Wireless Joint

Good question! I haven't looked at mine close enough to tell and it did seem like more should have been in use. Interested in hearing what others have to say. It might be a limitation of router firmware too.

jose.herrera wrote: ↑Thu Jul 18, 2019 6:15 am I found a solution if anyone ever gets stuck in my position. I ran these commands.
And it defaulted to MBIM,but running the commands for qmi again were successful after the reset.

Nice detective work, and thanks for sharing!

jvon49 wrote: ↑Thu Jul 18, 2019 10:47 pm Any suggestions guys do you think it could be a firmware issue?

Since you have internet service from the CBA850LP6 to the other devices (i.e., PS4, laptop), it is doing its job.

I think you need to invest on a good WiFi router.

jose.herrera wrote: ↑Fri Jul 19, 2019 10:17 pm I used the command for EM/MC7455 which is at!usbcomp=1,1,10d and had the exact issue you did, but my modem is a EM7455 Not a EM7565.

I realized that difference after I posted about it.

So you were able to fix it?

I wonder if the previous modem was damaged/corrupted in some way? Well it's been sent back. I wonder if this has to do something with the new firmware which is on revision 26,as when I was using the other revision 23 or 24 was the most recent. It is possible that the VID/PID numbers were modified o...

I purchased a Sprint unlimited sim/hotspot through one of the Mobile Citizen vendors. Hoping to be able to use it in my em7455, however after experimenting for a while I seem to suffer from the frequent disconnects/instability that so many others have. I've read many threads on the issue and they al...

Please help. Having trouble getting my new WG3526 router to recognize the EM7565 modem. I get the disappearing text when I try to type anything in the AT Command box. Any advice would be greatly appreciated. I am very new to all of this. Device Information T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev...