Search found 32 matches

Return

by Didneywhorl
Mon Aug 30, 2021 12:08 pm
Jump to forum
Jump to topic

Re: I have 2 Mofi 4500 SIM 7?

Hey Tuna8er, I would refrain from using configuration backups. I always recommend using fresh flashed firmware and resetting the details by hand. Even though the config was from a working problem free setup, it can still cause issues. Yay openWRT. I would do the firmware recovery and flash the golde...
by gscheb
Sun Aug 29, 2021 9:31 pm
Jump to forum
Jump to topic

Re: I have 2 Mofi 4500 SIM 7?

Tuna8er wrote: Sun Aug 29, 2021 9:01 pm Anyone have any suggestions?
https://wirelessjoint.com/viewtopic.php?f=12&t=5
by gscheb
Tue Aug 31, 2021 4:09 pm
Jump to forum
Jump to topic

Re: I have 2 Mofi 4500 SIM 7?

Hello, Had a issue in the past that Mofi firmware wouldn't work since was using the wrong protocol. Allot of time when you flash firmware will change your protocol.
https://wirelessjoint.com/viewtopic.php?t=554

These commands won't work with a SIM 7 set up.
by JimHelms
Mon Sep 16, 2019 7:09 am
Jump to forum
Jump to topic

Re: Mofi 4500 Module in MBIM Wrong Mode

The easiest method (without having to remove the modem and installing in a USB to Mini PCI-E adapter and reprogramming the modem) would be to reinstall GoldenOrb. Then, use the AT-Terminal to place the modem in QMI using the following commands: at!entercnd="A710" at!usbcomp=1,1,10d at!rese...
by gscheb
Mon Sep 16, 2019 6:59 am
Jump to forum
Jump to topic

Mofi 4500 Module in MBIM Wrong Mode

Hello, Would appreciate any possible help on this. Running a Mofi 4500 on T-mobile. Was having an issue with carrier aggregation on the mofi so wanted to try the gorlden orb and openwrt systems I read on here. So I flashed this unit to run on Golden orb with a file I found on this site. And had it r...
by gscheb
Mon Sep 16, 2019 8:01 am
Jump to forum
Jump to topic

Re: Mofi 4500 Module in MBIM Wrong Mode

Thank you so much for the quick reply. Will try that after the work day. I of course live in a rural area and have been learning to do this stuff for around a year or more. With Netgears Nighthawk m1 and LB1121 and the Mofi. In the beginning didn't know about Cat lte modems or carrier aggregation or...
by JimHelms
Mon Sep 16, 2019 6:31 pm
Jump to forum
Jump to topic

Re: Mofi 4500 Module in MBIM Wrong Mode

gscheb wrote: Mon Sep 16, 2019 6:01 pm Hello again,
Just wanted to say thanks again and that fixed my issue. It recognizes the card and is back up and running again.
Glad you are back up and running.
by gscheb
Mon Sep 16, 2019 6:01 pm
Jump to forum
Jump to topic

Re: Mofi 4500 Module in MBIM Wrong Mode

Hello again,
Just wanted to say thanks again and that fixed my issue. It recognizes the card and is back up and running again.
by Dr-BroadBand
Wed Sep 01, 2021 2:15 pm
Jump to forum
Jump to topic

Re: MOFI 4500 Timed out

May try to remove the modem and just try to get the router to work.
by gscheb
Wed Sep 01, 2021 2:30 pm
Jump to forum
Jump to topic

Re: MOFI 4500 Timed out

Just want to make sure you are putting in the right ip address after doing openwrt flash. It would change to be different than what Mofi is. Probably 192.168.1.1
by gscheb
Wed Sep 01, 2021 10:05 pm
Jump to forum
Jump to topic

Re: MOFI 4500 Timed out

OpenWrt did not work either. Anyone have suggestions? Don't know why but in the past when had issues loading firmware onto a WE826-T2 this firmware would work. Once had it on there could load what ever firmware I wanted. Always loaded it with the bootloader method that talked about earlier. Here is...
by gscheb
Wed Sep 01, 2021 11:48 pm
Jump to forum
Jump to topic

Re: MOFI 4500 Timed out

Does it allow to do the bootloader method? Are you ever choosing the firmware to be added or do you not get that far?
by gscheb
Thu Sep 02, 2021 6:13 am
Jump to forum
Jump to topic

Re: MOFI 4500 Timed out

Can you follow the boot loader method exactly? And use the ip address it says and forget about modi ip address.
by gscheb
Thu Sep 02, 2021 10:44 am
Jump to forum
Jump to topic

Re: MOFI 4500 Timed out

Tuna8er wrote: Wed Sep 01, 2021 11:00 pm I tried it again with that file, same thing. I am using the mofi recovery page on 192.168.10.7, and to get there the static IP of 192.168.10.7, subnet 255.255.255.0, gateway, 192.168.10.1
Did you try not starting with this above? Start out with what the boot loader says to do.
by Didneywhorl
Thu Sep 09, 2021 8:38 pm
Jump to forum
Jump to topic

Re: I just received a MTK7621...

What does the router/routers board look like? MTK7621 is a processor chip that these routers use, not really the brand/make/model of router.
by Didneywhorl
Fri Sep 10, 2021 11:52 am
Jump to forum
Jump to topic

Re: I just received a MTK7621...

If using dual modems, make sure you have them both in MBIM or QMI. (I prefer MBIM)

for MBIM
AT+QCFG="usbnet",2

for QMI
AT+QCFG="usbnet",0

Reset the modem after settings: AT+CFUN=1,1
by Didneywhorl
Fri Sep 10, 2021 11:51 am
Jump to forum
Jump to topic

Re: I just received a MTK7621...

