ties to stabilize it.
Works good and since isn't metal lighting shouldn't be as big as a concern and extremely lighter. Went this route since she didn't have antenna tower.
IMG_20200412_151149236_HDR.jpg
by mtl26637
Sun Apr 12, 2020 4:27 pm
Jump to forum
Jump to topic

Re: Trying to decide on antennas

Might check around in rural areas for old American Tower Company 'Special Series' TV antennas. They were very popular before Satellite TV. I'd hate to know how many have been removed and tossed in the trash in the past 10-20 years since that era OTA signals were kinda a thing of the past. They come ...
by optymyze
Mon Apr 13, 2020 8:05 pm
Jump to forum
Jump to topic

Re: Better signal but horrible download speeds

Didneywhorl wrote: Sun Apr 12, 2020 8:53 pm Huge difference between using LMR100 and LMR400. HUGE. Which kind of 50 Ohm cables may be your crux. Pointing to a tower 3, or more, miles away is picky work. Read: Pain in the ass sometimes. :)
Yep! I'm pointing at one 14 miles away :lol:
by bnhf2
Tue Apr 14, 2020 5:41 pm
Jump to forum
Jump to topic

Re: WAN Bonding with ROOter and OpenMPTCProuter

And here's the follow-on post I did, about a month later, after moving to the x86 router box: If you missed my original post on this amazing upgrade to your ROOter setup (assuming you have at least two decent sources of Internet available), you might want to have a look at this post first whrl.pl/R...
by bnhf2
Tue Apr 14, 2020 5:25 pm
Jump to forum
Jump to topic

WAN Bonding with ROOter and OpenMPTCProuter

Here's another post I did earlier this year on the ROOter forum, which is now a bit difficult to find. I did this post in late January, and I've since moved from the Raspberry Pi 4B to a Qotom x86 (i3) industrial PC with 4x gigabit Ethernet ports, 2x USB3 and 2x USB2 ports. OpenMPTCProuter needs an...
by jonathan_winters
Wed Apr 15, 2020 10:12 am
Jump to forum
Jump to topic

Re: AirMaster 4000D No Connection in confirmed B41 area

Well this is interesting -- since I had to guess at a few things while I was setting up I just was going through and changing some settings, and switched PLMN back to Mobile, and BINGO it connected right away. So in this case, I just had to enter the ND&S info and that was it. Speeds are still p...
by jonathan_winters
Wed Apr 15, 2020 10:48 am
Jump to forum
Jump to topic

Re: AirMaster 4000D No Connection in confirmed B41 area

After moving the AirMaster outside and in the very general area of where it will be mounted, I can say that I'm very happy with the results:

Image

I still have more to adjust, but this will for sure do the trick!
by JimHelms
Wed Apr 15, 2020 12:19 pm
Jump to forum
Jump to topic

Re: AirMaster 4000D No Connection in confirmed B41 area

I use a Calyx SIM and have swapped devices. You just need the SIM info and phone number of the account, IE the SIM phone number. Lots of people do. Sometimes the Sprint rep acts dumb and refuses, sometimes they dont. Dont tell them your account is through a 3rd party reseller, tell them only what t...
by terryjett
Thu Apr 16, 2020 11:40 am
Jump to forum
Jump to topic

Re: Setting up my SIM for T-Mobile

Everyone I have ever heard of using t-mobile in router is: they get it working in phone first. Which means to me you have to activate the service in phone, meaning you can make calls and surf the net with phone. Then you setup router APN, TTL and insert SIM. You can also ask the folks over at The Wi...
by whpijack
Thu Apr 16, 2020 12:00 pm
Jump to forum
Jump to topic

Re: Trying to decide on antennas

I thought about the de-pri possibility. I wouldn't say it ONLY goes back up after a reboot. Last night I went to bed with it running poorly. I woke up and saw 25-30 down going to my daughter's new Xbox. Since the modem is on the roof I'm pretty sure nobody other than me knows how to reset it. :) UL ...
by terryjett
Thu Apr 16, 2020 1:36 pm
Jump to forum
Jump to topic

Re: AirMaster 4000D No Connection in confirmed B41 area

Didneywhorl wrote: Thu Apr 16, 2020 11:32 am ooops! Thank you for the correction!
No problem! The airmaster is little different all way around.
by jackstack
Thu Apr 16, 2020 2:08 pm
Jump to forum
Jump to topic

Re: PSA: AT&T Doing away with $35 iPad Unlimited.

