Wireless Joint

Is the power light on solid or is it flashing red? According to Netgear, if it's flashing red continuously, the modem has a firmware fault or hardware problem. https://kb.netgear.com/24328/What-should-I-do-if-the-power-LED-on-my-Nighthawk-router-is-off-or-blinking If and only if you have the receipt...

Thanks for that. For those of us less knowledgeable, what is "integration status"?

Yeah, that's the same boat I'm in. That why I'm hoping someone will manage to do something with the info. I posted in another thread and the partition image files that exist.

The file did not have the needed components to be able to put together a recovery file, it needs to come from another working mr2100
If I get the needed files I will post a recovery file here to share with everyone for this one.

more info is needed for a proper answer such as, which part of the firmware, this devices firmware has 31 partitions some being mbn, some img, and some triple layered ubi, ( ubi over ubifs over mtd) but if you mean like a one click tool or something the answer is no, you have to dump then decompile ...

I have enough testers for the 6500, thank you to the testers, hopefully they will report back here with their findings soon.

Also, you have a typo:
/Etc you have capitalized, so that likely wouldn't be a valid path.... Just calling that out if you're going to try and share with others. No comment on the rest of it.

Ah, that did it! Thanks for that.

And a big thank you to HKM2030.