Wireless Joint

Yes it works

Usually everything these days is remote echo. So turn off local echo as you're only practicing typing. As stated, the screen does not stay up if you are not connected. So we can only presume that you're connected but have a dead session. Try just AT & Enter. Try ^D. Does anything make a differen...

If you dont see what you type in putty type "ate" and press enter to turn echo on then you can see what you type

Try both force off.
Line editing buffers the characters until a line is collected.
If you ever do get a response, then you can fine tune.

try another model to see if it is just blocked on yours, tf devices are usually locked down fairly well

so before you open putty make sure the admin page will open (192.168.1.1) if it does try to log into putty 192.168.1.1 port 5510 if the cli opens then it is connected now type AT and press enter you should get OK in return if you dont then re-install putty and maybe try a diff version, or try the on...

Chaddosan wrote: ↑Sat Sep 23, 2023 1:48 am (I did receive a Floxif.H detection in the above file, which I cleaned - will that make any difference?)

that is a false positive, and no if you are getting a response then it is still working.
what device and firmware are you using?

OK so that device is the Tracfone variant it may be locked out of all MEP functions, but your 6110 should be working unless it is updated to or beyond 12.01.xx, if it is then it is prob already locked out also and would have to be repaired before it can work again. https://wirelessjoint.com/viewtopi...