Wireless Joint

I am not aware of any downloads for it, you never know though, there are prob only a few people that have been able to make firmware like this, netgear never released any or had any leaked that I am aware of and the people that are able to make it dont post it for public, they tend to like to sell s...

Threads are not the place to solicit services, the powers that be do like that.
Use the marketplace section of the forum
viewtopic.php?t=2696

lol
Be strong grasshopper

Look in the fcc docs, there is enough of a description you can know which is which.

mr1100 like most data devices is throttled and has several watchdog files to control its speed, they can't have you blazing a fast trail in the interwebs on 30 devices now, can they. Everything these days is about control, control for everything from how you can use your data to how you take a wiz. ...

I am getting an fx2000 sent to me by the weekend so next week I will know what it takes to get that one done and prob will be making a proper thread for it

ubi info for system and the modem UBI version: 1 Count of UBI devices: 2 UBI control device major/minor: 10:54 Present UBI devices: ubi0, ubi1 ubi0 Volumes count: 1 Logical eraseblock size: 253952 bytes, 248.0 KiB Total amount of logical eraseblocks: 1096 (278331392 bytes, 265.4 MiB) Amount of avail...

These threads in the open forum are not sales threads they are for dialogue, information and such.
I have an advert in the marketplace for services there is the link below


viewtopic.php?t=2696

I assume you are meaning in edl, if you are then Just treat it like an M5 and it will work

There is a trojan in this file - https://www.virustotal.com/gui/file/d44db61a7987e617283cc711c8bb0fe03286236ce948c250951701a7bc4a0e5f Do not download it or install it. OMG really dude? That is a false positive and it is because there is a batch script in the file, I made this tool and there is no v...

You wiped it thru FB so you need an mbn or what exactly are you asking for to restore it?

A place to find it, no, inseego keeps firmware tightly under lock and key

Yes there is

Well the first thing you need to do is to enable the comports so further work can be done to it, I did this by making modified firmware for it with the comports enabled, maybe you can find another way or do the same

Netgear LM1200 A quectel modem with a qualcomm MDM9607 chip IMEI, bands, MEID, pESN, FID and TTL are mod-able on it once you have root it is de/re-brandable and pretty much anything can be modded that it does. it has an android/linux os on one side and os2 on a triple stacked ubi over ubifs over mtd...

FX2000 / FX2000-3 This is the downsized version of the fg2000 is a lot easier to work on than the fg, for one it does not need to be disassembled to find bootloader/fastboot mode,. I have 2 of these both are the fx2000-3 variant so all the info below in this post is based on that model. I was able t...

Hi you will never get it done like that, fdt is for flashing factory files, such as .spk files which you will not be able to make. You need to use a proper loader and dump from 0 to 7ff then re sum it if needed and make it loadable, then you can write it back to the other one. "firmware" g...

This will get a dead mr1100 board back to emergency mode (9008)

The file did not have the needed components to be able to put together a recovery file, it needs to come from another working mr2100
If I get the needed files I will post a recovery file here to share with everyone for this one.

10 min or less watch your devices screen to see the progress

more info is needed for a proper answer such as, which part of the firmware, this devices firmware has 31 partitions some being mbn, some img, and some triple layered ubi, ( ubi over ubifs over mtd) but if you mean like a one click tool or something the answer is no, you have to dump then decompile ...

I made a file to downgrade these devices, mr6500, 6400, 6150, 1100, 5100, 5200 and soon 6550 This should restore the ability to use OpenMEP back to the device and for the devices that now have port 5510 closed This will reopen it for you making your device accessible again. I need some testers to te...

Yes it works

If you dont see what you type in putty type "ate" and press enter to turn echo on then you can see what you type

I have enough testers for the 6500, thank you to the testers, hopefully they will report back here with their findings soon.

try another model to see if it is just blocked on yours, tf devices are usually locked down fairly well

so before you open putty make sure the admin page will open (192.168.1.1) if it does try to log into putty 192.168.1.1 port 5510 if the cli opens then it is connected now type AT and press enter you should get OK in return if you dont then re-install putty and maybe try a diff version, or try the on...

Chaddosan wrote: ↑Sat Sep 23, 2023 1:48 am (I did receive a Floxif.H detection in the above file, which I cleaned - will that make any difference?)

that is a false positive, and no if you are getting a response then it is still working.
what device and firmware are you using?