What makes me mad as these mother fu :mrgreen: kers shut down these accounts 1 day after payment was made for the month and they knew what was going on, and they wait until the very worst time and then steal all this money from everyone. That's all I will say but, they will never get my money again.
by JimHelms
Thu Apr 16, 2020 4:44 pm
Jump to forum
Jump to topic

Re: New EM7511 + Rooter Setup Slow Speeds

As I mentioned previously, you want to see the RSRP stats with little difference between the RxM and the RxD: PCC RxM RSSI: -67 PCC RxM RSRP: -97 PCC RxD RSSI: -86 PCC RxD RSRP: -123 In other words, you want them to look like this: PCC RxM RSSI: -67 PCC RxM RSRP: -97 PCC RxD RSSI: -67 PCC RxD RSRP: ...
by JimHelms
Thu Apr 16, 2020 5:31 pm
Jump to forum
Jump to topic

Re: Setting up my SIM for T-Mobile

Since this forum is for Internet Service Providers, I will lock this topic and keep the information for reference.

Please continue the topic on the original post HERE.
by dkiaunis
Fri Apr 17, 2020 6:48 pm
Jump to forum
Jump to topic

Re: we1326 firmware issue

I got it to work!
I downloaded the wifix version of the firmware instead of goldenorb, and that seemed to work.

Glad that is figured out
by A.Bursell
Fri Apr 17, 2020 11:30 pm
Jump to forum
Jump to topic

Re: Router and Modem Firmware Upgrades

Thanks. Agreed - I read through the release notes and don't see anything earth shattering - just thinking there must have been some reason. But everything seems to be working great, so unless I see a reason to change, I'm going to leave it. Or, maybe upgrade the modems to the CAT18 they offer. Hmmm....
by dmc83
Tue Apr 21, 2020 12:42 am
Jump to forum
Jump to topic

Re: New to this stuff, have some questions

Alright, ill probably try the CBA850LP6 and a wifi router then. Hope I get some improvement. Was topping out at 2 Mbps down this evening =(
by Greenday1
Tue Apr 21, 2020 8:37 pm
Jump to forum
Jump to topic

Re: Help with Building a WE1026-5G with EM20-G

Thank you Jim! I know this one has been a pain. Didneywhorl & BillA wanted to also say Thank you to both of you for your input as well! I'll be switching gears to trying to maximize the hardware and throughput at this point so I'll be posting threads soon and hope I can leverage everyone's knowl...
by dmc83
Tue Apr 21, 2020 11:19 pm
Jump to forum
Jump to topic

Re: Any way to take advantage of 2 booster antennas?

Oh, I was assuming CA is dependent on having multiple antennas. So if I use the CBA850LP6 with my 2 antennas, the modem gives me the possibility of using CA if the tower allows it, and the 2 antennas allow for increased performance at all times whether or not CA is active? Now what if I am locked to...
by gscheb
Thu Apr 23, 2020 11:08 pm
Jump to forum
Jump to topic

Re: Will t-mobiles 20$ tablet plan work with mofi 4500?

I use TMobile but not the tablet plan. If you want the mofi setup but custom built here is a good deal on one that originally came from The Wireless Haven store.
https://www.ebay.com/itm/Wifix-WE826-go ... 4158641325
by Jordan2020
Fri Apr 24, 2020 5:56 pm
Jump to forum
Jump to topic

Re: PagePlus + Mofi - What am i missing?

