Search found 6 matches

Return

by ChrisTork
Fri Apr 03, 2020 2:06 pm
Jump to forum
Jump to topic

WE826 with MC7455 updated firmware / wifi fixed

Thought I would just post this out there for people having issues with the WE826 WiFi always dropping out. Apparently in the openwrt versions < 19.07.2. There is a issue with the WiFi drivers that cause it to hang when high bandwidth devices are being used. This would require a hard reboot of the de...
by ChrisTork
Fri Apr 03, 2020 6:03 pm
Jump to forum
Jump to topic

Re: WE826 with MC7455 updated firmware

Basically just modified the conmon.sh file located at /usr/lib/rooter/connect Set the default track_ips="8.8.8.8" so it always has a value incase it gets cleared during the pings. A few lines below that was this check f [ -f "/tmp/connstat$CURRMODEM" ]; then <--- this would alway...
by ChrisTork
Fri Apr 03, 2020 7:17 pm
Jump to forum
Jump to topic

Re: WE826 with MC7455 updated firmware

Give this a try for the WG3526.
admin is the default pass
by ChrisTork
Fri Apr 03, 2020 9:32 pm
Jump to forum
Jump to topic

Re: WE826 with MC7455 updated firmware

It's based on the goldenorb 19.07.2 rooter build packages. https://www.ofmodemsandmen.com/buildpkg.html

Correct, No mods other than fixing the loop. I did set default ttl and settings etc. As I got tired of having to set them up everytime I flashed.
by ChrisTork
Fri Apr 10, 2020 9:45 pm
Jump to forum
Jump to topic

Re: WiFi Dropping on WE826-T2 w/ Sierra Wireless MC7455

The wifi dropping out was a bug with the driver on the version of openwrt currently as the base for GO or others. In version 19.07.2 this was fixed. I posted an updated version of GO that has this updated version of openwrt. My wifi has been stable ever since and the speeds now match what the ethern...
by ChrisTork
Fri Sep 11, 2020 5:09 pm
Jump to forum
Jump to topic

Re: WG1608/WG3526 2.4GHz and 5GHz WiFi Working with 19.07 Snapshot

@dairyman I got 2.4GHz and 5GHz working on the WG1608/WG3526 running the OpenWRT 19.07 Snapshot with the help of LGA1150 on the OpenWRT forum. I installed the snapshot over the top of the WG1608-GO2020-06-14 firmware, but that wiped out the Modem section in the GUI. What was needed was to use the W...