Wireless Joint

A few things. Clear out your APNs by running AT+CGDCONT? Then for every one that it returns in the output, run the following commands to blank them out: AT+CGDCONT=1 AT+CGDCONT=2 AT+CGDCONT=16 etc etc Running the command like that says set info at position 1 (2,3,16,etc) as follows ... <blank>... an...

Leave it! lol.

QMI vs MBIM is kind of a moot issue. Go with what works.

Cool link. Thanks. I was trying to do it the hard way with google maps and math! Does it look like I set it up and interpreted it correctly? I really wasn't looking at the device type stuff...just the elevations. I put in the coordinates of my house and the tower. I set my side at 25ft installation...

You can still de-prioritized or data managed on plan data. Don't mean a hard throttle but data managed. Verizon is famous for it. They all do it but Verizon does it more in my experience where I live. Try running these speed test is the off hours and see what you get. Can use this link to run it whi...

Ok now that you know you using the correct band let me ask you this.... are you using the built in wifi on the NEQ6GO? As you may have read the built in wifi can be very substandard. I didnt believe it either when I read about it as I could stream 3 movies at once so how could that be bad. Well once...

Hello, You can't block a certain tower from your device. But you "kind of sorta can" if you are lucky about band selection. Using Visible there is a tower that is terribly slow. Has bands 13 & 66 on it. So what I did was set my band lock to 2 + 4 + 5. Since that tower doesn't have any ...

gaddman wrote: ↑Tue Feb 02, 2021 10:18 pm Result:

Code: Select all

...



ATI
Quectel
EM12
Revision: EM12GPAR01A17M4G
OK


...


AT+CGMR
EM12GPAR01A17M4G
OK

You've got some older firmware there. Maybe update it?

https://drive.google.com/file/d/1fxqOMY ... sp=sharing

... trying the deactivate command, I have tried that. Won't execute the deactivate no matter what we've done. AT+QMBNCFG="Deactivate" only works if the AT+QMBNCFG="AutoSel" == 1. Otherwise there is nothing to "Deactivate" In MBIM mode, the modem has not disconnected in...