You are all correct.

It was the APN. I set the APN to tracfone.vzwentp and TTL to 117 and it connected no problem.

Thank you so much guys. I feel like an idiot for not having noticed the apn setting as something you should change but i'd only read about the TTL.
by slacker
Fri Apr 24, 2020 1:19 pm
Jump to forum
Jump to topic

Re: Debugging SimpleMobile connection (APN?) on WG3526 / EP06-A

Thanks for the reply, I meant to update on this after contacting SM. Who was right? The newbie APN theory or BillA's roaming hypothesis? The correct APN for SimpleMobile is "simple" (without the quotes, all lower case). As far as I know, they don't block modems just because of a wrong APN,...
by LTEnewb
Sat Apr 25, 2020 12:49 pm
Jump to forum
Jump to topic

Re: Help Building a 5G router for TMobile

Thank you.

I ended up buying a SIM8200EA-M2 and Quectel RM500Q. I'll let everyone know what I'm able to figure out.
by jonathan_winters
Mon Apr 27, 2020 8:35 am
Jump to forum
Jump to topic

Re: AirMaster 4000D No Connection in confirmed B41 area

I wrote up this step-by-step walkthrough for a few friends who also jumped on the airmaster bandwagon. Hope it helps!

https://www.dropbox.com/s/2jglj9pplfaee ... o.txt?dl=0
by bamabuck20
Tue Apr 28, 2020 7:51 pm
Jump to forum
Jump to topic

Re: 1200mbps router

Thanks again.
by gscheb
Tue Apr 28, 2020 11:30 pm
Jump to forum
Jump to topic

Re: PSA: AT&T Doing away with $35 iPad Unlimited.

Hello hw1353, I put the sim directly into the router with the MC7455 and it activated immediately. Then used the messenger in the router to activate my account online and talk to them on the phone when I had issues. Customer service was the biggest issues. Took like 24 hours for the add on I needed ...
by conan785
Wed Apr 29, 2020 10:51 am
Jump to forum
Jump to topic

Re: mofi4500 w7455 updated to goldenorb from stock FW and speeds dropped

OK. tried a few different band combos. Wife threatened me with death if I didn't stop tinkering while she was trying to work..... reset back to band 00 and not I got CA on Band 4 and 13... tweaked my Antennas a bit and I think I am ust going to walk away. Thank you for all the assistance. I really a...
by shroudedninja
Thu Apr 30, 2020 12:38 pm
Jump to forum
Jump to topic

Re: PSA: AT&T Doing away with $35 iPad Unlimited.

It's been over a year since I was using Calyx. If I recall correctly, the towers are ~8 miles away, but it's complicated by the fact that my house is surrounded by trees (PNW). I was using MC7455 and WG3526 (later upgraded to Turris Omnia) with 2 largish omni antennas. I tried using some directional...
by srunyon1
Fri May 01, 2020 12:41 am
Jump to forum
Jump to topic

Re: MC7455 Lock on Cell Id?

found the adapter and ordered the EM12 thanks!!
by Slaunchdonkey
Tue May 05, 2020 7:02 pm
Jump to forum
Jump to topic

Re: WiFIX WE826-T Showing there is no sim card

Turns out the adpater I have for my sierra wireless card has a sim card slot on it. I put it in there and I believe it recognizes the card, however it isn't connecting to Verizon. Looking in the debug, it shows me this Tue May 5 19:01:02 2020 : /dev/ttyUSB2 AT+CFUN=1 +CME ERROR: operation not suppor...
by mr.busy
Wed May 06, 2020 5:14 pm
Jump to forum
Jump to topic

Re: Affordable Alternative to ATT iPad?

I have been testing with visible in a number of phones and devices (s9, pixel 3a, netgear mr1100, and gl.inet mifi with the ec25-af modem). My findings are that you can I get decent speeds on devices themselves, put packet response (ping times) are generally high (100ms +). It worked on all of the ...