That is an H721 M2M. Here is the proper goldenorb firmware: http://aturnofthenut.com/upload/h721-GO2021-05-18-wifi.zip

Here is the last version I have from the manufacturer: https://drive.google.com/drive/folders/ ... sp=sharing
by Didneywhorl
Fri Sep 10, 2021 7:34 pm
Jump to forum
Jump to topic

Re: I just received a MTK7621...

You're getting there! Google drive links: You can right click on the folder in side drive (if you have any created) and select 'get link'. Gotta make sure its set to sharing the way you want too. Read up on the TTL article here: https://wirelessjoint.com/viewtopic.php?f=21&t=2752 Needed for Visi...
by mtl26637
Sat Sep 11, 2021 2:48 pm
Jump to forum
Jump to topic

Re: I just received a MTK7621...

I don't think you will have much luck with typical "IT" PC store. They may know of the networking side of things but i'm sure at this point you would know more about the "LTE" side of it unless they have experience already. At this point it could be several things such as comms (...
by Ruxl_Nefarious
Thu May 27, 2021 10:00 am
Jump to forum
Jump to topic

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

This worked for an EM160R-GL on Visible. Only change:

Instead of
- Set to 4g LTE only Command = AT+QCFG="nwscanmode",3,1

Use
- Set to 4g LTE only Command = AT+QNWPREFCFG="mode_pref",LTE
by Didneywhorl
Mon May 17, 2021 8:32 am
Jump to forum
Jump to topic

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

If you run AT+QPRTPARA=3, always follow it with AT+QPRTPARA=1

Has something to do with retelling the flash to save parameter changes in backup
by gscheb
Sun May 16, 2021 12:08 am
Jump to forum
Jump to topic

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

Below is an edit to the original instructions per some changes from Didneywhorl's post This should work for Quectel Modems EC25-AF, EP06 and EM12 Before you start this might want to set back to OEM state if you been putting other commands in to start off fresh. - Set modem to its OEM state Command ...
by megaplow
Mon Feb 08, 2021 9:53 am
Jump to forum
Jump to topic

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

Been connected for a few days now. It looks like my connection is solid. Thank you all for the help.
by gscheb
Thu May 27, 2021 10:36 am
Jump to forum
Jump to topic

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

This worked for an EM160R-GL on Visible. Only change: Instead of - Set to 4g LTE only Command = AT+QCFG="nwscanmode",3,1 Use - Set to 4g LTE only Command = AT+QNWPREFCFG="mode_pref",LTE Technically don't have to do that command if you didn't want too. Could just do this in its p...
by giant22000
Sat Jul 24, 2021 5:45 pm
Jump to forum
Jump to topic

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

Running at+cgdcont? is returning an error with my EC25-AF. Any ideas?
by Didneywhorl
Sun Jul 25, 2021 6:41 pm
Jump to forum
Jump to topic

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

giant22000 wrote: Sat Jul 24, 2021 5:45 pm Running at+cgdcont? is returning an error with my EC25-AF. Any ideas?
If you don't have a SIM card inserted, sometimes that happens.
by giant22000
Sun Jul 25, 2021 7:09 pm
Jump to forum
Jump to topic

Re: Visible + EC25-AF + GoldenOrb doesn't connect to LTE

Didneywhorl wrote: Sun Jul 25, 2021 6:41 pm If you don't have a SIM card inserted, sometimes that happens.
👍 Sim will be here tomorrow. Will update when it arrives.
by megaplow
Tue Jan 12, 2021 12:09 pm
Jump to forum
Jump to topic

Re: Quectel - Programming Carrier Bands and Groups of Bands

@BillA, Thanks for the info! You mentioned auto-scan, that seems a lot easier than using the specific band commands. The spreadsheet came up with the following commands: Band 2 = AT+QCFG="band",0,2 Band 4 = AT+QCFG="band",0,8 Band 5 = AT+QCFG="band",0,10 Band 13 = AT+QC...
by BillA
Tue Jan 12, 2021 2:53 am
Jump to forum
Jump to topic

Re: Quectel - Programming Carrier Bands and Groups of Bands

Is there a list of all the AT commands needed to set up the EM12g? I am looking to set up a EM12 on PagePlus. I looked at the spreadsheet posted above and decided quickly that I was in over my head. I do not want to brick the modem. Aside from the full list of commands, which bands are required for...
by megaplow
Mon Jan 11, 2021 12:04 pm
Jump to forum
Jump to topic

Re: Quectel - Programming Carrier Bands and Groups of Bands

Is there a list of all the AT commands needed to set up the EM12g? I am looking to set up a EM12 on PagePlus. I looked at the spreadsheet posted above and decided quickly that I was in over my head. I do not want to brick the modem. Aside from the full list of commands, which bands are required for ...
by lawnmowerman
Thu Jan 07, 2021 11:00 am
Jump to forum
Jump to topic

Re: Quectel - Programming Carrier Bands and Groups of Bands

Does that mean it will always use B4 as primary/preferred band? Well, the answer appears to be no. I noticed my internet was slower than usual, checked and found that the modem had selected B13, occasionally aggregating with B4, but definitely using B13 as primary. Sent AT command to lock onto B4 a...
by lawnmowerman
Thu Jan 07, 2021 8:44 am
Jump to forum
Jump to topic

Re: Quectel - Programming Carrier Bands and Groups of Bands

I used the Excel doc from the tutorial to generate following AT command to set the Quectel EP06 to look for B4, B13, and B66, in that order: AT+QCFG="band" +QCFG: "band",0x260,0x20000000000001008,0x1 Does that mean it will always use B4 as primary/preferred band? This is what I w...