OK so that device is the Tracfone variant it may be locked out of all MEP functions, but your 6110 should be working unless it is updated to or beyond 12.01.xx, if it is then it is prob already locked out also and would have to be repaired before it can work again. https://wirelessjoint.com/viewtopi...

1. I'm still under the return period. Should I keep this or is it going to be a headache? I haven't found many other good options. You should be fine. 2. Firmware: Device shows "Current software is up to date." But it does seem that there are newer versions out there (12.xx). Is 10.04.22....

compare what you find in those fcc docs to see if the 2 devices hardware is the same

The 100EUS variant has the bands you need, all of them.

This is the new flagship portable hotspot/router device for inseego, its a very nice device imho. I got one a few days ago and have been at it with this one since then, they made some changes from the other similar devices they boast. It has a 30 partitioned qualcomm chipped (SDX65) board with a sim...

dfu= device firmware update, it is the same as download mode that these Sierra devices use(your 6400 is a Sierra device) 9008 mode is the mode known as emergency and is the mode made for wiping/writing from 0 to the end 7ff if it is a 4k system or 1000 if it is a 2k system, your 6400 is a 4k system ...

Yes but I do not use qpst so it is not in format of qcn

So I got a mr6550 for a few days (I already had to send it back to the owner) But I had it long enough to pull what I needed to make a build from it, I loaded it successfully on a mr6500 and it ran without issue, got service, and overall looked good. I do not have time to test much, if a couple of y...

I have a dozen betas already, we dont want to over-do in case there is something wrong with it, which I highly doubt, but you never know. I made it along factory lines and only modified the update address so it cannot connect and update, everything else is factory 6550, if there is any issues it wil...

@ jericsmith I will answer your dm here, thanks for the info, I do not need anything else from it, it's not my kind of device I won't be getting one to fool with. I did have a look at the firmware it has a Qualcomm,cpr3-ipq807x CPU, and the image is a double stacked ubi based on openwrt, not my kind...

Still testing this I will update this thread when there is solid news that is confirmed, right now all I can say is it is loading and running with no problems on the 6500 and the 6400

You should be more careful before you try to flame and accuse someone publicly of theft or whatever you are trying to accuse me of here, I assure you I have made about 50 builds for this device, all boot logos and firmware mods were made by me I do not have any partner or other person I work with. I...

update:: since this is really a 6500 thread, it is the device that has given me the most trouble, it is now 100% working with port 5510 and MEP access again, before I was downgrading or trying to for this one I had to tick the version up to get it to work because of the device being fuzed now on the...

OK so if you did that it automatically erases the nv also and borks the factory backup part, so just loading the efs will not fix it and if you do get it fixed and do not fix the backup if you use the reset button or function from the menu then you will go back to bootloop. I can recover it for you ...

yes please contact me by email or my skype
live:kcphonestores_1
kcphonestores@gmail.com

This is working without issue running on any mr6xxx device but enabling bands is still having some trouble there are a couple of us working on it.

You should be able to boot it up without a sim so you can work on it without it updating.
I can kill updates for you if you need it.

If you have telnet then I can get you to fastboot mode which means remote loading is possible, thus downgrading is possible. edit: let me be more clear... do you have root or just telnet? if you have $ or # that is good it is root, if you have only AT commands via telnet with no AT!OPENMEP? working ...

Ok lets see if we can enable the ports again on it, you will need Flexihub on a Windows PC and don't bother to register an account I will send you a token to log in with. We will need somewhere to txt in realtime so I can instruct you my skype and my email which we can use for google chat are on my ...

Yes you can but it is kind of defeating the purpose of this since it is for people that buy these almost thousand-dollar devices then right after they get them they update and lock the owners out making them not unlockable or moddable/adjustable to use on the carrier of their choice or use the band ...

My email is in the first post here
viewtopic.php?p=27836#p27836
or on my profile page

HI no testing is done, everything is working properly

like fdt, swiflash can deal with both spk/secc and cwe files

Looking for the correct command to disable LTE for troubleshooting. Thanxs if it has a qualcomm cpu (I think it does x55) just use offline-D mode you can get to it by sending the dm command 290100 you may need to send the spc first if it does not respond send the spc like this 41 30 30 30 30 30 30 ...

wow I really mis cdmaws, I used it more than any other tool, my background is in cdma.
im going to send you a pm about something.

That one is kind of a rare one, I personally have never seen it, I own most other inseego models but not that one so I wont be much help, I did make a port tool that works on most of them I am not sure if it would work on that one for the adb port or not.