Wireless Joint

Your iphone7 has 4x4 MIMO antennas and a category 16 modem, with at least 3xCA capability. Your SIM7 is a category 3 modem with 2x2 MIMO antennas and no CA capability and limited bands in its list. I would get an thewirelesshaven.com NEXR5GO router and a Quectel EM12 modem (dont forget the minipcie ...

Its TTL settings, and the MOFI copied ours

Under Network-->Firewall-->Custom TTL settings

Its not making it look like a cell phone, its just changing the TTL, as that is the current way some carriers see the traffic as hotspot or on device data.

Hello,
Visible uses TTL of 64

Here is a link about Quectel visible setup

https://wirelessjoint.com/viewtopic.php?f=32 ... lit#p11658

You might start with this thread:
https://wirelessjoint.com/viewtopic.php?f=32 ... lit#p11658

Different model modem but a lot of the Quectel commands are common across their devices.

No worries. Most would prob feel the same way looking at the gear you rock with all day long. :) The biggest issue with these connections is that most of the info is hidden or too discreet to understand plainly. Visible likes to see MBIM modem protocol. AT command: AT+QCFG="usbnet",2 then ...

Hello,

Here is a link on how to set up Visible on Quectel modems
https://wirelessjoint.com/viewtopic.php?f=32 ... lit#p11658

Also include a messy file of mine that I use as reference on the Quectel AT commands.

Just make sure, based on your previous posts, we are clear on this new post:

You've got a Quectel EM12G, a Visible SIM that has been activated and confirmed working in a cell phone, and a NEXR5GO router with stock MOFI Paddle antennas? (I didn't see which antennas you have tbh)

My MoFi showed I had 2,4, maybe 5, maybe 13 and 66. I think 2 and 4 worked best at my house. How do you check? I guess I have to be connected to LTE to test that though right? Only way I know how to do it is lock it to one band at a time and see what you get. And right it down on a piece of paper. ...

kzaudio wrote: ↑Thu Dec 17, 2020 1:24 pm Someone said the APN might be wrong but not sure what it's supposed to be

would think if the apn was wrong you would get nothing no data thru.

kzaudio wrote: ↑Thu Dec 17, 2020 11:59 pm @Didneywhorl ... I guess I'm doing something wrong. Maybe day 4 will be my day. Thanks man.

Which antennas, that are connected to the modem, are you using?

@Didneywhorl I've been reading through posts and it seems several people are having issues with Quectel and Visible. Have you noticed this? I spoke to sales at The Wireless Haven before I purchased the setup and the rep said this was a good setup so I ordered it. I guess I'm doing something wrong. ...