Wireless Joint

For those who want to enable 5G SA with n41 enabled on boot, here is a method I found that worked. Create a script file at: /opt/scripts/enable_5g_sa.sh and insert the following into it: #!/bin/sh echo -ne "at+qnwprefcfg=\"nr5g_disable_mode\",0\r\n" | microcom -X -t 1000 /dev/tty...

FYI, the flash has plenty of space so I upgraded modem firmware by sending the most recent file from Quectel over to /tmp via SCP and running QFirehose -f /tmp/firmwaredirectoryname And yes, after you update the modem firmware to the most recent Quectel branch you will get notices from Netgear that...

Looking for the correct command to disable LTE for troubleshooting. Thanxs The full AT command manual can be found here: https://www.quectel.com/wp-content/uploads/2021/05/Quectel_RG50xQRM5xxQ_Series_AT_Commands_Manual_V1.2.pdf I'm not sure in which context you wish to disable LTE so I've included ...

Looking for the correct command to disable LTE for troubleshooting. Thanxs if it has a qualcomm cpu (I think it does x55) just use offline-D mode you can get to it by sending the dm command 290100 you may need to send the spc first if it does not respond send the spc like this 41 30 30 30 30 30 30 ...